Ubuntu :: 10.10 64bit Install Halts At 61% File Copy?
Oct 23, 2010
I am having some issues installing Kubuntu 10.10 64bit, I have tried two ISO's from different mirrors, multiple writable disks (seriously I had to go buy another 20 pack) and the install halts at the exact same point each time.I have run multiple HDD checking tools using Hirens 9.9 boot CD, I have recreated and formated the partitions twice but still each time the install will stop at 61% stating there was an error copying files and to check the media.
I grabbed the ISO's from Kubuntu.org and the second one from the NZ mirror ftp.citylink.co.nz in the hopes that maybe the image came down corrupt - the disk check before installing cannot find anything wrong yet it still happens ... its very upside down face
Specs:
Intel Core 2 Duo 2.8
4GB DDR 2 Ram
SDA: 1TBsda1: ntfs /windows
sda2: Extendedsda5: ext 4 /
sda6: ext 4 /home
sda7: swapSDB: 1TBsdb1: ntfs /steamnvidia 9800GTX
View 4 Replies
ADVERTISEMENT
Dec 8, 2010
I would like to build up a multi boot system with 11.3 on ASUS M2N32 WS motherboard inclusive NVIDIA nForce 590 SLI RAID controller and Marwell 88SE614xSATA connectors.The problem is that if I built up the RAID-1 arrays (2x500, 2x1000) it cannot be seen from Suse install. As far as I investigated the nForce driver is in 11.3, but in this case why the installation hangs (no reset button, only power off). Sorry I cannot provide you a log, becuase the installation procedure goes to the restart, the system restarts, and Grube says error 15 or 21.
View 2 Replies
View Related
Jun 11, 2011
I have an electricity issue i.e Electric Power stops ocassionaly (Load Shedding). If the system was running when electricity went. But when the power comes back, the system starts and opensuse stops before login screen on console screen where it requires root password and then fsck for filesystem. Is there anyways to avoid it?
View 1 Replies
View Related
Jan 29, 2010
I am installing debian 4.0R3.I get to the screen that shows select and install software and it halts at 5 %
View 3 Replies
View Related
Feb 3, 2011
I installed fedora 14 on my Dell studio xps 1645 with CPU intel i7 core inside.
I downloaded the microcode.dat file from the intel website to update the revision of the CPU.
I tried to put it in /etc/ but no update was done. also in /etc/firmware (after creating the latter directory), and no update was done. also in /lib/firmware (after renaming the current microcode.dat file) and no update was done.
View 1 Replies
View Related
Mar 1, 2011
How to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).
More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.
View 1 Replies
View Related
Feb 16, 2011
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies
View Related
Jun 23, 2010
I want to copy a file into my Root folder but I cant.what should I do?
View 2 Replies
View Related
Mar 5, 2010
I did a full install on 5.4 64bit. the installation aborted with the following errors:
View 1 Replies
View Related
Jan 19, 2010
OK, finally was able to create a driver disk for my LSI Logic 53C1030 integrated adapter, and managed to successfully have it be read by the installer in the beginning of a brand new CentOS 5.4 install.
Unfortunately, a couple screens in, right after the LOADING SCSI DRIVER screens of the "mptbase" and "mptscsi" it appears that the system is halting/freezing with the screen of:
LOADING SCSI DRIVER
Loading mptspi driver...
View 19 Replies
View Related
Jul 21, 2011
I m trying to install fedora 15 on a computer I've just built (which is already running windows 7).
asrock h61m/u3s3 lga 1155 intel motherboard
intel i5-2500 processor
radeon HD 6850 graphics card
After selecting "install a new system or upgrade an existing system" the installation process completely halts at "waiting for hardware to initialize." I looked this up and tried various boot options which frankly, I don't know what exactly they do. Setting "nomodeset" changed nothing as did various others like "noefi". When "ignore_loglevel" was set, the progress went a little further past "waiting for hardware to initialize" stopping after this:
[15.106386] atl1c 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IQR 18
[15.106639] atl1c 0000:05:00.0: setting latency timer to 64
[15.139841] [drm] Initialized drm 1.1.0 20060810
From what I've gathered from looking this issue up for the past few days, it is probably a graphics card issue. However, I did remove my graphics card and tried using the input directly to the motherboard and had similar issues. I'm not sure what other information is relevant but I can try to relay as much as I can if it is needed.
View 9 Replies
View Related
Feb 19, 2010
I downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies
View Related
May 26, 2011
I'm trying to install a copy of Postgres using the .bin(I want pg Admin III as well which is why I'm not using apt-get). It's sitting in downloads so I did the following:
$ cd /home/ryan/Downloads
$ sudo chmod +x postgresql-9.0.4-1-linux.bin
$ ./postgresql-9.0.4-1-linux.bin
but I keep getting: -bash: ./postgresql-9.0.4-1-linux.bin: No such file or directory I did -ls and the file is there and I can't figure out how to get this installed.
View 9 Replies
View Related
May 27, 2011
I have tried: 1. zcat boot.img.gz > /dev/sde and copy the image file debian-testing-amd64-netinst.iso to the usb-stick. 2. and manual whit syslinux /dev/sde1And also various builds of testing and it can't load the image file. always i get the error message "Filed to copy file from cd-rom"And i cant ether install 6,01 Before the image debian stable 6,0 worked and several testing builds before the stable release 6.0.The boot process work flawless but installer can not find the iso according to error msgI have verified the iso file with md5sum and made sure to write out to de stick whit sync.And haven't changed my bios boot that worked before.
View 4 Replies
View Related
Jun 18, 2009
I've just installed F11 (x86_64) on my computer. I've been using x86_64 since Fedora 7 and normally I use a manually installed i386 firefox/thunderbird. This time I've tried to do the same using Fireox 3.5b4 but I got many troubles. The last error I got is:
./firefox-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory but that lib is not available on the standard repository. I've tried to use the i386 version of thunderbird (2.0.0.9) but I got this error: ./thunderbird-bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory but on the repository there is just the libstdc++-4.4.0-4.i586 lib.
View 4 Replies
View Related
Mar 22, 2011
Now i install the Ubuntu 10.4 64 bit on Sunfire X4170I want to save the file via SSH to this server.But i m not sure how to configure.
View 4 Replies
View Related
Jun 14, 2011
I have just been bothered by a fairly small issue for some time now. I am trying to search (using find -name) for some .jpg files recursively. This is a Redhat environment with bash.
I get this job done though I need to copy ALL of them and put them in a separate folder BUT I also need to keep the order intact after copying.
For e.g - If I get a JPG file under /home/usr/new/1/ then the destination also needs to be /test/old/new/1/.
At the moment, I am simply putting all files under /test/old/ and I can't somehow get the later /new/1/ folder path created under /test/old/
I understand this could well be done using while OR if else loop, though if someone can just guide me with a hint, I would be really grateful.
I will complete the rest of the steps and was asking here since I am still not comfortable with the shell/bash scripts yet and planning to be really good at it over the next couple of months.
View 1 Replies
View Related
Apr 19, 2011
I have a .txt-file with ~50.000 lines of numbers, generated by a mathematics program. From this file, I need line ~ 1.100 to line ~16.000 (these lines are always the same btw, this may make the solution easier, dunno) to be copy/pasted to another file, where the lines ~500 to ~15.000 (also, every time the same) should be overwritten by the aforementioned lines...I haven't found or come up with anything that works yet, mostly I find solutions to copy everything from one file to another but I can't find something to specifically overwrite a part of a file with part of another.
View 4 Replies
View Related
Aug 17, 2015
There is this bug in the latest version of Ubuntu, which is also Jessie, which is:
Can't copy a file from SMB share to the local file system: Software caused connection abort
The problem, apparently, is that newer versions of Samba hit servers with multiple requests at the same time, and for some reason the Zyxel and Iomega boxes can't handle this. The best solution they've come up with is to modify the smb.conf file on your server to include this setting: "max mux = 1".
Here is the reference material on this bug: [URL] ....
People who develop samba have fixed it in the latest version but neither the ubuntu nor Debian have released the fixed version of nautilus, as of yet. Here, is the reference: [URL] ....
View 0 Replies
View Related
Jun 3, 2010
I had a situation in which the the path of the file to be copied is written in other file and I had to copy it using shell script..I can use cp $(cat /home/robert/location.txt) /media/sda1 on normal linux shell...But I am using buildroot script where $(cat /home/robert/location.txt) evaluate to nothing..is just blank..
View 1 Replies
View Related
May 28, 2010
I wanted to copy one file to multiple new files. I have an idea to write a script and do the operation. But here i m looking for any particular command to do this operation.
View 1 Replies
View Related
Nov 16, 2010
I have an embedded linux system (Debian 'Lenny') which booting from a microSD flash. If I make a copy of a file on the flash file system (cp test test1) and then power off (disconnect power spontanious). Connects power again and the system come up, but the file test1 is gone. How can I secure that test1 is NOT disappear if the power get lost?If I copy file and then restart system with reboot command, the file test1 does not disappear.
View 7 Replies
View Related
Sep 19, 2009
favor and let me know how can I copy some text in one file and paste it to another file ,when both of the files are being opened by vi text editor ?
View 7 Replies
View Related
Oct 18, 2010
I have a C-function that create a file and then make a copy in the same directory, but somethin is wrong with permission or owners.The program starts as root user.The file creates by the program:
-rwxrwxrwx 1 root staff 199680 Oct 18 10:58 test
Ok, but after copying the permission is not the same.The file after copying (with new name) by the program:
-rw-r--r-- 1 root root 199680 Oct 18 10:58 test_copy
I want to have full permission of the copy, how to do??
View 2 Replies
View Related
Sep 9, 2010
Yesterday I was working on my laptop using the windows 7 partition. At some point it froze and I ended up just having to shutting it down by holding in the power button. When I started it up, it said something along the lines of "can't find bootable partition".
So I made myself a ubuntu flash-drive, and ran
Code:
sudo fdisk -l
This is my output.
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x74836e35 .....
View 1 Replies
View Related
Feb 8, 2011
After the login screen, the KDE icons appear.When it gets to "HDD" icon, it halts and the only option remaining is to reboot.I can't boot into the terminal environment. When I try that, I get an empty screen without text (maybe because of "quiet splash"?
View 4 Replies
View Related
Jun 5, 2011
today installed ubuntu an a external hdd and booted from it it works fine for about 4-5 minutes after it halts. not even mouse pointer moves.what may be the problem. specs:
1.external hdd seagate 500gb (100 gb partition for ubuntu)(USB-only)
2.ram:2gb
3.processor:intel dual core.
4.chipset:intel
View 5 Replies
View Related
Jul 22, 2009
Just installed Ubuntu 9.04 last night. All seems perfect except on shutddown. It seems to go through all shutdown processes but right about the time you expect the computer to turn off a message says: "system halted [4027.514883]" Have Googled it but no matches. If I just push the on/off button at that point it shuts off immediately
View 4 Replies
View Related
Feb 10, 2010
I purchased the TEW-423/C1.1R based on posts which indicated it works with Ubuntu (or at least linux) out of the box. I wanted a card that was supported with native drivers - no messing with ndiswrapper and such. The Trendnet TEW-423 is posted as working out of the box with the Realtek chip RTL8185. My unit has the chip (RT8185). The posting is at [URL]...
With the card inserted, Ubu 9.04 and 9.10 freeze at boot time. 9.10 freezes when the logo appears, 9.04 freezes at the arrow which comes after the logo. Remove the card and full boot is enabled. Obviously this card is not working out of the box.
View 6 Replies
View Related
Jun 9, 2010
Ive tried to install ubuntu via wubi. When it boots and i select ubuntu it starts the final installation tasks. But halts with no rootfs defined and says i need to define one. However it wont continue to boot obviously so am unable to do so. My PC does have raid but its switched off in the bios. I know dual booting is one way to go but would prefer initially to have it in the file. I can boot into the demo version and there is an install option there but doesnt offer my boot disk.
View 4 Replies
View Related
