I'm using eclipse as my IDE on ububtu 9.10. I recently install the 64bit version on my new computer. For some reason, every now and then, the eclipse shuts-down. I'm talking about 2 minutes after running the application - Bang, it's out. Even when I installed the 32bit version I get the same problem. My intuitive thinking was that something was wrong with the computer, so I switched to a different one.
View 2 RepliesI'm using eclipse as my IDE on ububtu 9.10. I recently install the 64bit version on my new computer. For some reason, every now and then, the eclipse shuts-down. I'm talking about 2 minutes after running the application - Bang, it's out. Even when I installed the 32bit version I get the same problem.My intuitive thinking was that something was wrong with the computer, so I switched to a different one. Guess what - I get the problem.PS - don't know if this is important, but I have one plugin: Subversion from[URL]
View 3 Replies View RelatedRecently I installed Fedora 12 64bit in my HP Compaq 6720s. Among many other problems that I had and I solved with your help, I have the following problem:When I restart or shut-down Fedora 12 it crushes and hangs and only thing that I can do is to stop and restart my laptop by means of ON/OFF button.My question is:Is there any way to see this error (maybe some log file or something) so I can send this message or log file here in this forum and get some help?
View 1 Replies View RelatedI have become interested in learning to use Python and I wanted to use the Eclipse IDE. I wish to find the best way to install the Eclipse IDE and add the PyDev plugin. At the Eclipse.org site I have downloaded the eclipse-SDK-3.6.1-linux-gtk-x86_64.tar.gz is this the correct file I will need for my Fedora 12 (64bit) os? If yes, what is the command line I should use to do the install? I am also interested in any books/sites that might help me to get started.
View 3 Replies View RelatedI'm running Eclipse 3.5.2 on Slackware 13.1 (64bit) and Eclipse is crashing whenever a pop-up to assist with code (ie: displays a list of properties for an object to pick from) is displayed while editing. I've also tried upgrading my JRE & Eclipse to 1.6.21 & 3.6.1, respectively, with no change in result.
The resulting hs_err_*.log file begins with:
Quote:
#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0x00007fa00f531244, pid=17577, tid=140325409208080
#
# JRE version: 6.0_20-b02
[Code].....
Specifically what libraries do I need to install to support a 32-bit Eclipse-based IDE? the IDE is only available in 32-bit, so i tried installing glibc (32-bit version) but nothing happens. Here's the site were the IDE available is [URL].
View 1 Replies View RelatedMachine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
after finally managing to install perfect world international rising tide on my ubuntu 9.04 and after i fixed the cursor problem ,i finally managed to run the game however when i wanted to enter my account to actually play the game ,just after logging in the game crushes ,i really want to play the game ,plz help me.i ran it through wine in the console and i got this: fixme:ntdll:find_reg_tz_info Can't find matching timezone on a side note is there a way to get rid of the black flashing boxes on the screen.
View 1 Replies View RelatedI have been using Eclipse to program in Java for a long time, and have been using Jigloo for most of my GUI design. Recently I decided to try out the C/C++ plugin. I tried installing it, but it did not work. After many attempts, I finally gave up. However, after uninstalling it I found that Jigloo had stopped working. Any other plugins I try to install now also don't work. I have tried uninstalling and reinstalling plugins, and reinstalling eclipse, but nothing I have done fixes it. Although eclipse says that the software has been installed, nothing shows up in the features list or the plugins list.
Another problem: When I install eclipse from the repositories, it doesn't install a bunch of libraries and eclipse cannot recognize standard java files.
I recently had to reinstall Eclipse on ubuntu 10.10 and i did it twice, once just removing eclipse package, and the second time removing every package associated with an eclipse install.when i launch eclipse I go into my package view and select a package and then double click on a Java file.
View 5 Replies View RelatedI have been writing PHP using Adobe Dreamweaver; I have been looking around for an application that focus more in PHP.I have found:
[URL]
and:
[URL]
I know Zend stands behind PHP and that Eclipse is a popular open source IDE. What is the difference tho?Is the PDT Project only a functionality that could be added to Eclipse IDE? Is Zend for Eclipse a stand alone IDE for PHP? if so, Why the Eclipse in the name? I have downloaded Zend Studio for Eclipse, so far it seems very complete (no that have learned how to use all its features).
The Metrics plug-in supports Java development well at Eclipse.
[URL]
I would like to know if it supports Eclipse CDT, so I can use it with my C++ project. Any thought? If it doesn't support CDT, is there any good static code analysis tools available for Eclipse CDT?
I use Slackware64 13.1. I installed eclipse from slackbuild.But how can I install Eclipse CDT? is a plug-in for eclipse? It's another program?
View 4 Replies View RelatedI'm using mencoder to capture audio from a Encore ENLTV-FM3 video capture device. I have recently noticed that, since one week ago, when the machine was forcibly restarted due to a power outage, all recordings are slightly pitched, they play back slower than they should.
I narrowed down the problem to the following command line:
$ time mencoder -really-quiet -tv driver=v4l2:device=/dev/video1:chanlist=us-cable:audiorate=32000:alsa:adevice=hw.1:input=0:amode=1:normid=11 -endpos 00:10:00 -ovc copy -oac pcm -of rawaudio -o test-32000.wav tv://69
real 9m54.886s
user 0m5.536s
sys 0m1.740s
$ ls -l test-32000.wav
-rw-r--r--@ 1 martin martin 76800000 Mar 15 17:20 test-32000.wav
Somehow, mencode managed to gather precisely 10 minutes worth of raw audio in 9m 55s. That's not physically possible, unless the capture device's A/D converters are "overclocked". I can't think of any other explanation besides hardware failure. Can that be? Could it be that something got burnt during the power outage and now the capture device's internal clock went nuts?
Since the machine's restart, I've also noticed dmesg is flooded with entries like this:
CE: hpet increased min_delta_ns to XXX nsec
Which seem to indicate that the computer's high precision event timer is somehow out of sync. Does this have to do with the audio issue? Can it be that the audio converter's sample rate is linked to the HPET? I'm totally lost here. Has anyone bumped into something similar?
I am new to Fedora (I have always used ubuntu in the past), and I am trying to download eclipse. Unfortunately, "sudo yum install eclipse" is returning "no package eclipse available". I think this means that I am missing the correct repo, but I'm not sure which is the right one and don't know how to add it to my repo list for this version. My version of fedora is centos5 based, and my current repo list is the following:
[Code]...
I installed eclipse and tomcat with package manager. Eclipse and tomcat are running but i can't see tomcat in the eclipse. I just see 'Basic' folder. That is a screenshot [URL]
View 1 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
does anyone know where I can find libcrypto.so.6()(64bit) and libssl.so.6()(64bit) for Redhat 6 - based distributions?
View 6 Replies View RelatedEdit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing
Iam trying to install F15 64bit but I failed my hardware as folow
mb : asus m5a88m
cpu: amd phenom ii x6 1100t
ram: 8 gb 2x4gb Kingston 1333
hdd : wd 1tb sata3
wd 1tb sata2
vga: ati 4250 b/in
installation media: downloaded dvd image burned the image installed correctly inside vmware and work as expected but the media boot to the first screen quistion and when press ok for new installatin the answer is a serious of errors messages (a lot of it). did my hardware not compatible??
I did a full install on 5.4 64bit. the installation aborted with the following errors:
View 1 Replies View Related