my macbook(2008-2009) isnt booting ubuntu 10.10(on a usb drive) corectly. im just getting a black screen, where i can type in commands. now i found the scripts online, but how can i edit efi files either on mac or windows?
View 1 RepliesI have a remote server running Ubuntu, but the only computer that I have physical access to runs windows xp. Is there any way to edit the files remotely? Right now, I'm using ssh and then nano to edit the files, but I'd rather use a windows text editor (notepad++). I know I can use pscp to copy files, but every time I make a change to the file, I have to uploaded again to see the results (very tedious).
PS- the win xp computers im using are at my college. You CAN install software on them, but there's a firewall to the outside internet blocking SOME ports... SSH, port 80, port 8080 work fine right now. I can get admin access to the windows computer, and I have root control over the ubuntu one. Also, I can only use whatever computer is open... so I'd prefer to use a program that can be installed on a USB stick.
I just installed Ubuntu server 9.04 and am try to get it all set up but Ive run into a snag with Samba. I cant delete, add, or change files from my windows machine like I could before. Here is my minimalist Samba config that I used on my old ubuntu server:
Quote:
[global]
server string = %h server (Samba, Ubuntu)
security = SHARE
map to guest = Bad User
obey pam restrictions = Yes
[Code]....
Im sure its just one small thing Im forgetting..Its been a while since I played around with my server!
What's the fastest and most reliable way of working on files on a remote linux machine with emacs on a windows host machine? I need to be able to easily copy and paste text between emacs frames and use all the keyboard shortcuts, so putty and cygwin are out of the question. I've tried tramp mode but it just hangs when I try to connect.
View 3 Replies View Relatedmy issue is that i want to boot from windows boot loader neither than booting form grub loader...
I have installated windows and then installated red hat...I am able to login to windows and red hat without any issue but my prob is to load red hat and windows from windows boot loader...
Can u guys tell me where to edit and configure the files.
I can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
View 3 Replies View Relatedso I found this applescript somewhere, and not knowing applescript I was wondering if someone could tell me what the edits I need to make to duplicate the functionality found in the perl script which follows the applescript. (ie. I want to cycle through the colors in the same sequence)
Applescript (written by someone else for OS X)
Code:
tell application "System Events"
set theDesktopPlist to property list file "~/Library/Preferences/com.apple.desktop.plist"
set theGivenDesktop to property list item "desktopCode" of property list item "Background" of theDesktopPlist
try
set theColorArray to property list item "BackgroundColor" of theGivenDesktop
on error
[Code]...
Installed Ubuntu last night on a friends computer. I never work with pdf.files. Is there anything he can use to edit them on Ubuntu. I had to laugh thou when I returned home from work he was playing with Ubuntu, and downloading .exe files, and was frustrated why they were not installing.
View 4 Replies View RelatedI have lots of files I need to put in my /var/www/ folder (Apache http server). I thought I understood how to edit it:For single files: sudo cp file /var/www/For opening files: sudo gedit /var/www/fileBut I can't use the above for a thousand files, and I really can't afford the learning curve of BASH scripting at this time. So if there a way I can do this the GUI way (drag and drop and all that) without having to add myself in the group permissions for the /var/www/ folder?
View 7 Replies View RelatedGot my T2i a few days ago. Shot a bunch of short MOV files. Trying to do simple edits like trimming the beginning and ends. Nothing else.
Cinelerra 4 - no sound
Kdenlive - aside from crashing all the time, renders with unacceptable artifacts.
Lives - spends a long time making proxies then crashes
Avidemux - crashes on save/render
Kino - plays back first frame then last frame. Kinda funny but not.
Open Movie Editor - Does nothing at all
Open Shot - Can't find any libs
PiTiVi - Tools? We don't need no stinkin' editing tools.
Will Lunmeria be released before I die?
Will Lightworks be released before I die?
Is it time to retrench back into Windows 7 where there are numerous editors that actually work? Sure, costs money but the free stuff just dont work.
BTW, VLC plays the files back beautifully -- no skips, no jerks, sound completely in tact.
I haven't put this in the forums for any of the separate programs, because im having the same problem in all of them, im thinking maybe its a problem elsewhere?I recently got a Canon DSLR. It can save in Raw format, I use this function. Canons Raw format is "Whatever.CR2"F spot viewer and all editor programs see then and 'preview' them with no problem. The images appear to have no problem until you load them into GIMP (with UFRAW) UFRAW standalone, RAWStudio etc.
They load, but only as a small vertical rectangle. Often very purple in colour.I thought maybe it was something wrong with just the way it looked, so I just loaded one, went save as (a jpeg) and then loaded it up, it loaded as a small picture of the same purple-haze bar.Have I done something wrong? I googled it, downloaded UFRaw, even Ubuntu studio, same problem before and after studio installation. All these programs claim to read raw images.Just as an example, In RawStudio:I load up the folder of raw images. I can see all the images clearly with no problems in the preview slider up top. I can scroll through them and see them all no problem. When I click on one, it loads in the editing box as some weird bar (always vertical in orientation) often faintly resembling part of the photo but with seriously acid trip colours. Eg massive purple hazes, green everything etc.
sometimes i edit files in a remote server. i normally mount the remote drive via sshfs and edit a configuration file or two and some text files using gedit. after i upgraded to 10.04 i cannot save the files that i edit anymore. i can rename the file. but the weird thing is that i cannot save the file after i edit it. one of the files that i was editing is crontab.
View 4 Replies View RelatedHaving just spent many hours going through my entire photo collection tagging, rotating and editing (red eye, cleaning up etc), I am now sat with the window open deciding whether or not it's safe to close it.
I cannot find a save or apply button so I'm not sure if these changes are only made in F-spot itself or if I have to do anything else to make sure it saves to the files.
I DID check the option about storing data in the files where possible but I don't want to just assume it and have to do all this again.
on ubuntu server 10.10, how do you install/ use vim to edit files like setting a static ip address or folder permissions.
View 3 Replies View Relatedi was wondering if there is someway on my ubuntu server to create and edit .php files? Sorry if it is a nooby question.
View 9 Replies View RelatedI installed apache, php in my fedora 14.
phpinfo() works fine. But the following file 'a.php':
PHP Code:
<?php
if ( !file_put_contents( '/var/www/html/a.txt', 'aaa' ) ) {
echo 'Failed!';
# phpinfo();
} else {
echo 'Succeeded.';
[Code]....
I just did a fresh install of Lucid Lynx 10.4, but now whenever I boot up, at the boot loader, Windows 7 is no longer on the list. I want to now how to properly edit grub.cfg in /boot/grub so that I can boot into Windows 7 from the boot loader. The Windows partition is found in /dev/sda2. The folder name is 2EB2621EB261EB33. If anyone could tell me how write the entry in grub.cfg for Windows 7 to boot that would be awesome!
View 9 Replies View RelatedI have a dual boot system. a 200gb hd with ubuntu 10.10 and windows pro on 100gb hd. the problem im having is the 'black screen' error.
When i boot ubuntu, it boot fine but it shuts off my screen cause its not supporting my video hardware which is a geforce 6100 or something.
I know the fix is to change grub to support older video architecture. Something like changing line 'GRUB_CMDLINE_LINUX_DEFAULT="QUEIT SPLASH NORNODESET"'
But how do i change the grub when the screens off? i can't, right. Is there a way i can change the boot parameters of ubuntu from my windows boot or maybe from the ubuntu virtual desktop?
I used dvgrab to pull the video off of my Cannon HV30 HDV camcorder. Now I have a bunch of 5 minute clips at about a gig each. I need to edit these together and use a better file type. What should I convert to, and what program should I use for encoding and editing?
View 1 Replies View RelatedUbuntu is installed on my external. Can I add/edit/manage files on the internal drive that Windows is on without messing anything up (provided I don't mess with system files)?
View 6 Replies View RelatedIs it possible to view and edit db3 files in linux? OpenOffice does not do it and dbview says it can't read version 83. Just wondering. I am not really firm with databases, but i remember that i did view databases in linux.
View 3 Replies View RelatedI have some pdf files on a usb stick which I want to edit, Evince cannot do this, and if I try to open in Libre there is no option to import pdf there either. Is there an app. or plugin for libre to allow this
View 9 Replies View RelatedI use a linux machine at work and a mac at home. I can ssh from my machine at home to my work machine. But the only editor that I have access to on the command line then is vi, which I don't like.
Is there a way to use gedit on my mac to edit files remotely over an ssh connection?
This page says that it can be done, but I think that it assumes that you are using gedit on ubuntu. On my mac (os 10.5.8) I don't have the "bookmark" option when I click "connect to server".
[URL]
I have a directory with hundreds of html files.
For all the files I have to:
- delete all the row from the beginning of the file to the sentence "<img src="immagini/_navDxBottom.gif" />".
- delete all the rows from the sentence "<br clear="right" />" to the end of the file.
How can I do that?
a friend of mines laptop died a few weeks ago and i said i would extract data off the drive for her... did this with dd and created a .image file. I have this image mounted so it is browseable, and we can copy files from it however i am unable to delete files from it?
You'd think it was not a big deal... but i'm running out of space!! and the .image is 90 odd gb. I know i "could" just get the disk and copy the files off she wants... but that would be too easy
I was attempting to set up my ubuntu 10.04 system to load Synergy before log in to eliminate the second keyboard and mouse on my desk using these instuctions. However, once I log in I get a quick terminal screen which flashes so quick I can't read it then I am put back to the log in screen. I'm pretty sure I just need to remove the syntax I added to the /etc/gdm/Init/Default file and the /etc/kde3/kdm/Xsetup file and redo it (with less beer). The problem is that user account was the only user account I'd ever bothered setting up on this system and I can't get logged in.
Is there another account built in that I could use or do I need to hook the HD up to a SATA - USB cable and edit the files from another machine?
It's been weeks since I've logged into Windows but to test a eth0 card issue I now want to see if it works in Win7 and lo and behold, I can't for the life of me remember my Windoze password.I see lots of references to using specially created iso files to gain access to edit the registry, but I am wondering if anyone knows the commands I would need (from the command prompt of my F13 install dvd, rescue mode) to access the registry and what section I would need to change.I am guessing that I can do this from the command line without needing to download a special iso that (for all I know) could have any number of malware on it.I know this is not exactly the place to ask for a Windows registry edit walkthrough, but I figure some of you out there might have done this yourselves.
View 10 Replies View RelatedI need to change a game's screen resolution in a couple of .con files, but when I double click on them all I get is success in a little pop up window. Can I move them to my computer, edit them with a text editor, and reinsert them with read only privileges?
View 2 Replies View RelatedI have rented a remote dedicated fedora 7 system. The service provider provisioned the system and does not allow direct "root" access to the system.
I currently use putty to login into "user1", switch to "root" using su -, and then edit the file.
I would like to edit the "root" file directly from my home XP system which has a SFTP connection to the remote fedora 7 system (using Aptana RadRails).
I am not sure how to do that. I had 2 ideas but I am just guessing and afraid to proceed with so little knowledge.
I considered editing /etc/group and changing the line
from
root:x:0:root
to
[Code]...
So is there anything out there that will edit the HD 3gp files from my cell phone? Or the HD files from my Nikon camera?
View 5 Replies View Related