Ubuntu :: Access To Exchange Public Calender?
Jan 26, 2011
I have an Ubuntu 10.10 in my work environment and have issues handling the Exchange 2007 server's public calender.My outgoing server is SMTP | Incoming server is POP3 (my office have disabled IMAP and run MAPI). First I tried evolution but it said ""The server is running Exchange 5.5, evolution-exchange connector supports 2000 and 2003 Server" Installed thunderbird and i am happy with it. The only thing which i would like to do is access my exchange public calender and firefox will not be able to do it in OWA.
View 4 Replies
ADVERTISEMENT
Aug 2, 2011
I'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies
View Related
Feb 17, 2010
We have setup a Exchange server at remote location and while testing I am facing following issue:
1. While configuring Outlook, it's not able to reach the exchange server which hosted at third party and is reachable from everywhere except my Local Network.
My Local network is as following:
Local Lan On Private subnet - Gate+Firewall(Iptables) with two interfaces(private and pubic)with natting-Internet Connectivity.
Where as Exchange server is setup at a Data Center and accessible from internet.
I need to know that what all rules are required for user's to configure outlook with Exchange 2010.
Rest of the things are working fine (Internet connectivity, Exchange OWA access).
View 4 Replies
View Related
Feb 24, 2010
I am thinking of installing a Linux mail server and use it for my company. We are about 3 people that using emails and i do not want do spend a significant amount to get an exchange server. However, i need a mail server that i will be able to get the functionality that exchange server provides such as emails (to my mobile, web access, and using outlook client), calendar, tasks and contacts. Can you reccomend me which Linux mail server should i use for all the above functionality?
View 6 Replies
View Related
Apr 14, 2010
I have setrup Ubuntu Enterprise Cloud on a single machine.
1) I am able to run the instances from store (karmic) On running the instance two ips are assigned (public and private) as 10.B.C.X and 172.19.1.2
2) I am able to connect to the instance (10.B.C.X) through ssh (using key)
3) However I am unable to access the instance outside the UEC (using public ip). When I try pinging, I get an error Request timed out or sometimes Destination host unreachable.
4) I have provided the following access using euca-authorize
Details below:
1) Hardware : Blade (64 bit)
2) Version : Ubuntu 9.10; Eucalyptus the one using apt-get install eucalyptus
3) Topology : Single physical system
4) Mode : Managed no-vlan
[Code]...
View 1 Replies
View Related
Aug 3, 2011
Today I was creating an Ad Hoc network for sharing internet connection and I realized it is not working. I have done it before on Ubuntu 10.10, now on 11.04 it just doesn't work. I create a new connection (Create New Wireless Network) and it is never visible to the other computers (I checked the IPv4 settings, it was Shared to Other Computers). I really do not know what is going on, my wireless card is working perfectly fine (I can connect to other network and on additional driver it is there with a green circle).
View 9 Replies
View Related
Oct 13, 2010
How I can benefit from a public external IP? Do I need a public IP to access my computer from a remote site?run a tftp server ?
View 1 Replies
View Related
Jan 22, 2011
does somebody know how dnsmasq / iptables need to be configured such that requests to my public IP from lan are correctly NAT'ed to the host that handles them? Currently my routing device treats them like "oh, these are anyway for me, gnam gnam" which actually doesn't work.Unfortunatly setting up NAT rules that redirect requests from my lan correctly as they are redirected from wan is an option I would like to use only if there is no other possibility.I would like some kind of solution that treats packets that are sent to my public IP as normal packets that are not looped back before they even get out. So they would need to be at least sent to the wan gateway where they are directed back where my firewall can successfully treat them like all other public requests.
View 1 Replies
View Related
Feb 4, 2010
Is it possible to provide remote Windows users access to a LAN via the Internet when the LAN itself is connected to the Internet via a SOHO router that is assigned an IP address dynamically? An LQ thread from 2004 includes a suggestion to use VPN and DynDNS.com. Is that still a good solution? Are there any security issues?
Assuming:VPN is a good choice. DynDNS.com or similar can be used to give remote clients the public IP address of the SOHO router. the SOHO router is configured to forward VPN traffic to a Linux system acting as the VPN gateway. then, for a LAN of ~20 IP nodes and less than 5 simultaneous remote clients, are there any other VPN server software solutions to consider other than OpenVPN, Openswan and strongswan?
View 2 Replies
View Related
Jan 20, 2011
I recently installed Ubuntu 10.10 on my sister's HPtx2000 since she isn't going to use it anymore and it worked better than I expect. The touchscreen works without any additional driver tweaking and installation <3, the wireless works fine, the sound works. I listed those because when i was installing, I was looking around at other people that did this and those were the problems they had (but those was of an old OS).
Well anyways, what I want to ask is about the stuff that doesn't work and the stuff I want to do: The buttons that flip the screen and etc doesn't work. Is there a way to map them and flip the orientation of the screen? And the other buttons too, like the media button. Is there a way to map them to open VLC or something? Does anyone know any tablet programs for Ubuntu? E.g a simple text program that can convert stuff written to neat, typed font? A way to write text into a google search bar using the stylus? And while we're on this, is there a way to map a left click on the touch screen?
In Windows, the left click could be mapped to: a). a side button of the pen, b) the top button of the pen, and c) holding the pen down onto the touchscreen. how to use Samba to access a public folder of a Windows computer? And to access the printer connect to the Windows computer? Some of the tutorials I found were only for folders and printers on the Ubuntu computer.
View 4 Replies
View Related
Aug 5, 2009
I have two nagging problems on one network which I do not have on another elsewhere, both using uptodate Debian servers. The server is on the private subnet behind a router/adsl modem. The symptoms of the one which does not work
1) Users cannot access their web site from lan. If they try, they get to the router web interface, same as if they entered http:10.0.0.138 which is the router's lan address.
2) Users cannot access smtp or pop3 service using the domain name, they can access it only using the servers LAN address.
I fear that I might have not set up the router properly because appart from that the two servers are almost identical but I do not know where I might have made an error.
View 14 Replies
View Related
Jan 6, 2011
Looking for a good calender app.
View 3 Replies
View Related
Dec 3, 2009
Since FC6, NFS became very finicky and seemingly causes servers to randomly denying mounts from some terminals but not others, with all exactly the same new FC installation and exactly the same hardware - crazy!. The only difference is hostnames of the terminals trying to mount NFS volumes on the server and I made sure that /etc/hosts on all terminals and servers contain each others ip addresses and hostnames. I always uninstall SELinux which is truly a huge pain in a corporate environment. Is there ANY way I can relax the NFS authentication on the server in order to make sure clients can mount volumes?
e.g. the following is encountered often, with sometimes crazy situations that clients can only mount nfs volum es from the server after I first boot the server and then ALL the terminals. It is painful as you might agree! Other way round, no go, client will not mount until server is booted and then client booted.
In this case I really prefer windows lackey security. It works. Never mind how crappy windows is, at least I don't have diabolical access problems on servers.. NFS used to be very nice about 6 years ago but truly sucks recently imo. /]# mount -o soft -t nfs nfsserver:/public /xfer mount.nfs: access denied by server while mounting nfsserver:/public
View 1 Replies
View Related
May 13, 2010
I could no handle/circumvent on the past week, despite of the several "googling" and documents reading. I will try to mention all needed bits... I'm managing a network with the following structure:
eth0: internal net
eth1: DMZ
eth2: 10 mbit/sec sync line with eight public /29 IP's + a /30 interconnection network. All public IP's must use the interconnection's network gateway.
eth3: ADSL with ppoe with fixed IP (ppp0).
Now, a few extra info:
- All internal traffic is routed through ppp0 except when it's destined for DMZ and public IP's range.
- DMZ traffic is routed either through ppp0 or eth2. This is done by source IP.
- eth2 has on IP from the interconnection network, and six public IP's are also defined on eth2. Command: "ip addr add ...."
[code].....
View 6 Replies
View Related
Oct 28, 2010
host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
View 1 Replies
View Related
May 20, 2010
I would like the calender to boot come on the screen with only the month ctrl 3 and the contact/control panel on the left.
I do not want the Event or Task areas to show. I don't use them that much and there are buttons to call them if I do need to make notes.
I only want the numbered squares and buttons/icons to be displayed.
I've dug here:
/home/dave/.gconf/apps/evolution/calendar/display/%gconf.xml
.evolution/calendar/local/system/calendar.ics
/home/dave/.gconf/apps/evolution/calendar/%gconf.xml
I would like this to be a permanent feature when I call it from my task tray.
View 2 Replies
View Related
Nov 4, 2010
I'd like to know if this is common security flaw or normal to open up FTP to the public which is of course protected with password for 3rd party access to maintain our public facing / production website ? If yes, what sort of FTP application to install in your Linux webserver?
View 7 Replies
View Related
Apr 19, 2011
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
View 2 Replies
View Related
Mar 15, 2011
I found the calender missing in the top right corner panel.
View 2 Replies
View Related
Apr 14, 2011
Does anyone have a suggestion for a *simple* calender alarm application? Something that will pop up when I open up the system and tell me "Take out the trash today!" (Actually, it needs to say; 'TAKE OUT THE TRASH TODAY, DUMMY!') I've looked at *Evolution* but it is too much application for what I need. My system is Ubuntu 10.04 OS with 3gb of RAM.
View 5 Replies
View Related
Jun 27, 2011
I use Ubuntu 10.10.I wanted to change the background of the gnome panel time and calender applet.I searched about this but only found out dated guides on changing the font in the calender which didnt work.
View 4 Replies
View Related
Sep 24, 2010
I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
View 2 Replies
View Related
Feb 15, 2010
I just installed openSuse 11.2 with kde4 and want to import my data into korganizer. I saved my tasks and dates from kde3 as a vcs file.
Unfortunately the new version of korganizer does not show any entries in this file. I thought vcs is a valid import/export format.
Is there a way how I can import my data into korganizer?
View 5 Replies
View Related
Mar 3, 2010
How can I forward all traffic from a public IP to another public IP. Let's say I have a first debian box named box1 with eth0 = 1.1.1.1 and eth0:1 = 1.1.1.2 and I want to forward all traffic from 1.1.1.2 to "box2" located somewhere else over the internet and having for eth0 2.2.2.2 Both 1.1.1.0/24 and 3.3.3.0/24 are public IP ranges.
View 1 Replies
View Related
Aug 27, 2010
Anyone know of any linux programs to run a mayan calender?
View 1 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Nov 16, 2010
Code:
#include <iostream>
using namespace std;
[code]...
View 1 Replies
View Related
Apr 20, 2011
ls -al ../public-back
drwxrwxr-x 4 apache apache 4096 Apr 19 03:32 templates
ls -al ../public-back/templates
drwxrwxr-x 2 apache apache 4096 Apr 19 03:33 content
[code]....
How do I move the contents of /public-back/templates recursively with permissions into /public/templates ?
View 2 Replies
View Related
Jul 13, 2009
Can any outsider(from Public N/w) access my pvt. network.i.e. my clients of my subnet? If yes how ??and if no why?
View 1 Replies
View Related
Feb 2, 2011
I want to link windows server and ubuntu server, in vittual the ping is ok but I can't exchange anything.
View 1 Replies
View Related
