I'm getting one of those an 11" MacBook Air with 128gb SSD. 64gb might be too little for dual booting. Of course, I'll run Ubuntu on it. I'm choosing this hardware, because of the great form factor, aesthetics, trackpad, and ability to run OS X (as a UX designer, I want to do competitive analysis of the OS).It will be my first Mac. Any advice? Got tips on what I should start learning, getting used to, etc?
View 3 RepliesI'm trying to install Kunbuntu 10.0.4 on a late 2009 27" Core i7 iMac. Unfortunately the screen is always black while the CD/DVD installer seems to work. All firmware updates neede to the machine have been applied and it is non affected by the known problems of the late 2009 27" iMacs.
View 1 Replies View RelatedWhat i think is that maybe it is possible, but however some of the hardware features may not be supported by Fedora unless the Kernel can be patched such as back-light, iSight etc etc.
View 1 Replies View RelatedI have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
I was searching for a long time for a Linux Live USB that I can boot my MacBook Pro from. Is there such a distro I can install on Snow Leopard or Windows 7? Update: I've found this:
"isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...)Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and,I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this and had used open standards instead
I've been attempting to boot Ubuntu on my Mac Mini with absolutely no success. I tried 32-bit and 64-bit versions of 10.10 and 10.04. In all cases, I see the little keyboard and man at the bottom of the screen and then the screen goes black (i.e. my monitor stops receiving input).
My monitor is connect via the HDMI-to-DVI convertor, so is this a driver issue related to that?
I bought an iMac 27" 2010. Now I installed Maverick but neither the iSight microphone nor the one you plug into the jack works. How can I do?
View 1 Replies View RelatedI just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies View RelatedUbuntu was good but i really wanted Mandriva. I have made a working dvd. I know it works because it will install correctly on a virtual machine on parallels desktop.
My problem is, i run the Mandriva dvd, it works and shows me the four options, "boot from hard disc, install ect" i choose install, and then it comes up with "No CDROM device found" i say ok, then it says "which driva should i try to gain MEDIA access?"
The highest I see is kernel_task at 362 mb.
I was running Cafe World with the latest Google Chrome and I doubt that Cafe World would use 7 gigabytes of ram.
I've got a Macbook Air and a verified 9.10 liveCD in the external superdrive. I can successfully boot to the CD, but when I choose "try ubuntu without installing", all I get is a blinking cursor in the upper-left of the screen forever. Any idea why it won't start? CD works fine on my Dell, that's why I say it's verified.
View 7 Replies View RelatedIs there any way to switch to the nVidia 9400 controller in Ubuntu 9.04 on Macbook 5,1?
When i run lspci i can't see the 9400 controller code...
Today i went ahead and installed ubuntu on my windows desktop pc. I tryed the live cd and tested it out and everything was fine i then installed it using wubi. I then wanted to install it to my macbook ( bought in june 2009 ) and i booted the live cd and chose try ubuntu without any change to your computer. It booted a black screen with a white _ at the top then the screen went white and did nothing. I tryed it several times and nothing happend. I then said ok il maybe just try install it through wubi on my bootcamp partition and it all went fine until i got to the windows bootloader and chose ubuntu, it camp up finishing linux installation and where its meant to change and show the ubuntu symbol after ( i know because i've installed ubuntu on the pc) the screen went white. Nothing.
View 9 Replies View RelatedI have a first generation Macbook that shipped with Tiger. I don't often use the os x partition anymore, as I installed Windows XP on a 15 gig partition back when bootcamp was still in beta and I normally use that when I'm on my laptop. Since Tiger is rather old and the only reason I would want to upgrade to leopard is to have access to bootcamp again (they disabled access to the bootcamp application in os x, but I can still boot into windows), I have been thinking about wiping out my os x installation and using ubuntu instead. Does anyone have any thoughts on the pros and cons of totally removing os x?
The main reason I hesitate to just jump in and do it is because if I decide to install os x again I won't be able to install bootcamp again, unless I buy leopard. If I wipe out os x and install ubuntu, will I still be able to access windows in the same way? Windows uses bootcamp drivers to run properly, so I have never quite been sure if it is pulling something off of the os x partition or if it is totally standalone.
I have a macbook5,1 with ubuntu 9.10 on it. Does anyone got wake-on-lan working on this type of machine (or any other intel macbook?)
At startup, ethool sets the wake on lan parameter. I tried sending the magic packet with the wakeonlan utility.
I have just installed the latest Ubuntu 10.4 LTS on my Macbook Pro and the one thing I cannot get to work no matter how much i try the fixes and suggestions they do not work. I have the volume controls, even the ones on the keyboard work but there is just no audio what so ever.
View 1 Replies View RelatedI would like to know, how could I install ubuntu on Mac. I've gone through the following guide, but there is no option for my machine MacBook Pro 6.2.
Code:
[URL].. BTW, i would like to have dual-boot option with Mac OSX pre-installed.
I get through the install just fine till the end Iv tryed twice. When i get to the "Who Am I" screen i fill out all the info the "Forward" Button doesn't light up, it keeps on installing till "Ready when you are" and then i'm kinda stuck.. I can go back to past screens and edit the info and stuff but thats it can't move on.
View 4 Replies View RelatedWhen I installed I noticed no sound was emanating from my computer and a red light coming out the headphone jack. s there any reason why there wouldn't be any working sound? Everything else seems to be working fine. I installed the additional drivers but the only ones listed were graphics and wireless.
View 3 Replies View RelatedIntroduction: I wrote a very extensive and quantified tutorial and informational guide aiming to upgrade the latent information from the wiki's on MacBook Pro 5,2. An accidental toe tap ended with me bumping my head and pressing the X button on firefox. What happen had to be 1 out of a billionth of a chance. So this version will be simple and to the point, until I can muster enough patience to detail it all out again. Please correct any errors.
sudo apt-get install pommed - To get backlight keyboard working.
sudo apt-get install cheese - To get iSight working.
sudo apt-get install lirc - to get remote working (tested in XBMC)
sudo apt-get install bluemon - Pairs Mighty Mouse and Wireless Keyboard (optional)
[Code]...
I have installed it on my Macbook Pro 5.5 via rEFIt+ and the install works well except for the lack of sound. I've seen this issue posted about on the forums and I've followed the advice posted here as best I can with my limited knowledge. Terminal didn't recognise the aptitude (command not found). I guess that may be due to an older build of Ubuntu being used in the example?
View 5 Replies View RelatedI have downloaded the 64 bit iso and burned the CD-ROM per the instructions. The CD is verified. When I boot the mac, holding down the C key, I get a menu of options relating to Ubuntu. If I choose the trial run from CD then the CD drive starts up but the screen goes blank and I end up with just a blinking underline cursor in the upper left hand corner of the screen. Does anyone known if one can, and if so how, to boot the live CD on a Macbook Pro 5,2?
View 6 Replies View RelatedThe wiki says there is a way to install from usb but I can't get it to work on my Macbook Air 3,2 (the Nov 2010 revision, not the one from last week).
My goal is to dual-boot OS X and Ubuntu, but I can't get the Ubuntu installer to boot. I've tried a lot of variations on the instructions I've found, so I get the feeling I'm probably missing something fundamental.
I installed refit and used BootCamp to partition the drive. I downloaded desktop/alternate and i386/amd64 isos. I tried to follow the instructions to use unetbootin on OS X to install the ISOs to my USB drive, but neither drive that I connect appears in the "Drive:" selector when on OS X. I used usb-creator-gtk and unetbootin on an Unbuntu machine to try each of the four ISOs.
When I try to boot the Air from the USB drive, I got a few different types of failure:
gpt, single fat partition, unetbootin -> alternate amd64
result: "Non-system disk" "Press any key to reboot"
mbr, single fat, unetbootin -> alternate amd64
result: black screen, fan runs at 100% after a minute or two
[Code].....
I tried dd'ing a disk image to my new partition as described here and here with the desktop amd64 and i386 images, got a few different errors - once syslinux complaining "Error: No configuration file found" when the drive I dd'd from wasn't properly unmounted before bringing it to the Air, once I chose the drive in refit, refit displayed the single logo, and it never booted, and once I got an error I didn't copy down about needing a boot floppy.
Has anyone successfully booted Ubuntu from USB key on the Air? Exactly how did you prepare which image?
I've been trying to install 11.04 on my MacBook Pro for the past couple weeks, and I'm getting pretty frustrated with it. When I try to boot from a DVD, I either get a blank screen with just a flashing cursor, or it will ask me if I want to try, install, or verify the disc, after which I will get a bunch of different-colored blocks all around the screen.
I have installed past versions of Ubuntu on this computer with no problems, so I'm pretty stumped now on why I'm having this problem. Also, I've tried the Ubuntu Wiki and sticky thread on this forum, but nothing in either seems to help. Additionally, I have installed Mac OS X 10.7 Lion. I don't think it'd effect anything, but I thought it was worth mentioning.
I recently bought a macbook pro 5,5 (unibody) and I'm running both OSX and Ubuntu 9.10. I love the laptop, but I've been having some issues with the touchpad in karmic.
In OSX, I can keep my thumb on the bottom of the touchpad as if it were a button and operate the rest of the touchpad as normal. With my thumb on the bottom of the pad, I can still click and drag and use two finger scrolling.
In ubuntu, I've used the instructions from[url]
If I have a thumb on the touchpad, it always assumes I'm two-finger scrolling. I've tried synclient BottomEdge=600, but it doesn't make any difference.
I'd like to find a way to control the fan's activation threshold in ubuntu (i use SMCFanControl in OS X.
View 4 Replies View RelatedI have a Macbook Pro with a b0rked DVD drive, and want to install Ubuntu on it.
I have followed the instructions here: [URL]
But when rebooting and holding ALT, I don't get the option of booting from USB.
Possibly related, when I view the USB drive in Disk Utility it's marked as "Bootable: no" :
I've tried this with two different USB sticks.
I've also burned a Ubuntu install disk from the original ISO, loaded it into another mac and started that mac in Target Disk Mode. Then I connected them with Firewire, rebooted the mac *without* the disc drive, held ALT and chose the shared disc as the boot device. Though weirdly it was named "Windows". Sadly, I then got a message on a black background saying it was not a bootable device.
As described here (https://help.ubuntu.com/community/MacBookAir2-1/Karmic) I've got Ubuntu 9.10 running on my Macbook Air 2,1 but the only things that don't work are the speaker and the built-in microphone. I can get sound using the line out though. I am mainly looking for a way to get my microphone working (I can live with sound only via line-out).
View 6 Replies View RelatedI have created a partition through Boot Camp, downloaded the 64 bit Intel installer for PC and Mac, verified the checksum, burned a CD from its image (on the second try), but when I try to boot up from that CD, rEFIt refuses because of a "legacy" problem. I assumed it would be a live CD, from which I could do the installation; am I wrong, is there another way to install from it? My MacBook Pro 5,3 is the one exception to having its own installation page.
View 6 Replies View RelatedFirst macbook. I've managed to get everything I really need running except sound. I'm 5-year ubuntu user so if anyone asks for any system info I'll probably be able to manage it. This is the only sound-related entry I could find in lspci.
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)