recently i just installed nagiosgraph, however i can only see the graphs for SWAP & PING. I have enabled the perfdata in my check_cpu script.
However, nagiosgraph still does not display CPU as a service in the service drop down list.
Must i do any further steps to display it as a service in nagiosgraph ?
I'm trying to install NagiosGraph for the first time. I have downloaded nagiosgraph 1.4.4, un tar'd and run the "install.pl --check-prereq" command. Everything comes back just fine except the line
Quote:
RRDs... ***FAIL***
I have downloaded and installed RRDTool 1.4.5, it compiled, installed and tested by generating the stripes.png file. What is NagiosGraph looking for? I don't know where to turn at this point.
So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies View RelatedHow can Vsftpd services & Xinetd.d services can be differentiated?
View 5 Replies View RelatedI can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.
View 9 Replies View RelatedI am running ubuntu 9.10 with the latest patches and all the prerelase patches. At some point and i am not sure when something broke and none off the services start during the boot. Also the virtual consoles do not start. The only services that start are the one that are controlled by the gnome session. In addition i cannot start the rescue mode. It stops loading at same point where the console should show up. I am guessing that the problem is related to the upstart but i am not sure. I never ever had problems with boot in linux and this is very frustrating. I feel like i am running windows and dont know how to troubleshoot. I cannot see anything in the log that would give me a hint? I dont know where too look. I tried to activate the bootlogd but it does not work. Probably beacause the services dont start correctly. Something broke and one of the updates must changed something but i dont know what and where? Anyone can recommend where to look? How do i see the interactive boot? I tried remove the splash and quiet from grub config but i could not see anything there. I got too fast to the x login.
View 9 Replies View RelatedI would like to know how would i disable service which helps mounting of removable devices automatically?I dont want to disable mounting but i would like to disable automatic mounting of devices.I would like to do this as security major on one of our production server.
View 9 Replies View RelatedWhen installing a package that runs a service why is that service started? Surely, this flies in the face of convention and security.
View 14 Replies View RelatedAnybody else get this message after a recent upgrade to testing (at least)?
Setting up portmap (6.0.0-3) ...
Starting portmap daemon....
There are RPC services which were registered with the portmapper before the configuration was changed. You need to manually restart them in order for the changes to take effect. Current registered services:
[Code]....
Why some application has daemon and some others doesn't. I thought just network application has services like httpd, nfs, cups.... but I just found out that cron, gpm.. and other has it to. why other some other applications hasn't got daemon. Just want to know what sort of application has services.
View 2 Replies View RelatedFresh install of F12 live cd to hard drive. Click on System - Administration .....should be a services icon to click on? where is it? How do I get it?
View 5 Replies View Relatedto disbale some unnersercary services in fedora 11.i have bluetooth and ssh disablesdwhat services van i also disable?is there somewhere an howto for it?
View 2 Replies View Relatedgdm seems to be missing from system-config-services.Cant find in in /etc/rc.d/rc5.d either.Does anyone now how it gets started ?
View 2 Replies View RelatedFedora 14 is freezing while starting services. what I know is that the system is passing kernel verification. Is there a way to choose which service to start during bootup?
View 3 Replies View RelatedI'm trying to find the systemctl equivalent of "chkconfig --list".$ systemctl -t service -alooks like the command, but it does not return any line about the ntp service. It does exist because I get this:
$ systemctl status ntpd.service
ntpd.service - Network Time Service
Loaded: loaded (/lib/systemd/system/ntpd.service)
[code]...
Why is the services tab grayed out in the ubuntu one client? Is this an error? should it be syncing files I have in the ubuntu one folder on my hard drive?
View 2 Replies View RelatedBasically services aren't starting up, like cron, VBox, ssh. I suspect a problem in the boot process, but I don't know where to look for errors with init or upstart or whatever it is these days.
View 5 Replies View RelatedIt would seem MySQL and VSFTP no longer create pid files and monit requires a pid file to work. Is there any way to force MySQLD and VSFTPD to use pid files or am I out of luck?
View 3 Replies View RelatedI am working on a notebook which has both gnome and wmii. I am trying to find a way to script stopping various services when booting into wmii however the "service xxx stop" requires sudo..Is there a way to allow a user to manage services without the need for sudo (aside from password-less sudo)? I assume there are permissions complications with writing the PIDs, etc. Is there a 'simple' solution? Even possible passwordless sudo just for the 'service' command?
View 2 Replies View RelatedI recently became responsible for a server running Ubuntu 10.04. I am trying to figure out how its outbound mail service is setup. Everything is working fine now, I just want to document how it is setup so if I need to rebuild the box I can do so without too much trouble when the pressure is on. It is a pretty basic setup, the only outbound mail gets sent from php scripts, the server does not receive incoming messages. Is there a place I can look to see what service is sending outgoing messages?
View 2 Replies View RelatedI have three HP diskless thin clients and a Server with Ubuntu installed. I'd like to be able to run the desktop version of Ubuntu on the clients straight from the server, akin to what would be possible on Windows Server running terminal services and thin clients. Is this possible?
View 1 Replies View RelatedI spent a few minutes googling this, but I am not even sure what to search for. I suspect I'm looking at part of upstart, but it could also be sysvinit, plymouth or something else entirely. Every time I reboot, just between plymouth's splash screen and gdm loading, I am shown a list of services starting. The list shows the names of the services and [OK] if they started sucessfully or [fail] if they did not (only apport ever fails and only occasionally). I don't need or want to see this list. It also interrupts the transition from Grub to GDM (the background color should be the same shade of purple from grub all they way to the desktop, but this list is presented as ordinary terminal output: white text on black background)
View 4 Replies View RelatedI've a little Server and wanna start the services (postfix, apache, etc.) without root. My problem is, that I've installed GroupOffice and I allways got errors about permisions in some folder. When I took a look, some of the folder the apache created were from root some from www-data. After some searches in the Internet I've read that only the root user is allowed to start a Service at Ports 1-1024 or something like that...
I've already searched for programs which give the rights to the applications / unlocks them with root for a certain application ... but I've no more idea what words to search for.
Where is that **itt implemented? Is it possible to disable that?
How can I start the services without giving them root privileges?! It's a security issue after all.
I want to configure following serivices on non-standard (or not well-known)port uisng RED-HAT LINUX INETD: TELNET, SSH, SNMP, FTP
1) Is there any issue/limitation doing this?
2) Any caveat or peculiarities related to any of the services?
I am using fedora core 9. I want to enable telnet and ftp services . I used following commands
service xinetd reload which gives error as unrecognised service and
/etc/init.d/xinetd reload which gives error as no such file or directory
how to install and start this service ?
so, where is the file determinaing what services start?I need to turn off freshclam, clamav-milter, and rsync...how do I do that from console or can I just edit a .conf somewhere?
View 7 Replies View Relatedi have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies View Relatedi am using rhel 5 in my pc how i can enable the net connectivity on my pc
View 1 Replies View RelatedIn red Hat linux i want to implement NIS server. For that purpose i check the current running services under (Server settings,Services) but NIS was not listed in it.please let me know is there different name of NIS service or i have to install it separately
View 7 Replies View RelatedI'm trying to stop all the services on port 80 by I'm not entirely sure how.Infact, I don't really know what's running on port 80... I tried throwing a netstat -a in a prompt but I don't see port numbers anywhere so I can't figure out which PID to kill.Any ideas on how I can figure out what's running on port 80, and stop it?
View 14 Replies View Related