any1 have simple program which run avgstats.awk succuessfully? coz i cannot obtain any result when i run avgstats.awk. it shows
####################################################################
# Warning: no packets were received, simulation may be too short #
####################################################################
flowID: 0
flowType:
srcNode1: 0
srcNode2: 0
[Code].....
My first installation of RedHat was in 1996 , version 3, then I switched to Mandrake because they supported the hardware I had at that time. Now I am a little worried about the direction Mandriva has taken lately so need to reconsider RedHat. I was hoping to buy the distribution on a disk medium but the main site seems to be addressed to the business community not home users like me. Downloading is not attractive so I wondered if it was possible to buy a boxed set of Fedora or RedHat for a home user.
View 3 Replies View RelatedI just installed ubuntu 10.10 on my laptop Dell Inspiron 1525. Wireless internet is not working. I installed wicd network manager and I am able to see the available wireless networks. My wireless connection is encrypted. I have tried all encrypted options with the key but no avail. It says "Cannot obtain an IP address" after validating authentication.
View 4 Replies View RelatedIn other UNIX-like OS I can go to an rc file (like kdmrc) and find the line "Allow root access at login=no" and change it to yes. How would I do this in Fedora-12, or what do I need to do to obtain permanent root accessed including with-in the GUI and not just at the command-line. I use only GNOME for Fedora-12
View 1 Replies View RelatedBeen a ubuntu user for almost a year. I've decided to branch out and install fedora on my other laptop.
Currently I'm trying to create a bootable usb using this guide:[url]
Using rpm to check for livecd-tools tells me it's not installed.
I tried to get it through apt-get install livecd-tools. But that didn't find anything.
I tried installing yum and to obtain it but to no avail. Same error as apt, "Not available".
I have just installed Fedora 15 on my laptop, Now i am trying to install some programs like .... skype, drivers to my printer etc but i get this message: Failed to obtain authentication.... when the installer is trying to solve dependensies...
I have tried to log in as su but i cant that ether due to fail password or username... that is the message i get at the log inn screen.
I have an Ubuntu server running behind a router and I generally manage it from a remote location. I ran into a problem today when I changed the subdomain that the router is on and in turn changed all of the ip addresses for everything on the local network. After restarting the router, I can no longer access the Ubuntu server.
I made sure that I changed the port forwarding settings to reflect the changes in ip addresses. Also the router does not even show the Ubuntu server as having an ip address issued to it. So from that I guess that the server never requested for a new ip after the router restarted. I think I've had this problem before and I ended up restarting the entire server manually. I know that if I restart it, everything should be back to normal. That's what I'll have to end up doing, but I wanted to avoid having this problem in the future, so I was wondering if there is any way to set up the server so that it requests for a new ip address automatically.
how we can obtain cache hit ratio? I have tried using "sar -b" but couldn't find the info there.
View 7 Replies View RelatedI am running UBUNTU / Windows Dual Boot on a HP Pavillion computer. My problem is that on the windows side I have lost sound and internet ( Via Ethernet ). Everything works fine in UBUNTU. So I guess I need to reinstall Ethernet and Sound drivers. Problem is how do I establish what drivers I need - Ethernet card , and Sound card.
View 2 Replies View RelatedWhere can I obtain the source code for Ubuntu 10.04.1 LTS?
View 1 Replies View RelatedI just been given a project to compile code to run under Red Hat Enterprise Desktop 5.3.
Does anyone know if Red Hat sells older versions of Red Hat Enterprise Desktop? RHEL 6 was just released last month. As I understand it, code compiled under RHEL 6 will probably not work under 5.3 due to difference in glibc.
Can I compile code using a Fedora distribution and run the code under Red Hat Enterprise Desktop 5.3 without recompiling the code? If so, does Fedora offer older versions of their distribution?
But i can under an alternate profile. Running ubuntu 10.04 and cannot seem to pin point the problem. When I was doing some looking into it, it appeared that the wpa-supplicant.conf wasn't where the man page indicated it should be. ie /etc/, but then it wouldn't or shouldn't work for the other profile either, right? i tried to post this before but i couldn't find it anywhere.
View 3 Replies View RelatedI have the fedora 13 installed on my pc, but I have chroot debian in my NAS arm. My question is for NAS, but is the same for only linux generally. Regarding NAS, some packets are old, because there are not binaries for latest version for a software. But I can install latest software from source configure, make, make install etc... In the case of NAS, this process goes for many hours like 12hours or more.
In order to avoid the same process again in the case of a clean install of chroot debian, or to configure 2-3 NASes that I have, how can I "backup" the software that other times fast install.
I have obtained zImage from uImage by using this script http://buffalo.nas-central.org/wiki/...ract_an_uImage
Then I used the zlib library from www.zlib.net and the accompanying zpipe.c file to uncompress zImage but I am getting this error
zpipe: invalid or incomplete deflate data
Am I on the right path? My aim is to obtain completely uncompressed Image.
Whats the easyest way to obtain F11 Live-Cd or the 1 to 6 *.iso images.
View 7 Replies View RelatedI'm running 64 bit openSUSE 11.4 with KDE. I would like to install Wi Fi Radar. where I can obtain the RPM for it? I have looked but can only find older versions of it for older versions of SUSE..
View 5 Replies View RelatedI have a home WiFi network that has been working fine for ages, which currently supports two Windows-based laptops and a WM5 smartphone. They all connect to the WiFi router (Linksys WRT54G) which in turn connects to the ADSL modem (Huawei MT882). The router is configured with a WEP key, the SSID is not being broadcast, and all MAC addresses must be whitelisted. I try to follow good wireless network security practice. I also have NAT running between the router and the modem.
Everything is working fine for the Windows clients, and now I am trying to add my Linux box to the mix. I am setting up an older HP Pavilion 510a desktop with Ubuntu v8.04LTS, using a Realtek RTL8185 WLAN card. The machine has an onboard RTL8139 LAN adaptor also, which works fine when I plug it in directly to an ethernet port on the wireless router. The WLAN, however, does not seem to be getting a DHCP packet, and keeps on autoconfiguring with a 169.254.x.x address. When I try giving it a static IP address it doesn't connect either.
As you can see from the screenshots below, the WLAN is working fine. I have it installed using the ndiswrapper and Windows drivers. I've been through the Comprehensive ndiswrapper troubleshooting guide but that did not resolve my problem.
I configured the network myself, and it works perfectly for my Windows machines. It is just my lack of experience with Linux which is preventing me from getting the wireless to work under Linux. I can get a HDCP packet in Linux when I am connected to the LAN using the RTL8139 adaptor, but not on the WLAN using the RTL8185 adaptor.
I just got a AWUS036H Alfa Network Adapter but there's like 10 folders on teh CD that it comes with, and there's read me's in about all 10 of'em, i have no damn idea which one to install. I went ahead and just did ifconfig wlan1 up and brought the interface up, went to wicd network manager and added wlan1 to wireless adapter
when i try connecting to my wireless router, it says resetting Ip ddress, something else with the configuration file, then obtaining IP address... it just hangs there for about 2-3 minutes and gives me an error... anyone else know how to set up this adapter?
Where can i obtain a full command list?
View 8 Replies View RelatedI am unable to obtain a blank CD-R to burn the ISO. I have it installed through WUBI but due to the size restriction to 30Gig it makes it completely useless to me. I gave my CD away that I got free from shipit and they wont let me get a new one. I have an external HD formatted to NTFS with files on it that I can't lose, they are very important. I might buy a disk later but right now my funds are tight due to bills and such. I use Ubuntu more than Windows, actually Windows is pretty much never used on this machine and due to issues with it I am unable to use it.
View 3 Replies View RelatedLets say that I want to compile a program that is in the unstable repository and I have testing (or also if I am using stable and want to compile something from testing), I know that I have to put the deb-src repository line of the repository from which I want to obtain the build dependencies by ussing apt-get build-dep packagename but my question is: what if it's not in the repositories at all? How does one go about obtaining these dependencies?
I don't know much about this topic but I know how to use dh-make with dh_make --createorig and I also know how to do dpkg-buildpackage but not more than that.
I installed PCLOS 2010.07 into my laptop and dual booting with windows vista. Now I got a weird problem that is when I connected linux to my wifi router, it cannot obtain IP! (it still work correctly in windows, problem just with linux) I had to manually set ip and that worked. Now i wonder what is happening, because I didn't see this problem with PCLOS 2009 borrowed from my friend few months ago.
View 4 Replies View RelatedI needed to get a wireless adapter for my desktop PC so I went to newegg and looked around to see what PCI-E cards they had available. I came across a Encore one that uses the realtek 8192CE chipset. I confirmed before I bought it that it is supported in the kernel as of version 2.6.38. I am running Slackware 13.37 and I compiled a new 2.6.39.1 kernel and after I rebooted the kernel I checked lsmod,iwconfig, and ifconfig and confirmed that all the correct modules are loaded and the card is recognized by both iwconfig and ifconfig. At first Wicd acted as if there was no card in the system so I checked dmesg and found that I was missing the firmware for the drivers. I went to the realtek sight and downloaded the drivers from there and got the firmware and copied it to /lib/firmware/rtlwifi and now wicd recognized the card and finds my networks. But whenever I try to connect to my network I get an error saying "Can't obtain IP address". I have googled around and can't find any clues on this. The only thing I have noticed is that the activity LED is not working which leads me to believe the card is either turned off/or not powered on. The light works fine in Windows 7. The network I am connecting also uses WEP. I am having no trouble connecting in Windows so I know the card works.
View 5 Replies View RelatedI have installed fedora10 on my system. I have given root pasword before the installation,and also normal user password after installation. I am not able to login a root user,but can login as normaluser.
I tried " chmod -u - root"
It have given reply as "chmod:no changes"
i seem to encounter lots of little troubles here and there... just need to get used to it.
now i`ve downloaded skype for opensuse and when i dbl click on it, it says: "you have failed to provide correct authentication please check any password or account settings" but it doesnt ask me anything before the error..
I have a Norton Ghost .gho file, and basicly I want to extract the raw image out of this, for example to use with with tools like dd. (So using any symantec/windows tools is not an option). Is there any open source tool which can deal with these .gho files ?
(Note: the.gho file I'm using is a sector based one, and not a file-based one, which implies that things such as Ghost explorer won't work either (see this page)
I am having a persistent problem with getting a wired network connection under a recent install of Ubuntu 9.10. The network manager will show the wired network as 'disconnected' after a restart. This is true whether I am connected directly to my ISP's modem, or through the Linksys router that I usually use.The output of ifconfig suggests that eth0 is not being assigned an IP address:Code:I have reached the limits of my own ingenuity.
View 9 Replies View RelatedI have router and wireless card Linksys. Driver are installed correctly for wireless card.
Using WifiRadar I can see the access point is detected.
DHCP woks perfectly for wired lan.
However when I try to connect to the detected access point the ip addres is never retrieved and the connection never established.
I tried most of he basic instructions posted on ubuntu forums, but the problem doesn't seem to be with basic configuration: driver, essid, wep key, etc..
The problem seems to be with DHCP not able to retrieve an IP address from the DHCP server of the router. Of course the router works file with other laptops (windows based) that have wireless card.
I also tried the Network Connections setup part of ubuntu. That one shows the access point by its essid name in the list of wireless network, but when I try to connect it takes sometime and eventually asks for the wep key, which I provide and then it times out and keep asking it. The same wep key works for other pcs.
Can't figure it out. I am using ubuntu 9.10.
Some more details are the following:
1) Here the output from the log file: /var/log/wifi-radar.log
Of course it is set ... and dhcp client works for wired lan anyway.
2) diego@mysuperlaptop:/var/run$ sudo iwlist wlan0 scan [sudo] password for diego:
I tried everything I could think about in the UI windows setting (WifiRadar and Wireless Network Connections) a well in the config files from the shell. I just don't get what the deal is. I am pretty sure it is a DHCP issue but can't figure out what.
Linksys router and an acer aspire one. I have updated to the 9.10 netbook remix and the laptop associates with the router but will not pickup dhcp. If I specify an address then the machine looks like its connected but will not go to a website. I manually inserted dns but still nothing. So I updated to
linux-backports-modules-karmic-generic
linux-backports-modules-wireless-karmic-generic
Still will not use DHCP , I to am using ethernet at the moment. It was working before the update.
I believe I have the wireless card installed properly and wicd sees the router. When I try to connect I get an error "can not obtain IP address" Output from iwcongif and lspci is.
dillan@dillan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....