I have always used the same programs to burn media in Ubuntu -- Brasero and DVD/CD creator. But after Natty install I get all the actions of burning media and then things hang at the last part with "Creating image Checksum" and the computer just goes into a loop forever increasing the time remaining. If I cancel and eject, the media is invalid. It won't mount and show files.
View 4 RepliesI am using rsync to create rotating snapshot style backups of my web files and sending them via SSH to a remote location in order to burn them for offsite storage. This is all working perfect. The remote machine is a Windows Server 2003 which has data that I combine with my web files before burning. I have cygwin installed on the remote server in order to archive and compress the entire backup using tar. (This is not a post about cygwin, I just thought I would mention it in case anyone was wondering how I was running Linux commands after transferring it to the Windows box). After compression, the backup is over 12gb. The next step in my process is to split this tar.gz file into smaller chunks in order to burn them to DVDs. I use dual layer DVDs which are 8.5gb storage size.
I also use cygwin to split the tar.gz into multiple 2gb files using the split command. When I burn them, I only put 3 files on each disk totaling 6gb to leave some padding in case this was a problem. The burn completes and says successful, although it errors out when in verification. I have tried this multiple times and it seems to fail verification at the same point every time which leads me to believe that it has something to do with the data. I have also done tests such as creating smaller backups with completely different data and brning that to a CD-R which worked fine, so I'm convinced this process can work, I just cant get it to work in the right situation. I have also tried burning one of the 7 split files to a dual DVD which also worked fine. I'm wondering if their is a chunk of data that is causing this problem in one of the other split files?
I am trying to burn a few video files to dvd using brasero, but after the burning process is about half the way through it simply disappears with no error at all. Only the terminal says
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
**ERROR: [brasero] Horizontal size is greater than permitted in specified Level.
How to burn my videos now.
K3B burning data and ISO files. Disc Media:Datawrite DVD & CD Discs
Old Box
OS: WinXP Pro SP3 32bit
Burning Software:Nero 7.0.1.4
Mobo:Asrock P4V88+
Processor:AMD AthlonXP 2800+ Single Core CPU
Memory:2GB DDR
Optical Drive:NEC DVD RW ND-4550A (2x, 4x & 8x write speeds)
[Code].....
My Current / Old box (WinXP)can burn 2.9GB of data over a LAN from a mapped drive using Nero in 7 minutes and maintain file & directory names as they are complete with upper and lower characters, spaces between words and special characters without shortening file / directory names out of the box. My new box (SuSE 11.2) was initially incapable of burning anything, ?Access Denied? I added the user to the cdrom group this allowed the burning of data but the process changed file and directory names. It changed all letters to capitols, replaced blank spaces and special characters with underscores. I still can?t burn ISO files, ?Access Denied?. The time it took to burn the 2.9GB of data on the hard drive of the SuSE install was sort of acceptable but a full 5 to 6 minutes longer and I was forced to shorten file names too.
I changed a setting to allow the full ascii character set hoping this would preserve file and directory names as they are during the burn process. I changed a setting to allow long file names too. I now have another problem, on starting the burn process and after a minute'sh K3B displayed the fact that it was going to take over 1 ? hours to finish! Yikes. After an hour it was going to take a further 2hrs and 10mins. This didn't include read varify. I aborted the burn process, this can?t be correct. I placed the LG drive in my old box, burn process took a second or two less than 7mins to complete using the same data over the same LAN. I've tested the drive for hardware errors, the drive is perfect. Am i missing something, failing to do something or doing things wrong. Is the optical drive or some other component incompatible in some way.
I'll be burning many gigabytes of data on a daily basis and i'm hoping to be able to burn a full DVD disc of mixed data types in less than 10mins whilst preserving the full ascii character set, file & directory names inc special characters and blank spaces. I still need to resolve my "access denied" problem when trying to burn ISO files too.
I have a folder called VIDEO-TS filled with .vob files and other things. I did it before, but don't remember what I used to make it a regular dvd video. I tried Devede, but when I drag the folder to the app, it says "folder contains non-vob files and can't continue" or something like that.
View 1 Replies View RelatedI am running Ubuntu 8.04 (installed by CD) and an .iso file for Ubuntu 10.04. Normally, we can upgrade system via internet. But it always takes much time to get it, with me it's around 2 hours @_@. What I need is saving time by upgrade the system from what I have (iso file), not via internet.
View 10 Replies View RelatedI've got following problem: need to burn files which are spread through several directories, have names longer that 32 chars, and the chars like " " (space) nad other strange are allowed in the names of files. The file sizes are about 300 MB up to 1.5 GB (perhaps more). I want to burn .iso images (not on fly). I'm not using any graphical interface, so programs like k3b are not allowed.
View 8 Replies View RelatedI have noticed that the files and folders search in Unity, only shows up those files which have been amended (or possibly just opened) since the install.
i was wondering if there was a way i could have the search index (or something vaguely equivalent) all the files on my machine. This is especially important given that i reinstall the OS every six months on a new distribution cycle, copying all my old files across.
Without being able to see my old files the search is pretty much reduced to a recent history search.
I am newer to Linux ( using Ubuntu 10.04) : I have noticed that during replacement of a file , no date and size of the new and old files are shown in the dialogue box so how to show that ( like the one in windows)
I know that it is easy question , but i really don't know how to do that , by the way I have checked folder preferences and system --> preferences but i did not find something for that
I would like to know how to show all the current mount points in the file system. I tried mount but it didn't show the nfs mount point.
View 5 Replies View RelatedI just discovered that you can automount an ext4 filesystem with acl enabled by running "tune2fs -o acl". (I knew about tune2fs but did not dare to use it until now). However, the acl mount option does not show up in /etc/mtab and /proc/mounts. Can I ignore this, or is there a way of telling the system about the actual mount options?
Edit: I can do "tune2fs -l <device> | grep acl | awk '{print $4}'" and if that isn't empty I can update /etc/mtab with "mount -f -o remount,acl <device>", but like the udev rule I previously messed with this seems lumberingly unelegant to me.
I have just recently installed opensuse 11.2 (on a seperate hdd) on my file server. I have a highpoint rocketraid card in the system with 4 x 1.5tb HDDs. I'd like to get my RAID5 showing up without loosing any data? Is this possible??I have been following this post over HERE
/proc/partitions
major minor #blocks name
8 0 1465138584 sda
8 16 1465138584 sdb
8 32 1465138584 sdc
8 48 1465138584 sdd
[Code]...
A couple months ago, I created a dual boot between Windows 7 and Ubuntu 10.04 using wubi. I then upgraded to 10.10. What would usually happen is I would start up my laptop and it'll go to the Windows boot manager, letting me choose between Windows 7 and Ubuntu. If I would choose Ubuntu, it would go to a GRUB boot manager. It would let me choose between several different ways to boot Ubuntu, mainly that there were different options that were all the same except they had different numbers in the name, i.e. Ubuntu, whatever, 14.33.22.19.25 or something like that.
A couple weeks ago, I updated to 11.04. At first it worked good, but then a couple days later I updated a bunch of packages. It tried to CAT a GRUB file and failed. It gave me an error code, but I ignored it. Yesterday, I updated again, but since last time failed, it told me to do a partial upgrade. This I did, and it was successful. But now, everytime I go to GRUB and try to select any of the options, it tells me "Error: File not Found" and I cannot boot into Ubuntu. There are recovery versions for each choice, and using these I can boot into Ubuntu in low graphics mode and I can also get to a command line prompt.
The MD5SUM file on the ubuntu-11.04-alternate-i386.iso disc is wrong. It has an incorrect checksum of 2 files and 18 that are missing or have incorrect names. I'm checking these from a Windows box but that really shouldn't matter. The two incorrect hashes are:
Code:
543f56d91223039621db4cf3b50dde37 ./install/netboot/ubuntu-installer/i386/pxelinux.cfg/default
0ae389801f547ccf19bd6f63c0ab3b7d ./install/netboot/ubuntu-installer/i386/pxelinux.0
I'm showing an MD5 of D41D8CD98F00B204E9800998ECF8427E for both files...
These are the files which appear to be missing or misnamed (the ones I checked appear to be on the disc but are named incorrectly):
Code:
./pool/main/x/xserver-xorg-input-synaptics/xserver-xorg-input-synaptics_1.3.99+git20110116.0e27ce3a-0ubuntu12_i386.deb
./pool/main/x/xserver-xorg-video-nouveau/xserver-xorg-video-nouveau_0.0.16+git20110107+b795ca6e-0ubuntu7_i386.deb
[Code]...
I do monthly reports by copying the previous document, update the text and change the images. The images are the same size and numbers each months. Since last month I upgraded my laptop to Natty and suddenly my document went from 942 kB to 10.1 MB in .odt. When saving to PDF the usual size of 472 went up to 1.9 MB. I have searched the net and the forums but haven't seen anything about a similar issue.
I'm not sure if it's an issue that is from the previous document being produced in Open Office and now updated and saved in Libreoffice. Or if it's somehow something to do with the upgrade from Maverick to Natty. I would hope I don't have to uninstall Libreoffice and install Open Office as a solution (which I understand is not entirely easy in Natty, something I read about Open Office being transitional to Libre). I can't email simple documents to customers that's over 10 MB large...
i get this message when i try to open my folder with the filemanager supplied by xubuntu.
Code:
Fehler beim Untersuchen der Datei /home/michael/.gvfs mit fstat(): Der Socket ist nicht verbunden.
A quick google search didn't bring results. What does this mean and how to fix it?
After upgrading to Natty Narwhal my Crypt Keeper app will not launch. I am now unable to access secure files. Has anyone had this issue after their upgrade to Natty Narwhal? If so, How were able to resolve this issue.
View 2 Replies View RelatedThere are some hidden files in my desktop..How do i make them visible?
View 2 Replies View RelatedI created an image and then saved it to my desktop as *.jpg
It doesn't show on my desktop anywhere. However, when I click to upload from my desktop to a website or to 'insert' and attachment in my email program and browse to my desktop, it shows that it is on my desktop and all works fine.
I have a feeling the * is the problem in the name and I would happily rename it if I could only get to it from my desktop but I cannot at all.
Any ideas how I can fix this?
Nautlius doesn't show all the files that are in a folder From the screenshots below you can see that there are more files in the folder (ls from the terminal shows them all), however nautilus doesn't. Other .mkv files show up in other folders so its not that
I've tired turning off previews and that didn't work. Running nautilus as root didn't work either
I want hidden files to be hidden, so I open the folder that has the hidden files in it and select View, and untick "Show Hidden Files". However, when I access the folder again the box is ticked and the files are showing. How can I get it to stay hidden permanently?
View 5 Replies View RelatedI am using the 32bit version of ubuntu desktop 10.10. When I download a video on transmission and copy it to my 2gb iball pendrive the movie file doesn't show up on ps3. The file is compatible with my ps3 no question about that, it works fine when i re-downloaded it and copied the file to the same flashdrive using xp.
View 2 Replies View RelatedA rookie Ubuntu user, I foolishly downloaded iTunes and ever since that install (which has since been undone), my folder system shows a black background. The only way to see the files is to click and drag my mouse over the files in the system. Is there a way to fix this? I've attached a screenshot for clarity.
View 1 Replies View RelatedI have a problem, my filesystem seems to show random corruption. For example:
[code]...
This has happened to many files, they suddenly contain random garbage. Fsck seems to say the filesystem contains no errors I tried to run it multiple times.
I somehow managed to screw up my lucid lynx system so that all files show up under Nautilus properties as Type Plain Text. When I double click a file, any file, the system tries to open it as plain text with gedit. Everything worked correctly until yesterday when I tried to install a new version of PyQt4. If I reboot with an old (karmic) version of Ubuntu and bring up Nautilus Properties on the same file (my data partition can be opened in other OS's) the files show up with the correct file type (PDF, ODT, etc) So the problem is not in the file itself, but rather in the lucid OS, which is mis-interpreting the file type. As I said I somehow messed it up when installing the new version of PyQt4.
View 7 Replies View RelatedI (for curiosity's sake) am running du -a inside /usr/lib/git-core and it does not show results for all the files in that directory. Why does it leave out an arbitrary set of files?this is what cd /usr/lib/git-core; du -a returns:
4 ./git-merge-resolve
972 ./git-config
12 ./git-show-index
[code]....
I have a question on using diff. I have two files that contain directory/file listings: d11.lis and d11.lis from a previous day. I am not interested in files that changed, or were added, I just want to see a list of files that are missing on day two.
View 5 Replies View RelatedMoved to Linux - General (mods please delete this thread).
View 1 Replies View RelatedI mean, when you search through the bar in Nautilus, how do you make it search for hidden files too?
View 1 Replies View RelatedAfter I used Ubuntu Tweak to clean up ALL the config files, I retsrated and Grub won't show the menu anymore. I'm still able to get to the latest kernels though but I want to log in to my windows.
View 2 Replies View Related