Recently did a clean install (instead of upgrade) of 11.04 from 10.10 and this error bugged me for the first time.
ubuntu@ubuntu:~$ sudo apt-get install grub-pc Reading package lists... Done Building dependency tree
[code]....
followed this one too to the letter: ubuntu@ubuntu:~$ sudo chroot /mnt/clean/sda1 apt-get install -y grub-pc chroot: failed to run command `apt-get': No such file or directory tried this one too:
ubuntu@ubuntu:~$ sudo grub-install /dev/sda1/usr/sbin/grub-probe: error: cannot stat `aufs'.and this too which got me a bash something:
ubuntu@ubuntu:~$ sudo mount /dev/sda1 /mnt ubuntu@ubuntu:~$ sudo mount -o bind /sys /mnt/sys ubuntu@ubuntu:~$ sudo mount -o bind /sys /mnt/sys
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
It's meant to move old files from my Downloads folder into an archive file (later tar them). The directory exists, I've used $PWD and nautilus and ls to make sure it's there, yet for every file it gives
Code: find: `cp /home/chris/Download/foo.bar /home/chris/Downloads/ARCHIVE/2011-08-19': No such file or directory I tried to test it on a different destination, specifically my home folder. IT still gave me the error.IS it a bad syntax within find or something else? I'm running a 32-bit system with 11.04
I create a bash script that writes another bash file. But in the generated bash file I want to write a bash command in the file and not executing it.Here's my bash file:
Code: #!/bin/bash cat > ~/generateGridmix2data.sh << END
I'm using OpenSSH 5.5p1 on Fedora 15. I'm trying to get a chrootDirectory to work. Specifically trying to figure out why I can't write files to a sub-directory of the chroot directory. I created a user test_user and created a group called sftp. I added test_user to the sftp group. I edited /etc/ssh/sshd_config as follows:
Code:
Subsystem sftp internal-sftp Match group sftp ChrootDirectory /home/sftp_users/%u X11Forwarding no
I am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
I had netbeans installed and I removed it using wheris netbeans and then sudo rm whatever files it gave.I also remember doing sudo rm -r /usr/lib/netbeans6.9 I did this because i wanted to install netbeans via the repo. Now I installed netbeans suing
Code:
varun@varun:~$ sudo apt-get install netbeans
and when I try running netbeans i get...
Code:
varun@varun:~$ netbeans /bin/bash: : No such file or directory
I just started to learn Bash. I need to work with what i know. Please keep that in mind.That said, here is my "problem":I often need to chroot to a Debian install from a Live-CD.So i need to:
mount the device of the OS mount /sys /proc and /dev on the mounted device. chroot
I upgraded my php from 5.1.6 to 5.2.10 but at php -v I got a weird error, so I figured let's reinstall some things. This was the probably very dumb commando I used:
yum remove gcc-c++l zlib zlib-devel php*
Now I think my whole server is fxxxed because I get the following messages:
-bash: /usr/bin/yum: No such file or directory -bash: rpm: command not found -bash: ls: command not found
And the only thing I'm glad about is I still have an SSH connection open because creating a new connection isn't possible either. what should I do to repair this all.
An executable fails to be found and run when called even though it is found and displayed by ls.I am on lucid LTS fully updated 32 bit.The file has permissions setup but any attempt to run it results in the error bash ./executablename No such file or directory
This situation also seems to be present in kcronsometimes my scripts dont run from it even thoughthe run now option does.This bug has been around since dapper it would be nice if someone could fix it.
I would like to keep track of not only what bash commands I used and when, but also where they were issued from, i.e. what was the current working directory when I issued "foobar" on a particular day and time. Can we ask bash history to keep track of working directories too? I have tried to get an idea of this reading the enormous "man bash", but I don't seem to have an answer yet either way.
i'm brand new to linux and honestly don't know how to use it very well and i am trying to install java, following the directions is not working i am stuck at Code: chmod a+x jre-6u<version>-linux-i586-rpm.bin it says bash: version: No such file or directory i downloaded the software to the downloads folder firefox uses as default.
Awhile back, PabloTwo pointed me to zenity as a way to create bash scripts with changeable parameters. That thread is here, for anyone interested in reading about it: [URL] Anyway, my problem is that I'm trying to capture input that contains double-dashes ("--") but zenity (or maybe or it's bash???) complains with the following error message:
"This option is not available. for all possible usages. bash: [/code]: No such file or directory"
Here's an example of what I'm doing:
Code:
# Select the time of day Flytime=`zenity --list --text="Select the Time" --radiolist --height=300 --width=300 --hide-column=2 --column="Select" --column="Code" --column="Time of Day" "" "--timeofday=real" "Local Time"
[code]....
What I want to accomplish is for the variable $Flytime to contain either "--timeofday=real" or "--timeofday=dawn" (without the quotes) depending upon which radio button is selected. I have tried escaping "--timeofday" (e.g. "--timeofday" and even "--timeofday") but that's not working.
So I have created a Bash script with the intent of the program to change the names of the files in a folder's subdirectory.The code recognises the individual subdirectories, then is able to enter into one and list the files individually, but when it tries to change their information it says;' cannot stat ' : ' No such file or directory 'As if it is looking in the directory that contains the Bash script, not its subdirectory.It is essentially saying, I see a file here called FILE but sorry, I can't change FILE because FILE doesn't exist. kweh?Is this something outside the capabilities of Bash? Am I asking too much of it? Can Bash only manipulate files that are in the same folder as the script?
Basically, I am trying to locate and copy the newest .json bookmark backup in my .mozilla/firefox/w987sdg9.default/bookmarkbackups directory.
I tried this
Code:
ls -t ~/.mozilla/firefox/b1ahb1ah.default/bookmarkbackups/ | head -1
which does return the newest file, but only the filename itself. I found readlink, but I haven't gotten that to output a full path which I can then feed to copy. So, it seems to me that find might work well here, and I know how to find based on absolute dates, but not relative.
How can I open the Firefox Profile Manager. I've googled and read but the directions don't work for me:
randymanme@randymanme-desktop:~$ /usr/lib/mozilla/firefox -ProfileManager bash: /usr/lib/mozilla/firefox: No such file or directory randymanme@randymanme-desktop:~$ /home/randymanme/mozilla/firefox -ProfileManager
I understand the tilde (~) at the end of a file displayed in bash is a backup file in the Linux file system. Is there a way to keep these hidden when listing the contents of a directory?
I have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
I am trying to grep multiple numbers from file, grep does have the -f option for that.
Code: grep -f <`seq 500 520` /etc/passwd I know this could be done with
Code: for i in `seq 500 520`; do grep "$i" /etc/passwd; done But my question is fare more behind this example. It is possible to redirect one command output which will be treat as a content of file for another command ?
Is there a way where i can chroot their user home directory, lets say the user login on linux box /home/user, what i wanted to do is to chroot /home/user where user won't be able to browse the filesystem which is /. Tnx
I updated my lucid alpha testing (64 bit)install after which I am unable to boot into any of my Ubuntu installs(sda11 has a dedicated Burg partition and sda10 has the stable karmic (32 bit)install and sda9 has the testing lucid install) Now I am trying to recover (rewrite Burg or at least grub2 on the MBR) my installs
This is what happens custom@custom:~$ sudo mount /dev/sda10 /mnt custom@custom:~$ sudo mount -o bind /dev /mnt/dev custom@custom:~$ chroot/mnt
[code]....
i tried a slightly different code with little success
custom@custom:~$ sudo mount /dev/sda10 /mnt mount: /dev/sda10 already mounted or /mnt busy mount: according to mtab, /dev/sda10 is already mounted on /mnt
[code]....
I also ran a whereis for bash and it also is there
I have downloaded the latest gnome commander source code from the gnome commander home page. Following the instructions in the readme I have extracted it from the tar ball and changed to the top level directory of the source code. I execute ./configure and get a bunch of "checking" results.
Quote:
bash: ./configure: No such file or directory ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9/src$ cd .. ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9$ ./configure
[code]....
I find Makefile.am and Makefile.in present in the directory. I generally install from deb packages. Still, I don't think it should be this hard to compile a package given the seemingly simple directions provided.