Software :: Emerged Tcsh And Ran The Script / CUPS Does Not See The Filter?
Jun 27, 2010
I'm trying to install a Brother MFC425CN printer on my Gentoo system. I have obtained the files needed from Brother and extracted the payload.
The script for creating the filter (endless echos) is a csh script, so I emerged tcsh and ran the script. No luck. CUPS does not see the filter, even though it is present and has the same owner, group, and permissions that work on my other gentoo system.
When I print a test page the log file says
Code:
E [27/Jun/2010:09:36:03 +0800] PID 3912 (/usr/libexec/cups/filter/brlpdwrapperMFC210C) stopped with status 22!
D [27/Jun/2010:09:36:03 +0800] [Job 8] /usr/libexec/cups/filter/brlpdwrapperMFC210C: No such file or directory
It's been too long since I got it working on the other system, and if I made notes they are lost...
View 1 Replies
ADVERTISEMENT
Nov 11, 2010
After it tries to print and nothing happens this shows up stopped. Idle- /usr/lib/cups/filter/footmatic-rip failed.
View 2 Replies
View Related
Aug 3, 2011
For starters, I'll warn you that I installed linux on a pc for the first time yesterday. With the guidance of a pro, I'm running Ubuntu 11.04 desktop 32-bit with CUPS 1.4.6. I have three Samsung ML-2525 USB printers attached. They all three show up with lsusb:
Bus 001 Device 004: ID 04e8:3297 Samsung Electronics Co., Ltd
Bus 001 Device 003: ID 04e8:3297 Samsung Electronics Co., Ltd
Bus 001 Device 002: ID 04e8:3297 Samsung Electronics Co., Ltd
When I go into CUPS, it shows one. I've tried to add another via bash and I can't seem to get that to work either. All three were plugged in when CUPS was started, so I've ruled out that thing where it doesn't see new USB devices. I set up three printers in CUPS (via the web interface) and (no surprise!) they all print to the same printer. I then tried to force them to go to the right places by shutting down CUPS, modifying cups.conf to inculde "FileDevice yes", restarting CUPS and using lpadmin to change the uri's to their /dev/ filedevices. That doesn't work. You probably knew that already, didn't you!?
[code]...
Then the jobs just sit in their queues forever. (I let it sit for 25 hours, they are still "processing").
View 3 Replies
View Related
Feb 24, 2010
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
View 2 Replies
View Related
Feb 26, 2010
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
View 1 Replies
View Related
Feb 27, 2011
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
View 8 Replies
View Related
Feb 24, 2011
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
View 2 Replies
View Related
Mar 22, 2011
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
View 6 Replies
View Related
Jul 23, 2010
I tried to start a tcsh on my Fedora 7 (default shell is bash)
[ss@ssvm ~]$ tcsh
[ss@ssvm ~]$ echo $SHELL
/bin/bash
As you see, another bash shell started.
I looked at the tcsh file:
[ss@ssvm ~]$ ll /bin/tcsh
-rwxr-xr-x 1 root root 345348 2007-02-26 23:58 /bin/tcsh
[ss@ssvm ~]$ ll /bin/csh
lrwxrwxrwx 1 root root 4 2010-03-07 13:13 /bin/csh -> tcsh
It is not a link (but csh is). I don't understand why this is happening.
View 3 Replies
View Related
Apr 1, 2011
I'm so lost it's difficult to even pose my question. My default shell is bash; and I'd like [actually, required to] have the ability to type csh and enter the TC shell...but it's not working at all. All the changes I made to the ~/.bashrc file work great, but I can't seem to access tcsh to see if the commands in my ~/.tcshrc file work.
When I type "csh", my old PS1 [prompt] displays and I have to type "exit" to get back to the one in the bashrc file and then type "bye" to log out off the system.
I've spent the last 3 days researching this, but every article/blog/site discusses permanently changing my log in...NOT going to happen.
View 7 Replies
View Related
Jun 12, 2010
I'm new with linux, and I'm wondering why in order to run executable after compilation I have to type
>"./executableName" I want it to type it just like
>"executableName" (with no "./")
I don't know if this matters but I'm using tcsh for my shell...
View 6 Replies
View Related
Jul 3, 2010
I really like pushd and popd, but I don't like their long spellings, so I made aliases: 'x' runs pushd and 'xx' runs popd. That's not bad, but I wish I could improve them in the following way:
x => If followed by a path, 'pushd' (and cd to) that path. If not given any arguments, run 'popd'.
xx => 'cd -'
The problem is implementing that pushd/popd in one command trick. Since tcsh does not have functions, I've been struggling hard to come with a solution. I made a script, and it works, but it only works within the context of the script. The script exits and not only am I still sitting in the same directory, but also my dirstack is emptied.
A similar problem: make 'cdd'. I remember using that program in DOS a long time ago. I would run 'cdd /path/to/directory' and cd to that path if it existed, or create it and cd to it if it didn't exist. Again, I made a script, but that only works within the context of the script, not my current shell. So the new dir is created, but my shell won't cd into it.
View 1 Replies
View Related
Jul 27, 2010
I have been using tcsh for quite some time, both on a laptop running Ubuntu and a remote server running Slackware 11. No problem whatsoever. Now I am compiling and installing tcsh on a brand new Slackware 13 box and when I run tcsh I get this error:
Unknown colorls variable 'ca'
or
Unknown colorls variable 'hl'
I didn't have this problem in Slackware 11, why is it happening now?
So I tried the official Slackware package for tcsh. It works, but it's tcsh 6.15.00. Tcsh is at 6.17.00, which runs fine on my Slackware 11 box.
I investigated the problem on Google and all reports seem to refer to Fedora, some to Mandriva. Many of the threads, across several forums and sites, point to this LinuxQuestions thread:
[URL]
View 2 Replies
View Related
Feb 12, 2010
I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
View 9 Replies
View Related
Aug 18, 2010
Recently, when we updated our OS, we got a new tcsh feature enabled by default. Whenever I type a command that tcsh doesn't recognize, I get an annoying spelling correction like:
% cats
CORRECT>cast (y|n|e|a)?
I want to disable this feature and allow misspellings to error out like:
% cats
cats: Command not found.
Is my enter key somehow getting re-bound? What could be causing this?
View 1 Replies
View Related
Feb 7, 2011
I just recently installed Ubuntu for our server, and I had a question about using tcsh. I'm trying to run a script of commands and the first line of my script is: Quote: #! /bin/tcsh -f I chmod +x my script, but when I type the name of my script at the command line i get this message: Quote: myscript: Command not found. the only way my script will work is if I type: Quote: tcsh myscript
Only then, will myscript execute its set of commands. I would like to be able to type the name of scripts without having to type tcsh at the beginning, each time. Is there a way to do that?
View 5 Replies
View Related
May 7, 2011
The check on the size of a file I perform in a tcsh script does not work. The size of my file is the following :
ls -l File.gpg
-rw-r--r-- 1 xuo users 3354637392 2011-05-07 15:31 File.gpg
The script is the following :
#!/bin/tcsh -f
set listOfEncryptFiles = `ls *.gpg`
foreach file ($listOfEncryptFiles)
set fileSize = `stat -c %s $file`
echo $fileSize
[Code]....
View 6 Replies
View Related
Aug 11, 2010
Can't seem to use tcsh as my login shell under CentOS 5 as I used to (if I specify /bin/tcsh as my start-up shell, the windowing system doesn't come up), so am logging in under bash then switching to tcsh on top of that, but it won't allow display access from tcsh for my programs. Gives the "cannot connect to display" error that usually xhost + is the solution for, but xhost doesn't help in this case (won't even run under tcsh, says unable to open display "0.0"). $DISPLAY is set in .cshrc. Must be something simple, but can't seem to find a direction to head?
View 2 Replies
View Related
Apr 7, 2010
I need to find TCSH shell and gzip version number by running a acript on several boxes through ssh. How can i do that? I made a script for tcsh but it is not working by ssh , it only works on my box . I dont know from where to find the gzip version info.
View 5 Replies
View Related
Aug 5, 2011
I have written a tcsh script on a Windows 7 machine in order to perform a task on a machine running Fedora. After writing the script, I used cygwin to run it on the Windows 7 machine, and it worked exactly as intended. Then I moved it to the Fedora machine, and I got the following error:
Code:
While: badly formed number
Here is the beginning of the script:
Code:
#!/bin/tcsh -f
##
## Script to automate loading of A2 DAQ systems
##
##
[Code]....
Before the error, I see the string "This program will attempt to automate the DAQ Control process", but not "Please enter the number of the current or most recently completed run: ", so clearly the problem begins at the first "while"
View 3 Replies
View Related
Jun 23, 2011
I want to write script at "tcsh" that send message to user ($DISPLAY) and let him to answer me.below command line that open xterm at any user displayQuote:setenv LESS "P'HIT q TO QUIT'"/usr/bin/xterm -display $USER_DISPLAY -geometry 60x7 +sb -rv -e less ./MESSAGE_FILEpressing "q" will close the window.there is any way to press "r" ->
new window will open ->user write a feedback ->message will send back to sender.
View 11 Replies
View Related
Jan 21, 2010
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
View 13 Replies
View Related
Mar 14, 2010
I want to change my default shell to tcsh. I used
Code:
usermod -s /bin/tcsh username
command as given at url
But if I open a new shell, it is still a bash shell.
How do I make my default shell as tcsh?
View 6 Replies
View Related
Apr 3, 2009
It seems that rpm in CentOS has a filter to change the phrase "Red Hat" to CentOS
I understand why such a filter exists - but here's the problem -
From the EPEL rhnlib package, when viewing with rpm -qi -
Description : rhnlib is a collection of python modules used by the CentOS Network [url] software.
That gives an incorrect impression that [url] is a CentOS web site.
Package - rhnlib-2.5.10-1.el5 from EPEL
If you download the src.rpm from EPEL and view it with rpm -qip you get the filtered description, but when you install the src.rpm and look at the spec file, it clearly says CentOS.
I think you meant Red Hat. - pschaff
Perhaps instead of filtering the displayed meta data, the CentOS build system could do the filtering before the spec is built?
That way packages that are not built by CentOS will not be impacted, and cases in CentOS where the filter isn't appropriate could be handled by a list of package names that shouldn't be filtered.
Should I file this as a bug with rpm or is this sufficient?
View 8 Replies
View Related
Sep 3, 2011
I'm a KDE fan, but I installed GNOME 3 to give it a test drive. I like some aspects, but I don't care for all the clutter in the menu, in the form of KDE apps that duplicate the functions of native GNOME apps. So I just opened alacarte and un-checked all those KDE apps. Simple, cleaned up the menu beautifully. Then I booted into my main environment, right-clicked on my launcher to open its editor and delete the GNOME apps. All of my KDE apps were gone!
Deleting GNOME apps from KDE works fine: They stay gone in KDE but they're still present in GNOME. The reverse is not true. Is there a better way than what I tried? Besides installing a GNOME distro in a vbox; I tried that and found it too sluggish. I could also replicate a menu structure on a dock (Cairo), but I thought I'd check with the experts first in case there's a less clunky approach.
View 9 Replies
View Related
Jan 15, 2011
I wonder how I can filter the syslog? i.e. there is a message that I don't want to see logged in there etc?
View 3 Replies
View Related
Apr 9, 2009
I am using Mailman to create a mailing list for my company. Our membership database is stored in a MS SQL 2000 server. I have figuired out how to write a batch script to export my email address into a text file.
The file is formatted as so:
Code:
Mailman sync_members scripts needs only email address. How can i use sed and/or awk to filter this file and leave me with just the addresses.
I need a file with each email address, 1 per line. Blank lines are ok.
View 3 Replies
View Related
Apr 28, 2011
I have open ports on my computer for vsftpd, pptpd, and I need help to filter this ports because they aper as open ports on internet, and this is pretty risky
View 3 Replies
View Related
May 15, 2011
I want to install l7-filter application on my opensuse 11.3 . I couldn't install it alone according to this guide :
Layer 7 Userspace HOWTO
the download link is :
Linux layer 7 packet classifier - Browse Files at SourceForge.net
View 1 Replies
View Related
Sep 8, 2010
I want to backup my installed packages using this method mentioned in thread [URL] but the problem is I have 31 broken parkages, i want a way to know the broken parkages so I would remove them in my repack so when i restore the parkages I wont have broken parkages. For now i cant fix them as I dont have internet....
View 5 Replies
View Related
