Ubuntu :: Can't Print From File

Dec 8, 2008

when I give print command from the file it hangs and does not respond !

However I am able to print through 'lp' command.CUPS updates installed.

View 8 Replies


ADVERTISEMENT

Ubuntu Networking :: Connected Via Usb File Goes To Print Que But Will Not Print ?

Aug 14, 2010

Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.

View 1 Replies View Related

Debian :: Print Command ( Print A File ) In Debian Through Comand Prompt ?

May 5, 2009

I have a debian system installed on my pc . I have just saved a text file on my desktop . Please let me know how can i print the file through comand prompt ? I need to learn the printing the file thru comamnd line .

View 1 Replies View Related

Ubuntu :: Load A PDF And Print It And Only Said "print To File"

Feb 28, 2010

Here we go, error 4,384,239,283 in Ubuntu I was trying to load a PDF and print it and only said "print to file" So I go to System >Administration>Printing, and it says "Starting Printing." at the bottom, and then goes away... Sigh, anyone knows whats going on?

View 5 Replies View Related

Server :: Where Is The Spool File Stored When A File Is Sent To Print In Cups

Oct 28, 2010

I'm trying to setup a print server in Fedora 13. I've made it using CUPS and when I send something to print from a Windows PC it goes ok. My main concern is to know where is the spool file stored when a file is sent to print. I've seen in many forums that it is stored in /var/spools/cups. What I only see here is a file name c000XXX with some information about the printing job. I'm using hold print for this printer and before printing out anything I can't find the spool. I've tried cups-pdf and it stores a pdf file in a route but this is not enough for me. I need to know where the spool data is stored in order to know from who is the job being send.

View 1 Replies View Related

General :: Configure File Printer - Print To File

Oct 20, 2009

I want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.

View 2 Replies View Related

Ubuntu :: Print Out The Contents Of A File?

Feb 24, 2010

how do I print out the contents of a file?

View 4 Replies View Related

Ubuntu :: Print To Image File Instead Of .ps?

Jul 13, 2010

Is it possible to print a page to an image file (gif, jpeg, etc.) instead of a .ps? Not looking to take a screenshot, rather print an entire page.

View 2 Replies View Related

Ubuntu :: How To Print Entire .chm File

Sep 10, 2010

Ubuntu 10.4

I have a few .chm files that I can view in xCHM or other chm file reader programs.

However, what I really want is to just print out every page of the .chm into one big .pdf file. Then I can read it a lot easier and it is much more portable for me.

Does anyone know any command line or tool that can output every page of a .chm file, formatted, in order, to a PDF or just the Printer?

View 1 Replies View Related

Programming :: HUGE Files - Compare A List Of Patterns From One File And Grep Them Against Another File And Print Out Only The Unique Patterns?

Aug 13, 2010

I am trying to compare a list of patterns from one file and grep them against another file and print out only the unique patterns. Unfortunately these files are so large that they have yet to run to completion. Here's the command that I used:

Code: grep -L -f file_one.txt file_two.txt > output.output Here's some example data:

Code:
>FQ4HLCS01BMR4N
>FQ4HLCS01BZNV6
>FQ4HLCS01B40PB
>FQ4HLCS01BT43K
>FQ4HLCS01CB736
>FQ4HLCS01BU3UM
>FQ4HLCS01BBIFQ

how to increase efficiency or use another command?

View 14 Replies View Related

Ubuntu :: Change Print To File Defaults?

Nov 24, 2010

In 10.04LTS, when selecting print to file, the default settings are .ps, and home directory. Can those defaults be changed? I've looked around in CUPS, ubuntu-tweak, and searched on here, to no avail.

View 5 Replies View Related

Ubuntu :: Print An .odg File To Multiple Pages?

Jul 19, 2011

Are there any reliable ways to print libreoffice or openoffice drawings to multiple pages. I have two drawings I designed for 11" x 22" sheets, and I'd like to print one of them to 4x or at most 6x 8 1/2" x 11" sheets, without reduction.

So far, when I've tried this using "print to multiple sheets," the results have been erratic, and have basically wasted paper and ink with no usable results.

I can't even preview this.

I am using the old trick of creating a duplicate file, and creating for duplicate slides within it, making each slide one group, and using the alignment settings to make each slide match one corner of the original image. It works, but it is kinda clunky.

View 1 Replies View Related

Programming :: Print A Value To A File ?

Apr 12, 2010

I have this code:

How can I print &FARAchieved to a file? Or, printing the whole bioReturn would be fine too.

View 8 Replies View Related

Ubuntu :: Making Booklets - Print Document To PDF File?

Apr 3, 2010

I've seen lots of threads about this with complex solutions using things like PSUtils etc. but nothing simple and easy. Is there an easy way to print to a document to a PDF file so that it is properly formatted to be printed as a booklet?

For example, a 12 page booklet made up of A4 folded in half to A5 -
1st page = 12 & 1
2nd page = 2 & 11
3rd page = 10 & 3 etc.

So that when it is printed double-sided it comes out as a booklet. The site at the following link does what I want perfectly if I upload the booklet in single pages format, but it would be nice to have a simple way to do it offline in ubuntu [URL]

View 4 Replies View Related

Ubuntu :: HP Laserjet P1005 - File Processing But No Print

Dec 25, 2010

We have workgroup network in the home and the printer "hp laserjet p1005" connected at the server (OS : windows server 2003) and I am connected to the Internet by the server without problems. But when I want to print any file, it remains in (processing) and no print. It's picture for this problem:

View 9 Replies View Related

Ubuntu :: Print Screen When Hovering Over File Menu?

Feb 16, 2011

I'm making some instructions for colleagues at work. I want to add printscreen shots of the steps involved. I'm unable to capture the screen to the clipboard when I am hovering over, say, the 'File -> Menu'.

View 6 Replies View Related

Ubuntu :: Print To File On Document Viewer Don't Work?

May 1, 2011

Though I have to deal with a lot of new issues with respect to 11.04, I have a specific problem that I need to solve quickly. When I try to print to a pdf-file from a ps-file using Document Viewer, it appears a box that says:

"Failed to print document

Printing is not supported on this printer."

View 1 Replies View Related

Ubuntu :: HP Deskjet D-2660 - Can Print To File But Not The Printer

Aug 5, 2010

My HP Deskjet D-2660 will not print. I can print to file but not the printer. I am running Ubuntu 10.04 and have no other problems. I have installed hpip and hpijs form HP and cups was made available via and upgrade. I have a lot of data from var/log/cups/error_log but don't know what it is supposed to say.

I can print to file and everything else I check seems to say that all is right. Is there any glaring faults that I should look for?? As I stated on the other post I get a message that the print job has been sent to the printer and then another message stating that the print job has completed. In system/administration/printing, the printer shows up properly and has a green check mark on it. Connected to localhost shows at the bottom of the little window. Under /printer it shows shared and enabled Then under printer/properties, it shows as the HP Deskjet D2600 series the location is given as john-desktop It defines the Device URI: hp:/usb/Deskjet_D2600_series?serial=CN9ANDF0ZT05C9 shows the Make and Model HP Deskjet d2600 Series hpijs,.. printer state: idle

Across the bottom it theoretically allows you to print a test page or clean the print heads. (won't print) On the printing-local host small page that opens under system/administration/printing there is no group under that heading only new group or new group from selection. I never named a group since I am the only user.

I have shut the printer down and disconnected the USB and rebooted. Then connect the power and plug in the USB cable I get all the same answers nothing appears to change. Here is some of the var/log/cups/error_log file. It does this over and over every minute same thing. The print que is empty from both administration and applications.

[Code]....

View 2 Replies View Related

Fedora :: Print File On Top Of Page?

Oct 20, 2009

I have a lpt printer installed "hp officejet t65" when I print a file all the time on the top of the page appear the path of the file where is stored in my pc and and page 1of x. how to wipe off this information when printing a file.

View 1 Replies View Related

Fedora :: Print PDF File With Comments

Dec 19, 2010

How can I print a PDF file with comments (and highlights) on Fedora 14?

View 4 Replies View Related

Applications :: Firefox Only Print To File

Feb 5, 2010

Firefox 3.6 won't print with cups.

I'v found on this ore other forum a sollution But is there a better one.

I must add the line

But hen i can only print to the default printer.

Then i have to do lpoptions -d printername to set the other printer default.

it is good for now but looking fort better solution.

View 5 Replies View Related

General :: Unable To Print File

Sep 16, 2010

After adding a remote IP printer ,the printer print successfully the test page,but when i tried to do :lp -dprintername filename the following error occured:

unable to print file: client-error-document-format-not-supported - msg

View 4 Replies View Related

Software :: Print A Png File Across 5 Pages

Dec 31, 2010

I have a PNG image file that is 568 5766 pixels (W x H).

I don't want it to shrink, trim or anything.

It is wide enough for 1 page but the height should fit on about 5 pages.

So how do I make it print on 5 pages?

View 2 Replies View Related

Programming :: Print File Name In BASH

Feb 26, 2009

I want to write a script that returns me name of the files that begin with the specified characters. like

Script out should be

View 3 Replies View Related

Ubuntu :: 9.4 - Read Files (documents - ODT File (.odt)) And Print In Windows?

Jul 27, 2010

My friend have a pc with only Windows. She does not want to format it for Ubuntu but wants to have a temporal partition (without deleting the original-rented Windows machine) for Ubuntu. How can incorporate the Ubuntu (no demo) without altering beyond her pc?

Second, How can she read files of Ubuntu (documents- ODT File (.odt)) in Windows? How can she print the doc's when the printer only works for Windows?

Third, how can be deleted the Ubuntu from her machine when she be able to return the pc to thye dealer?

View 2 Replies View Related

Ubuntu :: Set Up An Print-to-file-printer With An Alternative System To CUPS?

Oct 4, 2010

Does anyone know how to set up an print-to-file-printer with an alternative system to CUPS? The quality suck on CUPS and there's NO solution, at least i didn't found anyone

View 3 Replies View Related

Ubuntu :: Printing Corrupted - Get Substituted / Print A Blank Space / Print A Box

Mar 23, 2011

Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.

I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.

View 2 Replies View Related

Ubuntu :: Cannot Print PDF Files - Print Preview Shows A Blank Page

Jun 5, 2011

I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:

Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault

Converting to .ps also is blank.

View 6 Replies View Related

Ubuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos

Dec 26, 2010

My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?

View 5 Replies View Related

Debian :: CUPS Failed To Print File In 7.8

Nov 10, 2015

I have installed cups(1.5.3) in my Beagleboard black based custom hardware running on Debian 7.8 using 'apt-get install' command. I am trying to print to HP deskjet 1112 usb printer from system line but nothing is getting printed and the output of 'lpstat -t' shows the error : "/usr/lib/cups/filter/hpcups failed "

The error_log output is :

I [10/Nov/2015:09:44:51 +0000] Saving job.cache...
I [10/Nov/2015:09:44:52 +0000] Listening to [v1.::1]:631 (IPv6)
I [10/Nov/2015:09:44:52 +0000] Listening to 127.0.0.1:631 (IPv4)
I [10/Nov/2015:09:44:52 +0000] Listening to /var/run/cups/cups.sock (Domain)

[code]....

Please find the response from CUPS administrators below:

As far as I see this has nothing to do with CUPS.As far as I see the first error message comes from Ghostscript: "Unable to open the initial device, quitting" (this is in Ghostscript's gs_init.ps file).Therefore Ghostscript does not produce any output which lets then the filter from HP's HPLIP driver software error out with "cupsRasterOpen failed" and finally the HP backend errors out with "ERROR: null print job".Neither Ghostscript nor HP's HPLIP driver software belong to CUPS so that the issue does not belong to CUPS (according to my analysis).

I guess that somehow the "Ghostscript command line" is not correct or does not work as it should.Usually this is alos no bug in Ghostscript but "some where else" where the Ghostscript command line with all its parameters is created.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved