Ubuntu / Apple :: Keybodoard And Mouse Stopped Working?
May 28, 2010
I have Ubuntu 10.04 installed in dual boot with Mac OS X and it did work properly for a while. But after installation of ssh, gdesklets and perhaps some other general software, the mouse and keyboard stopped working.
As I restart the computer and start ubuntu normally it proceeds to the login screen, but the mouse and keyboard are not working there. Pressing Power-off button on the computer box brings up the count-down menu and it switches off in 60 seconds.
An attempt to use the rescue mode or the older release (from 2.6.32-22 to 2.6.32-21 - the only ones I have) leads to the same results (in the rescue mode the power button does nothing though).
Mac OS works alright (I'm using rEFIt boot manager).
View 9 Replies
ADVERTISEMENT
Jan 14, 2010
I am having a weird issue where my brightness keys on my macbook v4.1 work, but for some reason the brightness notifications have stopped working. I can clearly press the buttons to reduce and increase the brightness, but no notifications. Network manger, sound, firefox, amarok notifications work, but not brightness. It did popup, but I am note sure when or what update broke the notifications.
View 9 Replies
View Related
Feb 28, 2010
I hit Ctrl alt backspace, the black screen whit cursor appears and seems that run forever so rebooted, but mouse isn't working.
View 3 Replies
View Related
May 6, 2010
After upgrading to Lucid, Mouse Keys started working erratically. For example: If I keep pressed the 4 numpad the pointer doesn't move, however, when I press 5 the click happens where it should. In short, the mouse pointer doesn't reflect MK's movements.
View 2 Replies
View Related
Aug 17, 2010
My wireless mouse stopped working about a week after i bought it. i replaced the batteries, and tried restarting my computer. I also tried putting the receiver in all of the other usb ports, to no avail. Where is the driver software that was installed when the receiver was plugged in located on my computer? I plan to un-install this and hope that it works when it is installed again.
View 1 Replies
View Related
Aug 25, 2009
I am running 8.10 64 bit on my laptop and when making a new user I noticed that on my shell prompt, it said "I have no name!". It was bugging me so I logged out and went to log back in. I got some error saying I was logged in for less than 10 seconds after trying a couple times to login. So I restarted and now my mouse and keyboard don't work!
View 1 Replies
View Related
Sep 21, 2010
My mouse wheel stopped working after a package manager update.I'm still running 8.04 (yeah, yeah, I know, will be updating soon). I can't seem to find a "package manager update history" so I can see what got updated when I did that just today (changes can't be more than 24h old).I tried rebooting/cold boot just in case.I check xorg.cfg, but it hasn't changed since march of 2008, so I figure nothing overrode the config.
View 5 Replies
View Related
Oct 1, 2010
After upgrading from 10.04 to 10.10 I have a big problem that makes ubuntu unusable. It seems like my left mouse button has stopped working. Left mouse clicks are not registered (although right clicks are). I've tested with 3 mouses (all USB, 1 wireless, 2 wired) and all show the same problem. All three mouses work fine under Windows 7 on the same computer and under ubuntu on different computers.
Right now I can't do anything, does anyone have a good suggestion how I might go and start troubleshooting this?
View 2 Replies
View Related
Oct 12, 2010
After I updated to 10.10, my ps/2 keyboard and mouse stopped working when in the gnome environment.I have tried to solve this by following the instructions here:
http://ubuntuforums.org/showthread.p...mouse+-working
. . . and by turning off usb legacy in the bios
. . . and by running these commands:
Code:
sudo update-rc.d -f gdm remove
sudo update-rc.d gdm defaults 25[code]..But nothing has worked so far.
View 9 Replies
View Related
Mar 22, 2010
I did an update yesterday and since then my mouse stopped working.
/var/log/messages contains:
Code:
Obviously the mouse is recognized but still does not work.
View 9 Replies
View Related
Jun 16, 2010
My keyboard has suddenly stopped working in Gnome (Ubuntu 10.4 LTS, Toshiba satellite laptop, P300). It works fine to logon, and with KDE.
The last thing I did before it stopped working was to hold down a shift key for too long, while I was thinking about what I wanted to do. The 'sticky keys' prompt popped up, which I killed. After that the keyboard has died - in *all* applications (e.g. gedit, terminal etc.)
The mouse still works. If I logout of Gnome, it comes alive again to type in the logon password. I had a look in messages, but without any enlightenment.
View 2 Replies
View Related
Feb 2, 2010
I just noticed that highlighting text and middle button clicking no longer copies and pastes as it has it has been for years. I haven't upgraded anything or installed any new software so this is a bit confusing for me. How I may restore this function? BTW, it doesn't work anywhere, terminal, firefox, etc. For clarity, the mouse itself works, I can point, click, etc... it is just the copy/paste function that has failed -disappeared- Using Suse and KDE desktop
View 9 Replies
View Related
Sep 30, 2014
I have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code:
Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko
[ 3.158099] usb 6-3: Manufacturer: Cideko Inc.
[ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2
[ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
[Code] ....
View 3 Replies
View Related
Jul 21, 2010
After booting up from the cd, I noticed that neither my wireless keyboard or wireless mouse were working. after a while a different screen came up that allowed me to use my keyboard arrows to choose "try ubuntu without affecting your system". So I choose that option and got to the desk top but then i had no use of the mouse or the keyboard at all. I then ejected the disc by quickly pushing the power button in the back of the iMAC and once the disk was out was able to restart the computer.Now i am in a black screen that says that there is no bootable drive.I know about the option key at start up, but that is apparently not working because my keyboard is not being recognized
View 1 Replies
View Related
Mar 23, 2011
1) Keyboard number keys on the right side, including backslash, plus, minus, etc. stopped working. The rest of the keyboard seems okay. It's not just this keyboard, either, because I plugged in my other keyboard and it has the same problem.
2) My mouse seems to have an intermittent problem in which it stops working for a few seconds or a minute. I can move it around the screen but I'm not able to click on anything. Sometimes if I wait long enough, it returns to normal. If I logout using the keyboard commands and log in again, it seems okay, at least until the next occurrence.
I'm running 10.04 LTS Lucid Lynx. I installed a kernel update a couple of weeks ago (2.6.32-29) but I've gone back to -28 in the hope that it would solve the problem. It has not. Is there a software package I need to reinstall or some other way to revert keyboard and mouse settings to defaults?
View 4 Replies
View Related
Jan 30, 2011
The sound stopped working on my Macbook Pro 1,1. It was working fine before, and I can't think of any changes I made that would make it stop working. I know it's not a hardware problem because the Apple sound plays when I turn on the computer. Everything is unmuted in ALSA Mixer. None of the hardware options in Sound Preferences produce sound. Plugging in headphones or speakers does not solve the problem. I'm using 10.10.One curiosity: Whenever I do something that would normally cause sound to play, the optical audio red light in the headphone jack turns on, but no sound plays.
View 2 Replies
View Related
Mar 24, 2010
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
View 9 Replies
View Related
May 30, 2010
The Bluetooth detects my mouse, but it asks for a "pin" before I can use it. What the heck? I never had to put a pin in to use the mouse on the Mac OS X side. If I can't use my magic mouse, I can't use Kubuntu! I don't have any usb mice around.
View 2 Replies
View Related
Jun 17, 2009
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies
View Related
Jan 26, 2010
wondering if any other ppc users have had the issue whereby, after the first unsuccessful power down (or sometimes the second or third) of a fresh ubuntu 9.10 install, mouse button 3, which is normally mapped to F12, becomes function (fn) + F12.? This is really annoying as you now have to use two hands to activate the little drop down menu. So i tried remapping mouse button three to that strange little key beside the left arrow on an ibook keyboard that looks like a picnic table and which, under os x, renames stuff.
I ran "gksu gedit /etc/sysctl.d/10-arch-specific.conf" and edited it accordingly: mouse button 3 from keycode 88 to 104. It works, but i still have to press function to activate it and fn + F12 still works simultaneously (though it is no longer defined in the conf file), and my new key doesnt offer the same functionality (eg, it doesnt give spell check options in firefox where fn + F12 does). Arg. Anybody know how to make it so that i can activate mouse button three without having to press function?
View 9 Replies
View Related
Jun 21, 2010
Anyway, just installed 10.04 desktop on a 4,1 Macbook. I've pretty much got everything to where I like it. My only real problem is the track pad/mouse not working right. Unless I move the the mouse perfectly vertical/horizontal the mouse starts zigzagging like crazy. The slower I move the mouse the more prominent the problem seems to be. I've tried playing with the mouse settings under preferences but nothing got it working smoothly.
View 1 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Nov 1, 2010
I've seen many (unanswered) threads about this, so I'm asking again, specifically relating to Maverick on a MacBook 5,1 (and probably others) regarding the following:
Touchpad sensitivity Horizontal tracking across multiple displays is 2-3x faster than vertical tracking. Note that vertical tracking stays the same regardless of multi-monitor orientation; horizontal tracking seems to be the only thing affected by multi-monitor placement. This problem does not exist in single-monitor mode--x and y tracking is 1:1. There are no GUIs, xinput or other parameters I can find to adjust the x tracking resolution in multi-monitor mode, unless I'm just missing something. At this point I've tweaked every available parameter in xinput to see what they did, and none of them affected only the x resolution the way I would like.
Magic Mouse scrolling I have found several unanswered threads about this problem. Magic Mouse scrolling is terrible, and can't be adjusted using any of the GUIs available, nor by xinput. The ONLY existing solution is exclusive to Firefox. As above, I tried every xinput parameter for the driver available and could not get the scroll tracking to adjust at all. It's still static, at roughly 3-5 "lines" per tick, and the tick resolution is too great (my finger slides nearly the entire length of the mouse for only three or four ticks).
I am willing to look at source and compile new drivers if someone can point me in the right direction. Google is useless here, as the top 100 or so results all refer to the same handful of threads here on this forum, all of which remain unanswered to this day. If anybody out there has any new information regarding these problems, I'd love to hear about it, even if it's tucked away in some obscure blog nobody reads (which is why it wouldn't show up in the first dozen pages of Google results).
View 2 Replies
View Related
Nov 3, 2010
This HOWTO was based on a fresh install of Ubuntu 10.10 on Lenovo T61.
The Bluetooh GUI detected the mouse but nothing happened so I Removed the Mouse from Bluetooth Preference.
Open up Terminal:
Code:
Copy your mouse address and enter the following:
The following tweak is optional to make the mouse scroll a little better on firefox, enter about:config in the url, search for the following:
Code:
View 7 Replies
View Related
Jun 17, 2011
I just installed ubuntu 11.04 on my macbook 2,1 and noticed that the trackpad was having many issues with detecting my finger, it works fine in OSX. I found this post, but cant find the xorg.config file and read that it no longer exists in ubuntu 11.04 (and yes, I know that that page is for 10.10, but it should still work). Is there anywhere that I could put in that code to make the trackpad more responsive?Is there any way I can make a two finger tap register as a right mouse click?
View 4 Replies
View Related
Feb 24, 2010
I would like to use the command key to enable center mouse click by hitting the sequence 'command key, button1'
View 6 Replies
View Related
Jan 14, 2010
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies
View Related
May 14, 2010
resubscribed to Rapidshare and in the past could easily download my friend's discussion papers using the file manager called DTA that integrates into Firefox. I have taken out a new subscription to RS and instead of getting the files I am receiving small html referer files. In theory this should be corrected by ticking a direct download setting on RS, but it is making no difference. I can manually download the files so I am certain the files are on RS in full form. I am also successfully auto logging into RS and this means the name and password are being handed over correctly
View 1 Replies
View Related
Mar 29, 2010
After I installed Windows XP on my leftover partition, I decided to reinstall grub2.
Now when I reboot grub throws me in the grub shell, if I then type configfile /grub/grub.cfg it starts grub like its supposed to. Tho I cant seem to be able to go straight to the grub menu and no to the shell.
View 1 Replies
View Related
Apr 20, 2010
Have just started to use look at crontab. I could use Scheduled Tasks as well as crontab -e in terminal.
I must have changed something because now Scheduled Tasks just seems to load then dropout. Loading a task through terminal is accepten (crontab -e) but doesn't work.
View 1 Replies
View Related
