Ubuntu :: 11.04 "bash: Sudo: No Such File Or Directory"?
Jul 9, 2011This is the same with git. I'm not sure if any other commands are like this, but I know that both of those commands are installed.
View 9 RepliesThis is the same with git. I'm not sure if any other commands are like this, but I know that both of those commands are installed.
View 9 RepliesI've run into a problem with my bash program.
Code:a mkdir -p /home/chris/Downloads/ARCHIVE/`date -I` find /home/chris/Downloads* -mtime +14 -exec "cp {} /home/chris/Downloads/ARCHIVE/`date -I` ;
It's meant to move old files from my Downloads folder into an archive file (later tar them). The directory exists, I've used $PWD and nautilus and ls to make sure it's there, yet for every file it gives
Code: find: `cp /home/chris/Download/foo.bar /home/chris/Downloads/ARCHIVE/2011-08-19': No such file or directory I tried to test it on a different destination, specifically my home folder. IT still gave me the error.IS it a bad syntax within find or something else? I'm running a 32-bit system with 11.04
In Ubuntu 9.10, sudo was working properly except it would not let me run speedy as sudo. I would get an error message, which I believe stated "No such file or directory. However, I could run the command as my regular user (being prompted it needed escalated privileges), and I could run the user as root. So I tried to "fix" it so that I could run it via the sudo command. My fix, in turn, ended up breaking sudo. I edited a file which contained the directories for PATH (I made a backup of said file), and that didn't work. It further broke sudo. So I attempted to restore the backup file, however, sudo was still just as broken.
Now, whenever I try to execute any command with sudo I get:
tim@linux-hp:~$ sudo -i
[sudo] password for tim:
env: -i: No such file or directory
tim@linux-hp:~$ sudo gedit
env: gedit: No such file or directory
tim@linux-hp:~$ sudo apt-get update
env: apt-get: No such file or directory
tim@linux-hp:~$ sudo nautilus
env: nautilus: No such file or directory
tim@linux-hp:~$ sudo update-manager
env: update-manager: No such file or directory
tim@linux-hp:~$ sudo speedy deploy
env: speedy: No such file or directory
I have since upgraded to Ubuntu 10.04 Alpha 3, with mild hopes that the upgrade would remedy my problem, but alas - it did not. How to get sudo back to a working condition?
I just set up apache on my PC and I cant change the permissions by right clicking because "I'm not the owner" and instead of using the chmod command on every file that I would like to edit I would just like to write a script on a text file, save it to my desktop so all I have to do is double click on it and boom I can edit all my files, etc.
View 2 Replies View RelatedI am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
I had netbeans installed and I removed it using wheris netbeans and then sudo rm whatever files it gave.I also remember doing sudo rm -r /usr/lib/netbeans6.9 I did this because i wanted to install netbeans via the repo. Now I installed netbeans suing
Code:
varun@varun:~$ sudo apt-get install netbeans
and when I try running netbeans i get...
Code:
varun@varun:~$ netbeans
/bin/bash: : No such file or directory
Have i changed permissions or something?
I upgraded my php from 5.1.6 to 5.2.10 but at php -v I got a weird error, so I figured let's reinstall some things. This was the probably very dumb commando I used:
yum remove gcc-c++l zlib zlib-devel php*
Now I think my whole server is fxxxed because I get the following messages:
-bash: /usr/bin/yum: No such file or directory
-bash: rpm: command not found
-bash: ls: command not found
And the only thing I'm glad about is I still have an SSH connection open because creating a new connection isn't possible either. what should I do to repair this all.
An executable fails to be found and run when called even though it is found and displayed by ls.I am on lucid LTS fully updated 32 bit.The file has permissions setup but any attempt to run it results in the error bash ./executablename No such file or directory
This situation also seems to be present in kcronsometimes my scripts dont run from it even thoughthe run now option does.This bug has been around since dapper it would be nice if someone could fix it.
I have booted up into Ubuntu 10.04 LTS disc live.
When I type 'chroot /media/(UUID)', I get:
chroot: cannot run command '/bin/bash': no such file or directory.
'/bin/bash' does exist.
Why is this error occurring?
I'm trying to change the root directory to /tmp/somedir using chroot, but even using sudo or su-ing to root I get the message:
Code:
cannot run command `/bin/bash': No such file or directory
I tried copying /bin/bash to /tmp/somedir/, but the same error occurs. What's wrong with my chroot?
i'm brand new to linux and honestly don't know how to use it very well and i am trying to install java, following the directions is not working i am stuck at Code: chmod a+x jre-6u<version>-linux-i586-rpm.bin it says bash: version: No such file or directory i downloaded the software to the downloads folder firefox uses as default.
View 6 Replies View RelatedAwhile back, PabloTwo pointed me to zenity as a way to create bash scripts with changeable parameters. That thread is here, for anyone interested in reading about it: [URL] Anyway, my problem is that I'm trying to capture input that contains double-dashes ("--") but zenity (or maybe or it's bash???) complains with the following error message:
"This option is not available. for all possible usages.
bash: [/code]: No such file or directory"
Here's an example of what I'm doing:
Code:
# Select the time of day
Flytime=`zenity --list --text="Select the Time" --radiolist --height=300 --width=300 --hide-column=2 --column="Select" --column="Code" --column="Time of Day"
"" "--timeofday=real" "Local Time"
[code]....
What I want to accomplish is for the variable $Flytime to contain either "--timeofday=real" or "--timeofday=dawn" (without the quotes) depending upon which radio button is selected. I have tried escaping "--timeofday" (e.g. "--timeofday" and even "--timeofday") but that's not working.
So I have created a Bash script with the intent of the program to change the names of the files in a folder's subdirectory.The code recognises the individual subdirectories, then is able to enter into one and list the files individually, but when it tries to change their information it says;' cannot stat ' : ' No such file or directory 'As if it is looking in the directory that contains the Bash script, not its subdirectory.It is essentially saying, I see a file here called FILE but sorry, I can't change FILE because FILE doesn't exist. kweh?Is this something outside the capabilities of Bash? Am I asking too much of it? Can Bash only manipulate files that are in the same folder as the script?
Code:
#!/bin/bash
echo enter directory
[code]....
Basically, I am trying to locate and copy the newest .json bookmark backup in my .mozilla/firefox/w987sdg9.default/bookmarkbackups directory.
I tried this
Code:
ls -t ~/.mozilla/firefox/b1ahb1ah.default/bookmarkbackups/ | head -1
which does return the newest file, but only the filename itself. I found readlink, but I haven't gotten that to output a full path which I can then feed to copy. So, it seems to me that find might work well here, and I know how to find based on absolute dates, but not relative.
How can I open the Firefox Profile Manager. I've googled and read but the directions don't work for me:
randymanme@randymanme-desktop:~$ /usr/lib/mozilla/firefox -ProfileManager
bash: /usr/lib/mozilla/firefox: No such file or directory
randymanme@randymanme-desktop:~$ /home/randymanme/mozilla/firefox -ProfileManager
[code]....
I understand the tilde (~) at the end of a file displayed in bash is a backup file in the Linux file system. Is there a way to keep these hidden when listing the contents of a directory?
View 2 Replies View RelatedI cannot move a my file into my archives directory in my bash scrip.
View 7 Replies View RelatedI have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
View 11 Replies View RelatedI want to read an ftp site [URL]...and download the sub-directory structure and ONLY the tagfiles to the local directory.
FROM THIS:
Code:
slackware
+--a
| |aaa_base-12.2.0-noarch-1.tgz
| |aaa_base-12.2.0-noarch-1.tgz.asc
[code]....
I tried wget + grep but that didn't work too well.
I was trying to install periscope, from the instructions here: http://code.google.com/p/periscope/wiki/NautilusSupport
The problem is that at:
cd ~/.nautilus/python-extensions
I get an error:
bash: cd: /home/mycomp/.nautilus/python-extensions: No such file or directory
I want to remove the index.html file alone in the every directory via bash script, for example i have 5 directories in the path /var/www/vhost
anish
kumar
linux
question
friend
each directories have index.html file now i want to replace the index.html file alone from the other directory /var/tmp/vhosbak
anish
kumar
linux
question
friend
How we can do this using script?
# /etc/init.d/dhcpd.conf -bash: /etc/init.d/dhcpd.conf: No such file or directory what is the problem? and how to configure out "joe"
View 5 Replies View RelatedI have downloaded the latest gnome commander source code from the gnome commander home page. Following the instructions in the readme I have extracted it from the tar ball and changed to the top level directory of the source code. I execute ./configure and get a bunch of "checking" results.
Quote:
bash: ./configure: No such file or directory
ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9/src$ cd ..
ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9$ ./configure
[code]....
I find Makefile.am and Makefile.in present in the directory. I generally install from deb packages. Still, I don't think it should be this hard to compile a package given the seemingly simple directions provided.
I have very little linux experience. And need some help with a bash script. I need to a script I can set cron to run to sort files out of a holding folder into final folders. It doesn't necessarily have to be bash, but I think it would be sufficient for this. File names are formatted as such when created: Dest-Date-Time-CID-Destination# I want the files to be moved from a all in one holding folder to a folder structure like this.
.../storage/year/month/day/Destination#/VarX(type)/hour/CID/'File'
I would need an if/else if/else statement to say if Dest = A set VarX = B If for example the file name was
infinity-20100927-17:00-1112223333-4445556666.wav
I would like the above file to end up moved from
.../holding
to
.../storage/2010/09/27/4445556666/Inbound/17/1112223333/infinity-20100927-17:00-1112223333-4445556666.wav
So the script will need to make directories based on information in the file name which is delimited by single dashes. Then move files from the holding folder to the newly created "sorted" folders.
I'm writing a script to execute bash commands in the PHP CLI. I would like to suppress errors from bash and write my own error message if an error occurs. So far I have this (assuming log.txt doesn't exist!):
Code:
tac log.txt 2>/dev/null
Which works as expected, tac kicks up an error but the error is suppressed, but when I use this:
Code:
tac < log.txt 2>/dev/null
I get:
Code:
bash: log.txt: No such file or directory
The tac error is suppressed but bash still gives me a dirty error.
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I'm trying to install a copy of Postgres using the .bin(I want pg Admin III as well which is why I'm not using apt-get). It's sitting in downloads so I did the following:
$ cd /home/ryan/Downloads
$ sudo chmod +x postgresql-9.0.4-1-linux.bin
$ ./postgresql-9.0.4-1-linux.bin
but I keep getting: -bash: ./postgresql-9.0.4-1-linux.bin: No such file or directory I did -ls and the file is there and I can't figure out how to get this installed.
Just installed 10.04 64bit and in gnome-terminal i have no bash completion when sudo is used.For example:apt- gives apt-getbut sudo apt- does nothing, i get no suggestions from the terminal.
View 6 Replies View RelatedTo start, I'm writing a script to check a file's date via FTP. Here's the portion that I'm having problems with:
Code:
function checkRemote
{
[code]...