Software :: Cwrsyc: Minimal Test Fails On Change_dir
Dec 4, 2010
This is cross-posted from the cwrsync forum. cwrsync is an integrated package of minimal Cygwin with rsync.
A minimal test case, based on the as-distrubuted cwrsync.cmd, fails with "rsync: change_dir ... No such file or directory (2)". The listed directory looks strange.
The sample cwrsync.cmd was modified only by adding this line at the end:
Code:
rsync --verbose /cygdrive/c/WINDOWS/system32/drivers/etc CW8vWXP@10.0.2.2::CW8vWXP
The full error message (my bolding) is:
Code:
rsync: change_dir "/cygdrive/c/Program Files/cwRsync//cygdrive/c/WINDOWS/system32/drivers" failed: No such file or directory (2)
[Code].....
View 2 Replies
ADVERTISEMENT
Aug 9, 2010
When running yum update, I've been getting this:
Quote:
View 8 Replies
View Related
Oct 2, 2010
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out "ERROR: Message not sent.
View 5 Replies
View Related
Feb 17, 2010
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
[Code]...
View 6 Replies
View Related
May 6, 2011
I've seen this happening to others, but can't find the original bug report I saw. From what I can tell I'm getting the error because I am using a local mirror, as others have successfully updated using "official" mirrors.
What would cause the installer to differentiate between a local and an official mirror? I'm pulling everything anl.gov has for Lucid, Maverick, and Natty, and had no problems using the local mirror to dist-upgrade from 10.04 to 10.10.
The exact error is:
Code:
After your package information was updated the essential package 'ubuntu-minimal' can not be found anymore.
This indicates a serious error, please report this bug against the 'update- anager' package and include the files in /var/log/dist-upgrade/ in the bug report. main.log from /var/log/dist-upgrade:
Code:
2011-05-06 10:15:06,986 DEBUG running doUpdate() (showErrors=True)
2011-05-06 10:15:07,582 DEBUG openCache()
2011-05-06 10:15:07,582 DEBUG failed to SystemUnLock() (E:Not locked)
2011-05-06 10:15:08,032 DEBUG /openCache(), new cache size 1444
[Code]....
View 3 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Oct 2, 2010
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out (ERROR:Message not sent. Server replied: ). I apologize for not going directly to the qmailrocks forum, but they are currently closed down (due to lack of funds). I also am a newbie, so I apologize for the lack of needed information. If anyone has any ideas, please let me know what information you would need.
View 2 Replies
View Related
Apr 8, 2009
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
View 1 Replies
View Related
Mar 15, 2010
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
View 1 Replies
View Related
Mar 26, 2011
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies
View Related
Mar 29, 2010
I have a 14TB raid, file system is read-only and I am trying to run e2fsck -B -p -C -v -y /dev/sdb1, it goes through, but fails and says bad block/inode or fails to transfer, something like that.Is there a way I can get this to run successful, this is a production storage server, its critical.
View 13 Replies
View Related
Jul 7, 2011
Can i used Yum in a minimal installation ?
View 6 Replies
View Related
Mar 29, 2010
Ubuntu minimal install with Xfce, in a kinda old computer, I would like to update to 10.04 when it's out, what kind of considerations I need to take? I would prefer to avoid to have to build the system again
View 4 Replies
View Related
Feb 23, 2011
I installed Ubuntu using Wubi, but I've found it comes with a lot of stuff I don't need, like gedit, brasero, and all the games. Is there a way to install a completely minimal version of Ubuntu, and just install what I need as I go?
View 2 Replies
View Related
Oct 13, 2010
I am running Debian testing with KDE via KVM.
I love GNOME to pieces but I also enjoy KDE, and I decided to try Debian with KDE. It was a positive experience but a pain in the rear to set up. I installed KDE, and then had to manually remove most GTK packages, as I had installed KDE-full and was overloaded with KDE and GNOME apps.
I would like to do a minimal, CLI-only installation of Debian testing and then install KDE. My machine accesses internet via wireless, which I read the Debian installer does not support. I'm assuming I will have to go with a netinstall...?
Furthermore, once I attain this CLI-only environment, how difficult will it be to get my hands on KDE? A simple apt-get install kde-full ?
View 3 Replies
View Related
Apr 12, 2010
I use CentOS as a host for VMWare virtual machines. I like the CentOS install to be as minimal as possible. However, if I try to remove stuff I don't want at the install stage, the install invariably crashes. So I just accept the defaults, and it works fine.
So I would like to know the best way to get rid all the stuff I don't want (which is pretty well everything except Gnome, vi, samba and an email reader).
View 8 Replies
View Related
Mar 16, 2016
Recently I tried to install Debian 8.3 from *netinst.iso as a VM on VmWare Worksation 12. I try this in my office where there is a windows proxy set, for some security measures. During the installation in order to download updated and install additional packages I need to choose a mirror and then a proxy. I try to set the proxy but all I receive was an error. Decide to continue with the minimal installation and when the system start just to enter the proxy in etc/profile the reboot and I was thinking that everything will work just fine and I will be able to install everything I need. When I try apt-get install I receive a message Ign cdrom:// Debian ... Then to remove that error I edit /etc/apt/source.list but even then nothing happened when I try to use apt-get install. I receive and error message "Unable to locate the package.
View 5 Replies
View Related
May 1, 2010
I run a saned daemon on an Ubuntu 9.10 server, and use xsane clients on other machines. Does anyone know a secure way to open up the server's firewall to allow access to a scanner? I'm looking for the minimum amount of ports I can open up.
I tried "sudo ufw allow from 10.1.1.0/24 to any port saned", but this doesn't work. I'm guessing xsane needs to hit some more ports on the server or something.
View 2 Replies
View Related
Jul 4, 2010
I would like to know if there is a way to install Ubuntu 8.04 with a minimal configuration. Just the desktop and the important programs needed to run/update ubuntu. I'm asking this for my current problem found in this thread URL... hasn't been solved yet, and if the said problem doesn't get solved I would have to downgrade to 8.04 for this is the only version of ubuntu that works with the monitor described in the linked thread. Also, I would like to know if there is a way of installing fonts in 8.04 as easy as adding fonts to 10.04?
View 2 Replies
View Related
Jun 12, 2011
what I do I can't seem to be able to USB boot the minimal image of Ubuntu. No matter what program I use (Ubootnetin/Universal USB Installer/Etc) I always get a blank screen when selecting anything from the menu Install/Command-line Install)
View 1 Replies
View Related
Sep 1, 2011
how do you USB boot the minimal Ubuntu image? I did find a tutorial but it was very brief and was for a much older version of Ubuntu.
View 3 Replies
View Related
Mar 30, 2010
could some one give hints tips ideas on how can we install centos 128 mb ram machine with minimal GUI, lowest graphics mode. what are main package i do need to remove it.
View 5 Replies
View Related
Aug 23, 2010
I'd like to download an iso file for a cd to be used like my win98se backup diskette. I would need command line, fdisk, mkfs, mkdir, mount, unmount, tar. Want to use it to backup fedora 12. Have clonezille - know of dd - neither quite what I want. Best if it is a relative of fedora so it makes appropriate assumptions - good if it is small to minimize download time.
View 5 Replies
View Related
Jan 11, 2010
I'm running Ubuntu 7.04 server on a low spec spare machine ( 500MHz, 128 RAM) but fancy a change. Basically would like a non-GUI, command line only interface, running SSH, Samba and a flavor of FTP. FTP must be set up so users only have access to their home directory and not to any other system dirs. In addition I may want to incorporate anonymous ftp login at some point. Any recommendations for both FTP and minimal server software ?
View 7 Replies
View Related
Jul 12, 2011
A few days ago I tried to install Ubuntu 11.04 minimal CD 64 bit PC (amd64, x86_64), from [URL], but couldn't. The reason is that none of the Ubuntu mirrors were accepted. I don't know if the problem is that the laptop isn't 64-bit, I'll list the specs, or what and I don't want to burned another disk without advice on what to do.
The laptop's specs are:
Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (2 CPUs), ~1.8GHz
Operating System: Windows Vista Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.101014-0432)
System Model: HP Pavilion dv6500 Notebook PC
BIOS: PhoenixBIOS 4.0 Release 6.1
View 11 Replies
View Related
Aug 20, 2010
I want to know which packages from "x" set (slack 13,.1) have to be installed for X server to work. Requirements are really minimalistic. Only English language, no X development, no hardware acceleration, etc.
View 6 Replies
View Related
Jan 15, 2010
I basically just want to be able to run XFree86 on one of my clients and have networking support. Does anyone know what packages I need to add in my ks.cfg to meet this requirement?
View 4 Replies
View Related
Nov 1, 2014
I have recently acquired a micro-sized-PC (A Dell FX130) which comes with a VIA C7 processor, 1GB RAM and 1GB onboard flash. The only application I need is a web-browser, I will use the FX130 to access a (very limited) number of web applications and to download/print-html-to-PDF - putting files onto a USB thumb-drive. I want to encrypt the disk to guard against tampering, and to run a restrictive firewall.
When I try to install the i386 debian-7.7.0 image - I run into the snag that it won't let me use guided configuration for the 1GB flash drive... and - when I guess at a sensible partitioning... I find that I run out of space during the standard installs. I note, however, that a whole bunch of significant applications (which I don't need) are being installed.
I am sure I'm missing something - is there an easy way to do a "minimal" GUI install that would make it easy to fit (just) a web browser (Chrome - ideally) and dependencies onto a 1GB bootable flash drive in a 'Debian-standard' fashion?
View 14 Replies
View Related
Sep 1, 2010
I am using the Debian stock kernel. I want a minimal kernel that works on my Pentium 4, 1GB DDR RAM machine. What do I have do to get a less resource hungry OS. Is there already a minimal kernel binary available?
View 2 Replies
View Related
Nov 4, 2010
What happened to kde-core? I have two choices of bloat, kde-standard or kde-full. I don't want stuff like konqueror or kmail. I don't want Gwenview, Okular, or Ksnapshot. I don't care for all the media players. I don't need Kaddressbook or Korganizer. Is there a way to do a normal, minimalistic install without this stuff or am I screwed? I want to reinstall on my laptop and the boss' laptop and would prefer not to have the extras,
View 6 Replies
View Related
