After suspending my computer, the battery icon doesn't work anymore (nothing happens when I put my mouse over it and it doesn't detect wether the computer is plugged in or not). Also, the brightness of the computer doesn't change when I plug/unplug the computer. All of that works fine before i suspend the computer.
View 7 RepliesI just got new netbook for christmas and so I promptly set it up with a dual boot system cause Windows 7 starter is garbage.Anyways after ditching the Netbook Remix because quite frankly I found the Unity setup to be quite garbage. Nothing worked the way I wanted it to and I found it quite annoying.So I ditched it for the regular desktop version. I quickly found that the battery indicator didn't work.
I removed and re added the indicator panel. Nothing. killed the gnome panel and restarted it multiple times. still nothing. Restarted multiple times. nothing. I even reinstalled gnome-power-management to no avail. I also installed laptop-mode-tools and nothing has worked. I went into the power settings and set it to always display the icon and it simply showed a lightning bolt as if there was no battery and it was a tower computer.
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies View RelatedI just upgraded to Ubuntu 11.04 on my Acer Aspire One netbook and no longer have a battery applet on the top bar. I used to have one on 10.10 but not now that I've upgraded ... I have tried going into power preferences and i couldn't get it to work.The Power Manager options suggest that there is no battery present which is obviously not the case...
View 6 Replies View RelatedThe battery icon on the top panel is really small and ugly. woud assume I just gotta change the size of the icon file, but I have no idea where to find that
View 4 Replies View RelatedI've recently installed Squeeze on my laptop. All was fine (except for a small change I needed to make to the GRUB code in order to install and boot it) and I find the OS easy to use. I am sure I will be using it for a long time! I might even change my desktop over to Squeeze as well - I'm using Linux Mint 10 at the moment.I have found just one minor problem: the battery icon continuously shows 100% full, even when the indicator on the laptop is showing that it needs recharging - after about two hours' use.This has not happened before:although the laptop is about two years' old, I have had this battery for only a month, so it has not yet done much work!
View 4 Replies View Relatedwhenever i restart my laptop my battery icon disappears from the panel.
compaq c785tu
I installed ubuntu and i love it but i got some question
1) How do i get a icon which says and indicates how much battery time i have left
2) [url]
If u go on that link a lok at that video and go on arounf 4 min ulll see that the person had somee amazig 32 desktop woth eyes and his mouse is like fire and water, also i have 3gb ram and n ubnntu it shows 2.75.
Last night I upgraded to the 10.04 development release, and I am pleased with what I see so far. I ran into a problem, however, with the power manager.I am using an MSI Wind U100.
First, I have lost my battery icon from the notification area. It reappears if I plug in, or unplug my AC adapter.
Second, under, "Power Management Preferences" I have lost my "On Battery Power" tab, leaving only, "On AC Power" and "General"
If I wait about seven minutes, the battery icon will appear in the notification area, but the tab remains lost.The problem is due to update. I have confirmed by installing a fresh 9.10 and upgrading again to 10.04 without making any other changes to system.
I haven't got Lubuntu as such, I've installed LXDE to try it out with Ubuntu 11.04 sometimes. For it to be practical for me I need the battery icon and Network Manager on the panel. I'm assuming this can be done easily enough as Linux Mint LXDE has got it, or Network Manager at least. i need NM to easily start my Mobile Broadband dongle's connection.Also, can touchpad tapping be turned off in LXDE, and how? I have it set up to have no tapping in regular Ubuntu but this is undone when I boot LXDE.
View 5 Replies View Relatedeven after applying the patch from this thread [URL] my battery is still not displaying an icon and a tab is not present on the power manager. I use an ibook g3 dual usb. though i didn't restart after applying the patch as it was not mentioned to do so.
View 1 Replies View RelatedI'm trying to add .desktop file for my application but I'm stuck with very strange problem.I created 48x48 icon for my program called etmmanager.png.I created .desktop file according to specifications:
Code:
[Desktop Entry]
X-SuSE-translate=true
Categories=Application;Utility;X-SuSE-TimeUtility;
Comment=ETM Manager for time logging
Exec=etmmanager
code....
My problem is that icon is not working in menu! I can find my program in Utilities->Time->ETM Manager and this is what I wanted, but there is no icon for the program.
It starts working if I specify absolute path in etmmanager.desktop file like
Code:
Icon=/usr/share/pixmaps/etmmanager.png
About my system - Opensuse 11.1 KDE 4.2
I'm running Windows 7 Enterprise and noticed something new. The system icon for battery life is showing "plugged in, not charging." Does this oddity occur in Fedora too?
View 6 Replies View RelatedI've just installed 10.04 and everything seemed to work fine. I am running it on a Q-Force laptop. The moment I removed the electricity plug though, my laptop shut down in less than 5 seconds. I'm guessing my battery isn't fully recognised. When I check the power management menu under battery, I get all information. Status = fully_charged.
View 3 Replies View RelatedI just updated my Ubuntu to Maverick Meerkat and it seems that now the battery monitor doesn't work. It shoes the icon on top and the battery icon gets full while the battery charged but it doesn't say the percent, it just says Laptop battery (estimating...)
View 1 Replies View RelatedI'm running Linux 2.6.35.4 on a Kontron COMExpress board. The device has 2 battery slots so that a user can hot swap batteries while the device is running.The problem I'm having is that battery information is never updated in /sys unless I read /proc/acpi/BAT[12]/state.When booting the device, the battery state is correctly detected by the kernel but after that it seems like nothing happens.
My current solution is to poke at /proc from time to time, it works but I'm forced to compile my kernel with CONFIG_ACPI_PROCFS_POWER which is marked as deprecated..
The Time and Date at the top docking bar is Hanged. It shows Mon, Oct 18, 6:35 PM. That's all. But when I click on it, it shows correct date in Calender. And correct time in the bottom. I believe those gadgets are not updating at all. Cause my Battery indicator is also not working.
View 2 Replies View Relatedwhen running on AC-power, only on battery.When I have my laptop on battery, and I plug the mouse in, then the USB mouse is working if I keep moving it around. If I then lay it alone for 5 secs, or so. it stops working.I cannot get USB sticks to work as well.
View 3 Replies View RelatedKarmic 2.6.31-22-generic, Asus M3N78-EM, MCE remote with USB/IR dongle, latest Bios, Bios PM enable and set for suspend S3. IT will suspend but I need to depress case power button for it to resume. I want to use my remote control, I also can not get it to resume from Keyboard/mouse (See Note Below). Only suspend and power button work.
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]....
My suspend and hibernate buttons are not working. When I try to return from a suspend, I do not get a kernel panic, but nothing loads onto the screen.
View 7 Replies View RelatedI just built my new desktop yesterday, I got elementary Jupiter (built on Ubuntu 10.10) installed and running fine on it, everything works... except for when I tell it to suspend
Upon selecting suspend, the monitor goes black for all of about a second and then comes straight back to the lock screen, pretty damn irritating.
I'm running a 64 bit system on kernel 2.6.35-30.
I am using a Fujitsu Amilo pi3560 with a Realtek rtl8172 wireless card, and running the latest driver (rtl8192se_linux_2.6.0014.0115.2010). The OS is Ubuntu 9.10.
Everything runs perfectly - when my laptop is connected with the power cord. But when I go battery the wireless disconnects after a few minutes. It then asks for the wpa password, searches for the router, asks again, and so on indefinitely, until I reboot and it all replays once more.
Just installed 9.10 followed by a 10.04 upgrade (wouldn't work as a 10.04 clean install). The install and upgrade all seemed to go well.
But now when booting I get a message saying "checking battery state" and then it boots no further. This is a laptop without a battery installed, running permanently from the mains through the charger.
How can I disable this check so that the laptop will still boot without a battery fitted?
I'm trying to make my system automatically shutdown once the battery level is low, but still without success. I've tried kpowersave, gnome-power-manager, kpower, klaptop but none of these worked for me. Well, I can't imagine I would be that stupid, but simply it doesn't work. In all cases mentioned above (kpower, klaptop, gnome-power-manager) I've tried to setup the laptop to shutdown once the defined level is reached, but the laptop never actually switched off unless all the battery was drained.
Btw. I think all the above mentioned apps only work once the user is logged in. But I'd like the solution to work also when the PC is on without anyone logged in. I thought I could write a bash script based on parsing of acpitools output and define it as a service, which would monitor the battery level, but I simply don't believe there isn't any functional solution to this.
Suspend in Karmic has stopped working. It freezes the computer and I hard reboot is needed. Does anyone know of a solution?
View 1 Replies View RelatedComputer is an ACER Power F6, BIOS AMI F6, XPPro installed, C only 80 Gygabites, 2 Gyg RAM, 3000MHZ Pentium4.today I installed 10.0.4 from Canonical 32 bit, all was ok,I followed the suggested dual boot partition and proceedings,which gave XP 44 Gyga and Ubuntu 37 Gyga ,successfully finished install,rebooted and began updating and customizing with great zest as I was really happy about this new version. then I decided to make a break of an hour and thought : 'let's try now the suspend function as i read about it not working properly sometimes'.....so an hour later i tried to revive from suspension,but the pc remains utterly insensitive and black.Tried Del to get into BIOS,F12 to get to boot config,BART PE disk i made for an XP machine in the past, and tried to boot again from the live Ubuntu Cd .....all in vain.I suspect it might be the fact the BIOS was set by me for
1st Floppy
2nd CDROM
3rd HD or PenDrive
as this machine I inherited since a few days dates back to 2006 and has no burner only CD-DVD reader and Floppy is disabled in BIOS.After Ubuntu install the machine stopped for a long time on a black screen with white reading about errors during install,then I reset it and it seemed like a good install anyway.Apart from checking if the HD is still ok,what can I do or try in such a situation?
When I try either one I just get the lock screen where I have to enter my password to return to my session, but the computer never suspends or hibernates.
I've installed nvidia dkms support.
After upgrade from Hardy to Lucid, wireless card (Atheros Communications Inc. AR5212 ) was extremely slow and not really functional. I installed the madwifi driver following the instructions from Ubuntu Wiki and wireless works now. But, after suspend Network Manager nor Wicd could scan for any wirelss networks.
I found a workaround: in console, run "dhclient" and, magically, while the scan for Ip address is going on, suddenly also Network Manager starts connecting to my default access point!
I have two problems, that I can live with, but they are just annoying for tha afact that I don't know how to fix them.1. My suspend does not work. Hibernation works - after I turn on after the hibernation, screen is blank, I have to move the mouse for the login window to appear. For Suspend, I get to the black screen, but then nothing happens - when I move the mouse or Ctrl+Alt+Backspace, nothing. It is a laptop, if that makes a difference.2. When booting, I get a table of choices - the new kernel, the old kernel, memtests and the long gone windows partition. There is no /etc/grub/menu.lst and I've got no idea how to change this.
View 5 Replies View RelatedEDIT: I found my problem--the box next to headphone box had been unticked, and I feel like a total doof for not having found that during my first two hours of trying to fix this. But I could still use some help figuring out my suspend problems issue--I've heard constantly turning a compy on and off is bad for it somehow.
A couple days ago I attempted to put my computer into suspend mode. When I used regular Ubuntu, this seldom worked. My hard drive would continue spinning, and the computer would not come out of this state until I cut the power and restarted. I thought it might be worth giving a try in Xubuntu, but I ran into the same problems, only this time, the audio would not work when I booted up.
I'm using the 64-bit version of Xubuntu, and this is a relatively fresh install (within the past two weeks) from the version 10.10 DVD, so I haven't had too much time to fudge up the settings yet, so I think it might not be entirely my fault. (: I've checked the hardware, and everything is plugged in and turned on, and I'm getting sound when I boot up Windows.
I may have done something afterwards, though. My first attempt at fixing the problem was to follow these instructions, but I really didn't understand entirely what I was doing. I tried fiddling around with the alsa mixer, but that didn't help me at all, and now it has even disappeared from the upper right-hand corner of my screen--on the toolbar. (If there's a way I could get that back and restore the default settings, [EDIT: I found alsamixer in the applications menu.]
I'd like to have audio working again, but I'm not really sure what's wrong or how to fix it. I'm still reading through Introduction to the Command Line, but as my previous attempt to solve this issue shows, I'm not smart enough to be afraid of entering commands in that I completely do not understand (yet).
Processor: 2x AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
Audio Adapter: HDA-Intel - HDA NVidia