I am having a strange problem. file.avi is in host:/host:/ is mounted in client:/ via sftp on evolutionwhile sitting on client: double clicking on file.avi opens Totem which starts to stream and only shows a blank screen (audio is fine).Copying file.avi to client:/ and then playing it on totem is fine, so it is not a gstreamer issue. I would doubt this is bandwidth as it should just buffer longer, this is over a wireless network.
V.L.C. and all others - but Totem - video players that I have installed have audio out of sync. This occurs in both D.V.D. and .mkv & .avi. I had this problem with V.L.C. 1.1.10 & now with 1.1.11. I do not think that this is a problem with V.L.C. since I have had the same issue occur with gnome-mplayer. I tried to downgrade gstreamer*, and that did not correct my problem. It shouldn't be a problem with libdvd* since the problem still occurs with files on my drive. Handbrake doesn't fail to rip D.V.D correctly.
Because of all of this I figure that it must be a system library that Totem and HandBrake don't use ( or bundle most likely in the case of HandBrake ).I am using Fedora 15 x86_64 with all updates to date.
Debian 5 (Lenny) 2.6.26-2-686 When logged in as my main account I can play videos in Totem and VLC. But when logged in with my "mythtv" user account, all I get is a blank screen, but the audio works. I suspected a permissions issue and thought maybe I should add mythtv to the video group? Something to try. But when I go to System > Administration > Users and Groups, I don't have a mythtv user listed. The user does exist, I log in with it. Also, I have: mythtv:x:113:121::/var/lib/mythtv:/bin/sh in /etc/passwd I just don't know where to begin looking for this, since it is working for other users, just not the one I need it to.
I have a desktop hooked up to a router and plugged into my TV. I like to run Totem and have videos running full screen on my TV. I would like to control that Totem using my laptop (connected to the same router over wifi). How would I go about doing that? I connected to my desktop using SSH and tried to send signals to Totem, but nothing worked. I tried using VNC, and that was ineffective as well.
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
I am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.
dell inspiron e1505 3.2 gb ram 1.86 ghz intel core duo ati x1400 gfx opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
I have the audio out of the media machine passed into the line in on my workstation. It's just handly to have the audio pass in this way so that i can manage the volume or headphones or whatever from one machine.
This worked, and worked well, for a very long time. I recently reinstalled the workstion, FC14 still. After the reinstall, my passthrough doesn't work.
If i start up some media on the media machine, and then open up the volume control on the workstation, i can see the volume meter moving along with the audio, but nothing plays out of my speakers.
i have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...
I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
Is there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
I just downloaded a new version of totem movie player because the older one had a bug while taking a screenshot which has been reported already I saw.I have the tar.gz with a lot of files in it, so how to install it easily?
I am using ubuntu 10.04 having totem 2.30.0 based on gstreamer 0.10.28I recently discovered an option in side bar bbc (apart from properties,.....,playlist)It downloaded 5-6MB of data for playlist then parsed them & displayed a list of interesting programmes of around 0.5 hour duration.
How can I download these mp3 files ? I could not find working radio at URL...
I recently switched over to Debian Squeeze and now that I'm over the transition shock I'm starting to enjoy it a lot more than I thought I would. One little thing that is very irritating, though not show-stopping, is the fact that I cannot change the default media player in GNOME.Totem I just can't stand it for some reason and I would like to just remove it. So I whip out my'apt-get remove totem' only to see that Totem is tied to a number of GNOME components that I want to keep. Now why a media player is so intertwined with GNOME I have no idea, at least that would be appropriate to express here.Normally to change my default media player I right click on a media file, open with, remember this app for this type of file, and then I'm done. I also tried using the 'Preferred Applications' option under the 'System --> Preferences' menu with no success.
As I said this problem isn't a show-stopper but it is blankety-blankin' annoying. Any thoughts on how to resolve this would be appreciated. I have spent some time searching online but to no avail. Although I no absolutely nothing about software development I can only hope that this is a bug and that the GNOME developers didn't actually intend this. If it were intentional it would seem analogous to Windows 7 in that there is no way to remove IE from the system. Oh but you can disable it and hide it from the menu. . .
As my exploration through Fedora is going quite well (and due to recent problems that I haven't been able to fix in Ubuntu, it's drawing me to Fedora even more), I still have another small question. I listen to basslover.de constantly, and when I click on the Windows Media Player button to start that stream, Totem starts getting picky about my connection. We have two wireless networks (for a specific reason), and whenever I pick the faster router, Totem happily plays, but refuses to play on the slower one. I know it's not an internet problem because I can play from either network in Ubuntu, and I also updated my wireless in Fedora with a new set of madwifi drivers. Is this something I can fix?
EDIT: Also, if this isn't clear, Totem is playing the stream inside Firefox. EDIT 2: Hmm, strange. It suddenly worked on the slower connection if I changed DHCP settings to Manual and then gave in details along with the Google Public DNS servers. However, this works in Ubuntu while on DHCP.
I installed F13 beta yesterday, added RPMFusion's repos, updated and everything seemed ok, when the time came to add mp3 and video support I did the same as on F11, simply tried playing some mp3 and a rmvb video and after being asked to install missing codecs everything would work but! it didn't work for video, although it installed a bunch of files the rmvb video still won't play.
For now I installed mplayer and I can watch my videos alright, I also remember that on another opportunity the same happened to me and after a couple of updates the problem was fixed so no biggies but maybe someone can give me some advice on what to try to fix this? like remove a certain package and try reinstalling it.
Have very recently installed OPEN S on my PC. The DVD player( why is it called TOTEM? ) won't work. It asks for some plugins without saying which ones exactly. Have tried to follow some links it suggested but to no avail (me being too bleeding brainless, I presume). Am sure that eventually will find out the solution but for the time being stuck and not able to watch some of Hollywood's greatest masterpieces on my machine.
I opened a video file in totem and got a slide-show of 1 frame in 5 seconds. I then opened it in Kaffeine-KDE3 and it worked perfectly. What should I do to heve good speed in Gnome?
