I need to make a bootable grub2 CD. The instructions refer to /usr/lib/grub/i386-pc/stage2_eltorito. It is not supplied. Is it available separately, or do I need to build it myself? If so, how?
View 4 Replies
Id like to make bootable ISO of a directory using mkisofs + grub2.
View 3 Replies View RelatedToday, I used the Update Manager to do my first post-installation update of Ubuntu 9.10. I have a multi-boot setup (Ubuntu / WinXP), using GRUB2. Before the update, I had 5 options:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
[Code]...
Is it valid that the -14- has remained in the list? Surely I can only boot -20- now? How should I get rid of this version since it is added by update-grub because of the existence of this file: /boot/vmlinuz-2.6.31-14-generic,Should I delete the file or just rename it? Or is there a better way?
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies View RelatedTried to make a bootable usb from dvd 64 bit iso (Fedora 15).
I get the following message.
How can I make a bootable dvd with a image that has a .ndf extension?
View 1 Replies View RelatedI am on XP and just bought myself a eeePC but the USB installer method at [URL] site doesn't work for me. Any other alternate image writing utility that will transfer .iso image to my 4GB USB drive?
View 3 Replies View RelatedI know how to make a bootable Ubuntu disk on a USB but I want to know how can I make a windows cd bootable on a usb using Ubuntu. I only have Ubuntu installed on my computer but I want to make a small partition with Windows XP in it and I have the Windows XP CD and ISO but I dont know how to make a bootable USB in Ubuntu...
View 9 Replies View RelatedI need to boot the ultimate boot cd from an usb stick. Do I just copy the iso image to the usb key? How do I make the usb stick bootable?
View 3 Replies View Relatedis there any program that i can run under ubuntu 10.10 netbook remix and make windows XP installable from a flashdrive via a torrent i downloaded. i need to install windows back on this computer then reinstall linux and dual boot for work.
View 14 Replies View RelatedI am trying to make Ubuntu 11.04 USB using Arh linux I downloaded the CD iso and dd'ed it to the USB, it does not work How to make it using the 'normal' liunx tools (dd etc) and not the GUI USB maker ?
View 2 Replies View RelatedI'm using Truecrypt to encrypt my Windows 7 OS. I also have unencrypted Ubuntu 10.04 installed on /dev/sda6 on the same hard drive. Since Truecrypt bootloader must be installed in MBR, I have GRUB2 installed on /dev/sda6, so I can use TC bootloader to load GRUB2. When I first install GRUB2 on /dev/sda6, I can use TC bootloader to load Ubuntu. But, if I boot into Windows via TC bootloader, and then later try to boot into Ubuntu, I get the message "no bootable partition found". I have to reinstall GRUB2 onto /dev/sda6, every time after I use windows in order to be able to boot into Ubuntu. It seems that starting Windows somehow overwrites GRUB2. Is there a fix for this?
View 1 Replies View RelatedI just downloaded Ubuntu 9.04 while using the 8.10 live cd. I was planning to burn it to a disc, but I forgot all about the live cd issue. So is there anyway I can burn Ubuntu 9.04 without having to download it to a real os. Or can I make a bootable usb with the live cd of 8.10.
View 9 Replies View RelatedHow do I make a bootable USB from a Xp iso file with Ubuntu ?
View 3 Replies View RelatedAnyone know a good program which can make floppies bootable? I have looked in Synapitc with no luck, I only found floppy formaters.
View 5 Replies View RelatedI would like to know if there is some way to do a bootable usb to can install windows from ubuntu.
View 1 Replies View RelatedI need to install windows on my netbook in order to run some programs I need for school. I currently have Ubuntu 9.10 installed on here and am trying to make a bootable windows 7 usb. How I can do this?
View 5 Replies View RelatedI am trying to make a bootable usb with ubuntu 10.10. I want to wipe my hddn and install ubuntu 10.10 and win7 (dual boot). I cant use cds cause my cd drive is broken so usb is my only way. When I have created the usb it doesn't work properly. This is what happens when I start the comp. with the usb:
Larger pic: [URL]
I have tried to make the usb in both ubuntu and win7 with the same results. I have created a working usb boot before but with an older version. I have come across this problem sometime ago when I tried to burn kubunt on a cd. Think it was the 10.04 version.
Does anyone know how I can obtain a DVD ISO or how to convert the CD ISO to DVD to make it bootable?
View 2 Replies View RelatedI'd like to make a bootable usb that can save more than 4gb of changes, but I don't see a way to use anything other than FAT format when using the disk creator. I can format the hard drive in ext, but creator always reformats in FAT.
View 9 Replies View Relatedi want to copy an ubuntu system from one computer to another using netcat / tar. What directories should i exclude? also how do i make the new copy bootable?
View 1 Replies View RelatedI recently found myself in need of an installation of windows xp on my eee 901. I know I once did it long time ago (half year before I permanently moved over to ubuntu. How to make bootable usbstick for Ubuntu in XP.
View 2 Replies View Relatedhow to make bootable pendrive
View 5 Replies View Relatedi have been doing a house clearance and come across an old laptop nothing special but its old running windows 95 i think any way i have used dsl b4 as a bak up incase my pc went dawn haw do i get rid of windows and run dsl on this laptop as it only has a floppy drive and a 2.5 gig hard drive its a relik i know this but instead of throwing it away i thout that putting dsl on it i could make a web browser out of it just for fun is it possable to make a bootable floppy to run the new os on the laptop.
View 5 Replies View RelatedI have a linux ubuntu pc with superuser access, and a windows xp pc with no administrator access so I cannot make use of any formatting tool in that.
View 10 Replies View Relateddear friends I want to make linux bootable & live CD and pen drive
View 1 Replies View RelatedI have a very usefull Floppy Disk, when I boot from it, it boots into a Windows 95 menu, the initial screen has various options including an option to press shift + F5, when this is done it shows the command prompt A:. I have added various utilities to the floppy myself ie- fdisk, format, chkdisk, efdisk, xcopy, an early Norton Ghost, etc, etc. So I can partition a new hard disk, format it, delete partitions, ghost a disk, etc, etc, very handy. But floppies are becoming obsolete. I have tried burning the contents of this floppy to a CD, but I can't boot from this CD. I have tried various bootable CD programs from the net, including Ultimate Boot CD, but none of them work very well. I would like to make a bootable CD that will simply boot any computer with either a --new blank, unpartitioned, unformatted Hard Disk -- a hard disk with Windows, -- a hard disk with a Linux Distro, etc. When booting from this CD, it will boot to a command prompt, enabling me to start any program that I have added to the CD myself, ie fdisk, format, etc, etc.
View 3 Replies View RelatedI'm trying to use alien bobs usb wiki to make a bootable usb slack installer. the syslinux part was easy and worked fine but adding the package tree has proved a bit confusing, I was trying to use the cp and mv commands to get the immages from my slack 13 iso but I had stumbled accross a way of using the dd command and can't seem to find the information again.
View 3 Replies View Relatedrecently i had a crush on my computer caused by a power surge, had to reinstall the os since i couldnt boot.
the installation went clean and everything is working very well since but i am having a strange issue with grub - its missing ?
when i boot the computer start with default kernel and no grub menu is visual for me to choose from.
i tried to purge and reinstall grub2 grub-common and grub-pc packages, tried various things found on the grub2 faq pages including booting from livecd and reinstalling.
it appears as grub is installed correctly but its not running at boot ? dunno ?
i'm using ubuntu 10.04.1 LTS x64 on intel E2180 with 2gb ram.
i really dont know what else to try or what can be the cause for this ?
ps: here is fdisk -l
Disk /dev/sda: 123.5 GB, 123522416640 bytes
255 heads, 63 sectors/track, 15017 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I have an image with a autorun.inf file on it and wanted to make it bootable on a simple cd (700Mb). Untill now I tried and failed to make it bootable. The image is on the cd but the cd won't boot.I tried also under windows (with n?r0) and failed again... no way to boot on this cd with the image I created.I need more informations or how toes ^^ to use the "El-Torito" features for the mkisofs utility that I use to create my .iso files
View 3 Replies View Related
