Spotify released a native linux client about a year ago. It would be awesome if I could use it on my linux desktop at work. Unfortunately, these computers are managed by a central server and so I can't install anything without system admin rights. I was wondering if there was a binary available that I could run from my home directory? The operating system we use is openSUSE 11.3 64-bit.
View 1 RepliesI have a Dell laptop which originally was strictly a Windows computer; with a LiveCD of PCLinuxOS, I partitioned the drive to make room for dual boot with Linux. Unfortunately, I gave the Root directory too much space, and Home not enough. Is it possible to move anything over to Root to give Home more room? I would get rid of Windows entirely, but for a couple of programs that have no Linux equivalent (at least that I've discovered so far).
View 2 Replies View RelatedMy machine telling me that my home directory is running out space,It is said 95% in usage.Try to delete the big unwanted files in users (just two user in my machine),df ing, but the home usage status keep on 95%.
View 9 Replies View RelatedI'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
I have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
I've been trying to get Spotify running in wine on Maverick. I've had this running on older versions of Ubuntu in the past, but now it's not working. Spotify loads up fine, but as soon as I try to play some audio it crashes. When running it from the terminal I get the folowing backtrace:
Code:
Backtrace:
=>0 0x5ad88450 (0x1515e6a4)
[code]....
I'm trying to autodetect if certain applications (for example, Firefoxre running. I figured the easiest way would be by checking process names.
View 2 Replies View RelatedI have written a c program. And compiled it to make a binary. Now when i try to call this binary from php page, it is not being executed.
View 14 Replies View Relateddiff has the ability to trasverse directory structures. cmp has the ability to manage binary files.
I'm looking for something which allows me to compare a directory's contents, including files and subdirectories, and so a binary comparison.
Any suggestions, scripts, etc. which may be of help?
Some of my directories are huge, with huge (image) files in them.
I have a strange problem when I do SSH to a FEDORA9 based Linux Server.
[Code]....
When I login using "adah" username in TELNET I am automatically directed to my home directory at location "/media/disk-1/home/adah". But when I use SSH to login using the same username I get the following message Code: Could not chdir to home directory /home/adahaj: Permission denied
I have a dual-boot macbook with an OS X partition and an ubuntu partition. When I first installed ubuntu, I changed my home folder to my OS X home directory to synchronize all my files from both. My home directory is now /media/sda2/Users/username/. In a regular home folder, the icons for Documents, Music, Pictures, Movies, etc. are different (not just with emblems, but actually different icons). But when I changed my home folder, these subfolders' icons stayed the same as regular folder icons and I can't figure out a way to change that default setting. I know how to change the icons for each folder manually, but these changes don't appear everywhere (i.e. nautilus, places, etc). Furthermore, every time I change my icon theme, I would have to manually reassign icons for these folders. Is there a way to globally change the folder icons for these folders?
View 2 Replies View RelatedI have a secondary disk which holds a /home directory structure from a previous install of Linux. I installed a new version on a new primary drive and mounted this secondary drive as the new /home. Problem is, even though the users are the same names and I can access the home directories for the users, I cannot login directly to their home directories, as I get the following error: -
Code:
login as: [me]
[me]@[machine]'s password:
Last login: Wed Jan 6 18:34:33 2010 from [machine]
Could not chdir to home directory /home/[me]: Permission denied
[[me]@[machine] /]$
Now, since the usernames are correct and the users are in the passwd file with the correct home directory paths, could it be user ID's that are different or something else? It's not as though I cannot access the home directories for the users, simply that I cannot log directly into them from a login prompt.
Is there anything special about a home directory before users' home directories are stored there, or is just as typical as any other "empty" folder?Let me just cut to the chase, but please no ear ringing about the folly of messing around as root, particularly with directories at root level. I know it's considered stupidity, but I deleted my home directory.
Is there an easy way to restore a working home directory? I tried copying /etc/skel under root, but I'm not sure what a home directory should look like once it has been restored. Besides . & .., there were .screenrc & .xsession in my home directory when I copied /etc/skel. Are these files suppose to be in "/home" or "/home/~" or both?
I need to specify a different path to home directories on a particular server than what LDAP contains for the users, besides using a symlink. E.g. "/Users/jdoe" vs "/home/jdoe" I don't want to change the actual LDAP attributes, just want a particular server to point them in the right direction (Ubuntu 10.04).
I'm assuming it's something I could probably set in pam configurations?
% apt-file search bin/ooffice
openoffice.org-common: /usr/bin/ooffice
% apt-cache policy openoffice.org-common
openoffice.org-common:
Installed: 1:3.3.0-6
Candidate: 1:3.3.0-6
Version table:
*** 1:3.3.0-6 0
500 ftp://ftp.us.debian.org/debian/ sid/main amd64 Packages
100 /var/lib/dpkg/status
1:3.2.1-11+squeeze2 0
500 ftp://ftp.us.debian.org/debian/ wheezy/main amd64 Packages
% /usr/bin/ooffice
zsh: no such file or directory: /usr/bin/ooffice
1.What character instructd the shell to interpret a special character as an ordinary character?
2.What directory contains some of the utilities available on the system in the form of binary files?
3. What command is used to search the location of a utility?
4. What command is used to instruct the editor to write the file and quit the editor?
5. What key quits the more utility and displays the shell prompt?..........
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
View 14 Replies View RelatedI'm using Mac OS X's Terminal.app shell to compile and run Fortran programs. One such program resides outside of my home directory (it is in the Applications folder, which resides on my hard drive but seems to be outside of my home folder). How can I navigate into this directory using Terminal.app to run the programs that reside there?
View 7 Replies View RelatedIs there any Linux utility to combine two or more binary files into a single binary file ?
View 7 Replies View RelatedHow to coded version info and other information likes author and company name into the ELF binary?
I prefer the put the version info during build step.
I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]
[code]...
I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :
Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:
gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory.
gdm-binary[230]: WARNING: Unable to find users : no seat-id found.
gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds
The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.
How in the world do I find the Home Directory?
View 5 Replies View Relatedi have rhe5.4 ,in my system the user ac is not working while iam login in to root not able to login as a user and in root it shows the (X)mark not able to open this also ..
View 3 Replies View RelatedWhen i try and log in with my user it is giving me an error I have removed gnome from the computer and put kde as my desktop I can login with root can't enter home directory using / is the error
View 14 Replies View RelatedI use ext4 for the lvm2 home partition on Fedora 11. Yesterday, I must shrink my home partition and the operation crashed. Then a new ext4 partition becomes a backup "cp -R /mnt/backup/* /home" + chown + chgrp and boot Fedora again.
The login failed and the message of Fedora is "Cannot enter home directory. Using /."
What is the problem?
Every time I start a terminal it defaults to my Documents directory and I would prefer it default to my /home/thisuser directory instead. Anyone know how to set that? I tried looking in .bash_profile and didn't see anything. Nor did the man page have anything that seemed like what I was trying to do...
View 14 Replies View RelatedI've installed F14 to replace another distribution on my PC. I chose to use KDE. I used to have a separate partition for my user home to be mounted as /home. During the installation I instructed the installer to do so (without formatting of course). At the first boot I created a use with the very same name as I used to have. I got the warning about the home being already there and I said "yes, convert that ownership and selinux stuff so I can use that very directory as my home". At the graphical login I get a dialog saying I cannot enter my home and that it will use / instead. Of course the login process fails. If I switch to the character console (CTRL-ALT-F2) and do a login I actually get the very same error. But, if I hit "cd" (change directory to $HOME), then I get in the proper directory.
Update 1. I guessed it was a SELinux problem. And I manually disabled it into /etc/selinux/config. Now I'd like to fix this issue, because I'd like to have SELinux working.
I have been trying to get my development box up and running and I decided to do some CGI work in Perl and I am getting a 500 error on Apache 2. I have checked all the perl settings and the script runs fine on the CLI. I am simply passing a textfield from a HTML form to Perl. I was using the standard CGI.pm calls but I modified the script just to use print statements to make the output page. The script has one textfield in it, as it was just supposed to test the CGI.
I have the UserDir directive active for my user and I did some modifications to allow CGI execution from my home directory /public_html/cgi-bin/. the script will not run from the main /var/www/cgi-bin directory either,that also returns a 500 error. the permissions are 755 on both copies of the script in the cgi-bin directories.
I grant read privilege to all the users to my .vimrc file . But my colleague still can't read my .vimrc file . I guess in addiction to give the read privilege to the .vimrc file, in some way I should give the person who want to read it the "access right" to my home directory first---which I don't know how to do it.
View 3 Replies View Related