Software :: Geronimo-jetty7-javaee5-2.2 Fails To Deploy War Application Debian Lenny
May 3, 2010
I am trying to deploy a helloworld application of grails in war format which exists.To geronimo web server while deploying it failed and gives following error the username and passwords are the default that come with geromino is it the right way to use or I should do some thing more.GUI based deployement is not possible for me.It is an SSH server where Geromino is running.
System configuration is
[Code]....
View 3 Replies
ADVERTISEMENT
Aug 2, 2010
I'm using debian lenny and I've created a vpn connection (client) to connect to a windows vpn server , my chap-secrets file looks like the following :
Code:
# Secrets for authentication using CHAP
# clientserversecretIP addresses
........
# added by pptpsetup for afa
afa afa "my_pass" *
and my settings for 'afa' vpn connection are :
Code:
# written by pptpsetup
pty "pptp 212.50.246.113 --nolaunchpppd"
lock
noauth
[code]....
View 3 Replies
View Related
Jul 20, 2010
I'm trying to make dual boot system with Lenny (64bit) along with WinXP. I'm using one HDD with 2 partitions and installed first XP then Lenny. Everything seems fine till the first boot after fresh install. Lenny starts to boot and after same point the screen goes blank and then is turned off and that's it...nothing happens. Happens so fast that I'm unable to see the exact messages on the screen. Maybe somewhere around staring anarcon?
PC is:
Athlon64 X2 5400+
Asus M2V-MX motherboard
3GB DDR2 800
500GB WD SATA2 HDD
Radeon x800 GTO video
I reinstalled 2 times and it's the same. WinXP is working fine though but I really don't want it to be my OS...
Another "hint" from today: The same happens when I use "Try without installing" of Ubuntu 10.04(i386) Live CD. It starts loading and at some point turns off the monitor.
Tried also with 8.04(64bit): Boots till it reach something like "Settings sensor limits" and then it's stuck. I have consoles though (Ctrl+Alt+F1/2/3...).
View 14 Replies
View Related
Jan 25, 2010
I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this:
client
dev tun
proto udp
remote openvpn.xxx.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
[Code]...
My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help:[URl].. As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file.
View 1 Replies
View Related
Sep 8, 2010
I have just upgraded my Debian 4.0 box to Debian 5.0. The upgrade is ok and the version of debian is 5.0.6.
Webmin, despite all my efforts, is still displaying 4.0 and when I force it to 5.0 manually, it states: "Warning - Your system is actually running Debian Linux version 4.0."
View 2 Replies
View Related
Sep 10, 2010
I'm in need of a bit of assistance from you Debian users. I have two servers that I thought were identical installations, both running Debian Lenny. Tonight I started the upgrade to Squeeze on both servers and one of them went smooth. The other one started out good but fails on the postconfiguration of openssh-server. I'm getting the following message:
Code:
Setting up openssh-server (1:5.5p1-4) ...
Auto configuration failed
2524:error:0E079065:configuration file routines:DEF_LOAD_BIO:missing equal sign:conf_def.c:366:line 67
invoke-rc.d: initscript ssh, action "restart" failed.
[Code].....
It looks like there's an error in one of the files in openssh-server that prohibits it from installing correctly. However on the other server it all went well.
View 3 Replies
View Related
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Dec 13, 2010
I recently got Ubuntu up running on my HP DV1000 laptop. The problem I started noticing is that whenever I were to install packages via software center or even from the web. They simply won't install. After I enter my password it just hangs and won't continue forward.
View 4 Replies
View Related
Jul 11, 2010
I have Scientific Linux 5.3 (Red Hat 5.1) Application fails to send mail. /var/log/mailog is as follows:
Jul 11 19:05:25 localhost sendmail[4871]: o6BH3hHq004871: from=ciroesposito13@gmail.com, size=25, class=0, nrcpts=1, msgid=<201007111704.o6BH3hHq004871@localhost.localdomain>, proto=SMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1]
Jul 11 19:07:29 localhost sendmail[4875]: o6BH3hHq004871: to=ciroesposito13@libero.it, delay=00:02:39, xdelay=00:02:04, mailer=esmtp, pri=120025, relay=mxlibero3.libero.it. [212.52.84.165], dsn=4.0.0, stat=Deferred: Connection timed out with mxlibero3.libero.it.
[Code].....
View 4 Replies
View Related
Feb 12, 2011
When I try to launch application which runs in another window (not inside shell), it always fails with this kind of message: (example from gnome-terminal)
Code:
** (gnome-terminal:2477): WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported Failed to get the session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Falling back to non-factory mode. Failed to summon the GConf demon; exiting. Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I am running it as root, have GNOME installed and running, and also fresh install of gconf.
View 8 Replies
View Related
Jan 18, 2010
i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
View 3 Replies
View Related
Aug 20, 2010
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies
View Related
Nov 4, 2010
I have added a 10 Mbps network card to my SGI O2 MIPS workstation running Debian Lenny running the 26-2 kernel. The workstation already has an onboard NIC which is working fine.(eth0).
lspci -v shows ths card as:-00:03.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a) Flags: medium devsel, IRQ 18 I/O ports at 1800 [disabled] [size=32] Upon googling I found out that this card is an NE2000 clone. I downloaded the latest 2.6.36 kernel sources and did the following:-
1. Make Menuconfig
2. Loaded an alternate kernel config file (my working kernel config file)
3. In DeviceDrivers->Network device support->Ethernet (10 or 100 Mbit)
I selected ASIX AX88796 as the help associated with this showed it as an NE 2000 clone. configured it to be a module and did make, make_modules and make_install. Edited /etc/Modules to load ax88796 and added an alias eth1 ax88796 to this file. copied the new kernel to the /boot and did a reboot, the machine booted up fine and udev -r showed the 2.6.36 kernel and lsmod showed ax88796 loaded. But, Iam not able to bring up eth1 using:-
ifup eth1
The error messages given are:-
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
View 1 Replies
View Related
Apr 23, 2010
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies
View Related
Aug 28, 2010
Are exist any repository for debian lenny with games like nexuiz vdrift planeshift etc?
View 2 Replies
View Related
Dec 18, 2010
I could't find the 64bit Debian Lenny OS for Intel architecture.Hence I have installed amd64 and it is working fine.Does both intel and amd have the same 64 bit OS amd64 ?
View 3 Replies
View Related
Mar 24, 2010
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies
View Related
May 3, 2010
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies
View Related
Apr 14, 2010
I have read tons of articles on how but none work. I have edited the source.list file with what they say and I have used all the terminal commands that are becoming very repetitive.
View 11 Replies
View Related
Oct 2, 2009
is there a way to auto login as root? login in window preferences won't allow me to select rootPS before anyone starts on the me bad, I'm a programmer using it on a closed embedded system, and need to link to others software, and need to be root
View 6 Replies
View Related
Apr 16, 2010
I installed Debian Lenny on my old IBM thinkpad R40e but i can't change the brightness either with the Fn keys or with the brightness control debian has. i have searched around and it seems to be a problem with linux on IBM thinkpads but i don't know that much about this sort of thing so any help would be appreciated. if you need any more info then just ask.
View 9 Replies
View Related
Aug 31, 2010
Most of the time I rebooting, my resolv.conf is getting updated by resolvconf program, so the network connection cannot be reached. I followed this: Debian User Forums - View topic - Solving DNS problem (dhclient & resolv.conf)
View 7 Replies
View Related
Aug 21, 2009
Could anyone tell me how to get Debian Lenny to automount CDs the same as Ubuntu does i.e. automatically, with a Desktop icon etc.I've worked out how to automount CDs using autofs, which is OK, but it still doesn't seem quite as good as the way Ubuntu does it.
View 6 Replies
View Related
Mar 29, 2011
I have problem with loging, actually iptables logs a data but it seems that for some reasons does not writes in a log file:
Code:
iptables -L -v
Chain INPUT (policy ACCEPT 406 packets, 124K bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT tcp -- any any xxxxxxxxxxx anywhere tcp dpt:xxxx
[Code]....
i checked /var/log/message and /var/log/syslog nothing is here related to iptables. then i create separate file for Iptables by adding this: kern.warning /var/log/iptables.log in my rsyslog.conf it does create iptables.log file inside /var/ but its still empty
View 4 Replies
View Related
Aug 16, 2010
I've found that I need to use pppoeconf, but it doesn't work. I have default Debian kernel with PPPOE module. After looking for the modem it gives me the following message:"Sorry, I scanned 1 interface, but the Access Concentrator of you provider did not respond. Please check your network and modem cables. Another reason for the scan failure may also another pppoe process which controls the modem."pppoeconf detected the interface successfully (eth0, I have only one interface), but doesn't work. It does, however, work with my router connecting without any issues.
View 4 Replies
View Related
Apr 2, 2010
User familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies
View Related
Oct 3, 2010
I have a warfile at /home/myusername/webapps/website.war and the following on /etc/tomcat6/Catalina/localhost:
Code: <Context path="/ROOT" docBase="/home/myusername/webapps/website.war" /> It's not deploying, why?
View 1 Replies
View Related
Jul 1, 2011
I work for an independent school where most of our computers run Windows 7 and Mac OS X. I've started installing Ubuntu (11.04) on some of our older machines, thus introducing Linux to our environment and recycling computers which would otherwise be candidates for the garbage truck. While I am familiar with imaging and deploying Windows and Mac OS, I am lost when it comes to Linux. I have set up a computer with all of the settings and applications that I would like the other computers to have. how can I image that reference machine and then transfer that image onto another PC?
View 9 Replies
View Related
Jan 26, 2011
how to deploy fedora in wds..it for my last final project..
View 8 Replies
View Related
Nov 24, 2009
i use CentOS5.4, i want to deploy VPS on my server. Which technology i can use: OpenVz or Xen?
View 2 Replies
View Related
