Software :: Change MPD Output To Recognized USB DAC?
Jul 22, 2010
However I just added a new DAC that my system does recognize and will play music through (sound player in ubuntu and system sounds are now outputting to it just fine), but I cannot figure out how/where to specify that ampache/mpd use the DAC. ampache/mpd is still outputting the sound out of the soundcard line out successfully. i went into ubuntu's graphical sound config and turned off the soundcard and set the usb dac as default and hat seems to work fine for everything as I said.. except what i really want it to work on: ampache
(its a usb device: nuforce icon)
Using Ampache v 3.5.4
mpd 0.15.4
ubuntu 10.04 LTS
been pouring through docs/web for hours with no luck. theres no enough clear docs on mpd to figure this out. i don;t know how to configure an audio output that sends to this particular device.
View 1 Replies
ADVERTISEMENT
Feb 4, 2011
I've been getting the hang of ubuntu. It's been a good switch from windows 7.
I'm having a bit of an issue which right now is causing me to regret deleting my windows partition. It'd be nice to have my dual boot set up right now.
Ubuntu is not recognizing my headphone output on my laptop.
I've been looking around but can't find a fix. Here's my alsa info script output.
Also, I'm running 64-bit ubuntu if that matters.
[URL]
View 8 Replies
View Related
Feb 11, 2011
Sound used to work fine on my computer, but one day my headphone jack stopped working -- when I tried to use it, no sound played through the headphones but did play through the computer's speakers.After I tried to fix it, I lost ALL sound on my computer. I noticed in my sound preferences it says "Dummy Output" and no other hardware.The problem seems common -- I've Googled the issue to death and read many threads here about the same problem -- but no matter how many times I've tried, I can't find a solution that works for me.I'm relatively new to Ubuntu and so there's still a great deal of stuff that
View 1 Replies
View Related
Dec 26, 2010
I finally decided to transition to a 64-bit install (AMD64). (same machine, just reinstalling as a 64-bit kernel starting w/ a Debian squeeze netinstall image) My audio chipset is nvidia MCP61, and it was working perfectly under a 32-bit kernel (I did the transition because a poorly-written system backup script (my fault) hosed /usr, /bin, and /sbin) When everything was up and running:
*: KDE4 only recognized the output device as ALC1200 Analog
*: kmix only had a single channel(master)
*: alsamixergui did recognize all the channels
*: some games (sauerbraten, for example) had no sound in KDE4.
*: some games (warzone2100, for example) did have sound in KDE4.
*: the games that had no sound in KDE4 did have sound in fluxbox.
I removed the following packages (some of which I had installed to try to get audio working properly):
[Code]....
View 2 Replies
View Related
Oct 30, 2010
clear
echo -n "enter ur birth year "
read byear
cyear='date | tr -s ''| cut -d "" -f 6'
age='expr $cyear - $byear'
echo "ur $age"
View 2 Replies
View Related
Feb 19, 2011
A few hours ago, my Ubuntu, for no apparent reason stopped sending proper signals to my monitor. I last updated Ubuntu about a week ago and since then I haven't had any problems until now so I believe that an update couldn't have caused this. Anyway, when I boot up, I see the purple boot up screen for just an instant and then the monitor displays a 'bad-input' message. There's nothing wrong with the monitor.
I have an ATI graphics card. (I tried switching to the Ctrl+Fx terminals.. didn't work). This is about the third time I've had serious issues with Ubuntu and I'm getting a bit frustrated with it.
View 3 Replies
View Related
Feb 3, 2010
I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?
View 1 Replies
View Related
Sep 5, 2009
I was wondering about the differences between "$PWD" '$PWD' `$PWD`. Basically I just don't understand exactly how '' "" `` change the output of the command.
View 1 Replies
View Related
Jul 11, 2011
how do you change the default audio output device if you have multiple sound cards?
View 14 Replies
View Related
Jun 25, 2011
I want to change the default sound output volume to be high than it normally is when the system starts.
How can i change it?
View 2 Replies
View Related
Jun 5, 2009
When in the interactive envirment, my Input and Output are all mess-up. So i want to color the Input and Output with two different colors.. so i can figure them out..
View 1 Replies
View Related
Jun 15, 2010
I have a ubuntu server running on a ten year old desktop and it runs great but i cant seem to change the video out put away from the normal anolog port to a TY port.My server is just for home use and I do not know the terminalThe reason I need to move to the other port is I do not have a screen for it but I do have a little old TV that will work.
View 2 Replies
View Related
Sep 12, 2010
I want to create a small simple application that will let me change the Output of the Sounds option to go from speakers to my headphones. I can do this easily enough through System --> Preferences --> Sound, but I'd like to create a GUI front end for me to do this. This is more as a learning exercise than anything else.What is the best language for me to build the windows to do this? Also, how do I find the commands to let me toggle the sound settings? Where are they documented? I'm using Ubuntu 10.04.
View 2 Replies
View Related
Sep 18, 2014
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
View 0 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Mar 27, 2010
I was installing DYMOUM from [url]. "make" command is issuing this error:
Code:
Prior to this, ns-2.34 was working fine. Patches are applied very well.
I am in under fedora 9 and:
Code:
View 9 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Jul 22, 2009
I'm trying to cross-compile glibc 2.2.3 for PowerPC 405 using ELDK 3.0 on a x86_64 machine.
I have unzipped glibc-2.2.3 in a temp directory and configured using:
The configuration seems to run fine but when I do make I get the following error:
This is the error in the config.log file:
I have installed the libgd package using apt-get install libgd2-xpm-dev and I also tried recompiling using libgd2-noxpm-dev package but I still get the same error.
View 2 Replies
View Related
Apr 29, 2010
I cant seem to get the sound working and when I click on perference then sounds and go to the output selection it has only dummy output as a option.
View 3 Replies
View Related
Mar 7, 2010
I installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies
View Related
Jan 25, 2011
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
View 3 Replies
View Related
Jan 6, 2011
I am sure that this is very simple but I have installed sound juicer and the gstreamer plug ins. The problem is i still cannot select MP3 as an output output option
View 3 Replies
View Related
Jul 19, 2011
I don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
View 7 Replies
View Related
Mar 27, 2010
I finally got audio working on my ubuntu 9.10 desktop... now I am having sound issues watching movies from a network share.The sound device continually randomly changes to "dummy output device" and then there is no sound output. The sound icon dissapears on the toolbar. To get it back and audio to start working I have to $sudo alsa force-reloadIt seems to happen everytime there is a network delay, the movie will stop for a second and then when it plays the sound is gone
View 1 Replies
View Related
Mar 4, 2011
Is possible to have two identical sound card outputs? For example, is I want to use two headphones at the same time.
View 6 Replies
View Related
Jan 22, 2011
I'm still trying to find out if my coby mp3 player will actually play mtv video files as is advertised.
ffmpeg -formats does list mtv but the only command I really ever used was one to convert a vid to an mp3 so I tried Code: ffmpeg -i test.mp4 -acodec copy output.mtv it returns Code: Unable to find a suitable output format for 'output.mtv' I can't find any mtv files online for purchase or free for that matter, so I know this is all pretty obscure but shouldn't there be a way to convert them since ffmpeg lists mtv format?
View 6 Replies
View Related
Aug 16, 2010
I'm using Ubuntu with GNOME and alt+tab for switching windows does not work for me. I checked the system prefs & the keyboard shortcut was correct set.
I even tried changing the key to something else (that doesn't contain alt). It didn't work either. It appears as if the manager didn't recognize the shortcut & the key strokes were passed through to the current application. Rebooting didn't help either. Note that I can do alt+f5, alt+space. alt+f2 didn't work though.
View 5 Replies
View Related
Mar 5, 2011
I have been trying to make my USB flash drive mount for a while now going through most of the forums i could find. I've got it working to the point that if i restart with the flash drive in the USB port it will recognize it upon startup, but if i remove it and try to put it back in....nothing. I have the cheap Acer Aspire One, 1 GB ram etc. even if i go into disk utility and try to mount it it wont work, and i get this error message,
Error mounting: mount exited with exit code 1: helper failed with:
mount: according to mtab, /dev/sda1 is already mounted on /
mount failed
which from the little research i have done my computer wants to mount my sdb1 onto sda1 which is my hard drive. i've tried the usb stick in all the ports, nothing changes. it works fine in my windows xp computer. my camera is accepted as well as my mp3 player (although this has just recently started to work...
View 4 Replies
View Related
Dec 22, 2010
I tried to install Ubuntu UE, while installing due to less space on my pc hard drive i used external USB (400GB) hard disk for file system, i have selected ext4 file system and 100GB space in disk partition menu, after selecting and start to partition option, i remembered that USB hard disk is already contains 300GB of data which is very important. So I canceled the Ubuntu initialization activity with in 10 second.
The problem is now , iam not able to see my data and the USB hard disk is also not getting recognized in windows PC .Is there is any way to retrieve my data.
View 2 Replies
View Related
Jul 9, 2010
I have set up a new Gateway DX4820 with Windows 7 to dual boot in Ubuntu 10.04 Windows shows it as having a Core 2 Quad Q8300 at 2.5 Ghz which meets the store specs but the system monitor in Ubuntu shows it as having 2.9 Ghz of ram.
View 5 Replies
View Related
