Ubuntu :: 10.04 Bug NO BOOT / Mounting None On / Dev Failed
Jun 22, 2010
I've googled this issue ad nauseum but alas my poor PC is still quiet as a church mouse.I was prompted to upgrade to 10.04 and, despite knowing better by now (I seem to file a severe bug report following each upgrade), I chose to allow the upgrade to move forward due to a driver problem I thought might be fixed in the new version.The upgrade took over 9 hours but did complete and I rebooted afterwards. I never got my PC back, it's stuck during bootup on "mounting none on /dev failed".
Be cautious with advice. There is no menu.lst any more, this is Grub2.I have booted off of the Live CD and run the grub-install and mkconfig. I have edited grub to try different menu options by default. Each time, grub builds with 2 different kernels listed, neither of which are correct.
I installed ubuntu 10.04 from the CD (downloaded from ubuntu website), all worked very well. until today that I decided to run the software updater. It installed all the updates correctly, I restarted ok, but i experienced a mini locks, for example when i was with firefox, firefox had mini hangs for about 15 seconds then run normally. Then all OS got unstable, windows showing no thing, for example when i tried to restart using the button, it didnot do anything. Well i reset my computer and BOOM!, im stuck after Grub showing me this:
mount : mounting /dev on /root/dev failed : No such file or directory mount : mounting /sys on /root/sys failed : No such file or directory mount : mounting /proc on /root/proc failed : No such file or directory
[code]....
I'm able to reproduce this. I installed a fresh 10.4 again, then installed propietary drivers (nvidia), restart, all working flawless here, then updating all packages using the update-manager, restart, here not all working well (same sympthoms) so i decided to restart, then BOOM AGAIN.. I did the process 3 times and, the same, so I think something is BROKEN. So im able to reproduce it but don't know what the hell is causing it.
After upgrading from 10.04 to 10.10 I have had some problems booting my Ubuntu. It all started when restarting after the upgrade, and I got the error;
Code:
mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting / sys/ on root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or dirctory Target filesystem doesn't have /sbin/init. No init found. Try passing init= boot arg
BusyBox v1.13.3 (Ubuntu 1:1.13.3.1ubuntu11) built-in shell (ash)(initramfs) After searching the Internet, I found a "solution". I just had to boot with a USB stick with the Ubuntu Rescue Remix (the normal Ubuntu USB won't boot either), and i wrote;
Code:
sudo fsck /dev/sdb5
Now I could start my Ubuntu again. So whats the problem? If I turn off my computer the normal way, there is no problem, but if I log off, put it into sleep mode, if something happens and I have to turn it off with the button it goes back to the first problem, and I have to reboot it with the USB stick and fix it all over again! If I don't have the USB stick with me, I probably wont be able to use my laptop!
Okay, so on occasion when I boot into ubuntu I get this error
[mount: mounting /dev /root/dev failed: no such file or directory] [mount: mounting /dev /root/sys failed: no such file or directory] [mount: mounting /dev /root/proc failed: no such file or directory]
[code]...
I get the error when I open any of the kernel versions or any recovery mode. Ubuntu 10.10 Desktop is the only OS installed on the computer, which is a Lenovo S10-3. I can eventually get it to go away, sometimes by repeatedly unplugging it and plugging it back in, and sometimes I will boot into GParted, do nothing, then restart and it will work.I have found some solutions online, but all of them involve the error happening as a result of dual booting with Windows.I have made no major system changes recently, so I can't see anything like that being the problem.
Just the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
I'm running Lucid with the 2.6.32-28-generic and 2.6.31-11-rt(abogani's ppa) kernels, on a fairly new laptop.When I boot the rt-kernel, right after grub I get a message:Code:mount: mounting none on /dev failed: no such deviceW: devtmpfs not available, falling back to tmpfs for /devThen after a few seconds, I see a lot of fast moving text and then Ubuntu starts just fine.when booting the generic kernel, I don't see any text at all, but it uses just as long time as the rt-kernel, so I guess the problem affects both.
I placed Ubuntu on the same drive as my windows XP is, and there were no problems, everything was fine, all drivers were working...I need to use kernel 2.6.29 and i read about "how to install a new kernel" on this forum. I downloaded 3 files, I installed them in a good sequence. After reboot I can choose between 3 kernels, and if I choose this, then there is a mounting problem:
mounting none on /dev failed
Afterthat there is written something else, what I cant read. Some seconds later ubuntu boots, but my (non-USB) mouse isnt working.
I'm trying to install ubuntu 9.10, downloaded the iso from the site and burned it on a CD, but when I boot from my cdroom drive and choose install ubuntu option I get an ubuntu grey logo for a couple seconds and the I get this error:
I tried downloading a new copy and burning a new CD but still have the same error, no matter what option I choose when booting the CD.
Does anyone now whats the problem? What I'd like to do is install linux as the only OS (formating everything else) not dual boot or anything, I'm new to linux so it'd help if you guys could give me details on how to fix it
I have installed previous versions of ubuntu on this same computer but using the wizard inside windows.
I have recently experienced a problem that occurred after an automatic update. After the update it said restart system. So I did and proceeded as normal. when after the reboot Firefox suddenly stopped working, crashed and upon clicking it again only a blank box appeared. Then my other apps followed and i soon couldn't do anything so i shut down my computer. Upon restart I got a black screen with tons of text and something around the lines of
mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting / sys/ on root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or dirctory
[code]....
So I rebooted and pressed shift to open that grub thing and booted from an earlier kernel. This time it said checking HD for errors and after booted normally. Everything seemed fine but next day it did it again. Starting with Firefox crashing and then everything else. I again booted from a previous kernel and it worked but upon checking with uname -a it did not list the kernel i chose to boot from. So I decided to upgrade 10.04 to 10.10. This upgraded my kernel and deleted the old ones so i am hoping i am good now.
I posted a similar problem sometime last week...but a little has changed(mainly I can access my files now): I recently performed the auto upgrade to Ubuntu 10.04 and upon restart of my machine I am presented with 3 screens. The first is a simple "GRUB loading". The second is "mount: mounting none on /dev failed: no such device". The third screen is a series of initializations, i.e. /dev/sda1:
clean, (number of files), (number of blocks) *setting preliminary keymap... and so on until it hits the line: *checking battery status
at which point it will cease loading until i press the power button. The next thing that occurs is it kills all the processes it just initialized and shuts down the computer. I read that this is likely a problem from loading the wrong kernel and I can get into my files (using a boot 9.10 boot key). The problem is I don't know what files to change in order to get my system booting the right kernel.
I've just got a new laptop with 4GB RAM available, in order to fully utilize the available memory I'm going to install Ubuntu Lucid Lynx 64bit, but when I boot with Live CD, I always get the following errors:
Code:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
I'm trying to connect to a webdav server with very poor luck. My preference would be to mount it to my file system, but simply connecting with Cadaver would be fine too.
I've tried:
Code: mparks@mparks:~$ sudo mount -t davfs https://<host>:<port>/<path> /media/webdrives/<mount-dir> [sudo] password for mparks: Please enter the username to authenticate with server
I am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command: # mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response: mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device
since running update manager on my daughters net running 10.04 netbook on boot up I get the following on the screen
mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn�t have /sbin/init.
Vista refused to boot past login and eventually froze up in safe mode, preventing me from even safely copying files to a storage device. My friend suggested trying Ubuntu temporarily, and I'm currently running it as a trial from a key thob.I'm very much a newbie to the OS but after some getting used to and playing around over a few days Im happy to make the switch permanently. I managed to take off the needed files, and then went on to do some cleaning up of my harddrive to make some room for a partition for Ubuntu. I was removing things like old music, videos and games, nothing vital, but after I reset I tried to enter the C drive Im given this message:
Error mounting: mount exited with exit code 18: Failed to open hiberfil.sys data attribute: No such file or directory Failed to mount '/dev/sda2': No such file or directoryMy HD is currently partitioned for two 150gb drives, and I can still use my D drive fine for all purposes.
Doesn't seem to matter which version, every time I try to install Software raid on an Ubuntu server system, it blows up with this error. Seems I've had trouble for several versions.
Code:
mount: mounting /dev/disk/by-uuid/f35415ee-4c14-4eb1-995f-f19fbcd760c7 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory
[code]...
I've done it on Centos Fine, and followed the many different instructions I've seen for Ubuntu. The only luck I've had was with bios raid, but I would much rather let Mdadm handle things.
My build:
ubuntu-10.04.2-server-amd64 CD install AMD 1055T 6Core 4GB ram Asus M4A88TD-MUSB3
[code]...
I install both as letting Ubuntu decide partitions for one drive, do the same for the other, and create a raid, and do them from scratch. No dice, same problem. I've tried that one as logical and as primary too. No difference. Something just doesn't like booting from a raid 1 Mirror. I've tried installing grub on both HDDs (sda1 + sdb1)I've tried several CDs, burned from several machines. Re-downloaded from Torrent and from the website. The DVD drives work since I purchased new DVD drives for both one workstation and the server. Things install fine under CentOS, software raid comes up.
A few days ago I got this Ubuntu box (9.10) to connect to the Windows network in our house. Sharing printers and files. Life was good. But today, Places > Network > Workgroup tries to connect for about a minute then I get a "Unable to mount locations, Failed to retrieve share list from server" error. The only thing I recall changing at around the same time was adding Wine.
I am using an embed linux application and trying to mount a USB device. The USB worked fine in windows. I then put it on my Linux box formatted (I hope correctly) And then tried to do the following to mount it
Code:
Disk /dev/sda: 4040 MB, 4040748544 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I just did a full install of Slackware64 on my netbook. Everything was sweet until I tried switching to the generic kernel. Even before this, I noticed when I ran the mount command it listed not sda3, which really is the root partition, but /dev/root as the root partition. This also appears in mtab, but not fstab. So yeah, here are the errors when I try booting into the generic kernel:
Code: mounting /dev/sda3 on /mnt failed: No such device No /sbin/init found on rootdev (or not mounted) bin/sh: cant access tty: job control turned off
I've tried rebuilding the mkinitrd_command_generator.sh script several times, as well as lilo.conf. But no success I've looked at some similar old threadss here but most of them are related to slackware 12 and older, so I don't know if these issues are related or not.
I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.
But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.
So i insert the ubuntu 10.10 in the dvd and boot it. The menu comes up and i choose to install ubuntu. After that it shows some black screens and this error:
(initramfs)mount:mounting/dev/loop0 on//filesystem.squashfs failed: Input/output error cannot mount /dev/loop0(/cdrom/casper/filesystem.squashfs)on//filesystem.squashfs
The disc aint scratched. I tried installing from Windows but i got another error.
And for some odd reason Ic ant make a removable startup disk:
Running NFS on Fedora 10. Exports fine. I tested it locally. I tested the NFS configuration by trying to access the exported directory from my local machine, before testing it from a remote machine. While logged in as root, I created a new directory "/mnt/nfstest".
Then I mounted the NFS share at the new directory I created: [root@eric root]# mount -t nfs localhost:/mnt/nfs /mnt/nfstest
When I tried to mount on the remote client: [root@frank root]# mount -t nfs eric:/mnt/nfs /mnt/nfstest
After a while I got: # mount eric:/mnt/nfs /mnt/nfstest mount.nfs: mount system call failed
I tried strace but wasn't sure what I was looking for, but I've attached the results as a .odt file.
I'm trying to mount my new Western Digital Elements 2tb hard drive, but every time I try to plug it into the computer I get this error message:
Quote:
Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS),
[code].....
But when I tried opening the hard drive from nautilus I still got the same error message as above (no other volumes was connected at the time). I've also tried opening and watching it in GParted, and I can see it there as a volume that's not allocated. When I tried to allocate the hard it I got the message that it had no partition table. And that I cold make one. I tried and Ubuntu suggested to make a MS-DOS partition table for it. But there I got a little scared as I've not done this before. The external hard drive is brand new and was brought today. And I don't have the possibility to test it with Windows or Mac as I'm using Linux only on my machines.
I can not use nfs from F10 client to F12 server. nfs mount on F10 to F12 times out anf nfs4 mount gives "mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory" I have tried to close firewall and set selinux to permissive mode on both client and server with same result. Samba works fine. On server [root@flokipal ~]# mount -t nfs4 localhost:/home /media/tonlist mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory
but
[root@flokipal ~]# mount -t nfs localhost:/home /media/tonlist [root@flokipal ~]#
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
which run without errors but an attempt to mount throws up the above error as well as saying - you must specify the file type (tried that) - and fails to mount. I've tried using YaST to format and encrypt it which throws up the same error when I run mount but actually does actually mount the filesystem Googling around has brought up info saying that it's probably a race condition brought on by invalid udev rules. I've got a (mostly) working system and the udev rules documentation leaves more confused than when I started.
I am trying to replace an old, smaller, and dying laptop hard drive with a newer one, using a USB external drive. I first tried cloning disk to disk with Clonezilla, but it failed after cloning my root, swap, and /home directories it froze when it tried to reinstall grub. After 2x trying, I switched to dd, which I have never really used (I am fairly new to Linux in general). The actual command I used was:
All seemed ok and after approximately 2 hours my 80GB drive had been cloned onto my new 250GB, with dd giving what appeared to be a satisfactory closure summary. I tried to mount and access the drive from my external USB enclosure but could not view it, though the data is there, I believe, as the size and bytes show... The error that Dolphin is giving me is:
Quote:
error - wrong fstype, bad option, bad superblock on /dev/sdb1 Missing codepage or helper program or other error. When I installed the new drive directly into my laptop, it begins to boot (Sabayon 5.4, 2.6.35 kernel) but almost immediately I get (handwritten down, but this is close):
Quote:
detected real_root mounting /dev/sda1 on /newroot failed: input/output error !! Could not mount specified ROOT, try again !! Could not find the root block device in .
[code]....
I am assuming that my issue has something to do with grub, and maybe specific UUIDs that don't match (?) but I'm not really certain. I have both Grub Legacy 0.9x and the newer Grub 2 installed (Sabayon is already moving over) but I still boot with Legacy, not with the new 2, as I don't know how to switch, and am not sure if I should yet. I thought that dd copied bit for bit, and I added the noerrorï just to try to get it all transferred, so I don't know what went wrong exactly, though something seems wrong with grub and the bootloader, I guess...
