Software :: Slackware64 13.1 Blocked When Suspending Because Of NFS?
Jan 30, 2011
at home I use a computer running OpenSuse 10.2 to serve as an NFS server. I can mount the relevant nfs shares from my laptop running Slackware64 13.1, but there is an issue related to suspending the laptop to RAM: If the laptop is suspended to RAM (or disk) while it is connected to the network everything works fine. But if the network connection is cut before the suspend, it seems that the suspend scripts from slackware or the kernel or whatever blocks the whole system, so that suspend "never" happens. (Ok, it will actually work, but only after several minutes, resume will work fine anyway).
Is there a way to "normally" suspend the laptop to RAM even with active NFS mounts and a cut network connection?
View 1 Replies
ADVERTISEMENT
Oct 27, 2010
Everytime I try to suspend CentOS 5.5 the keyboard, mouse, and monitor will all suspend, but the computer itself will not. All the computer does is sit there with the fans still running. I cannot bring it back with the keyboard or mouse. I am forced to hard reboot and when GNOME loads it says something about the resume failing. I don't know what could be causing this. I have the latest NVIDIA drivers. My computer does suspend in Windows 7.
My computers specs are:
CPU: Intel e6320 overclocked to 3.00 GHz
Motherboard: Asus P5K3 Deluxe
RAM: 3GB Kingston HyperX DDR3
GPU: EVGA NVIDIA 7800GTX
View 2 Replies
View Related
Dec 19, 2009
I'm using x86_64 F12 on my dell inspiron 1440 laptop. My machine frequently freezes especially after suspending. Today, when I disabled the wireless connection, the machined freeze.
View 1 Replies
View Related
Feb 27, 2010
my laptop suspends and resumes ok, however i've noticed that when i suspend, my bluetooth dongle continues to flash, and if i check my phone it says i'm still connected.
surely this is a bad drain on my battery? how do i set it that my bluetooth will disable when i suspend the laptop then restart when i resume?
View 2 Replies
View Related
May 30, 2011
Ok, I am running a file server that can be accessed throughout the house. I was able to successfully wake from suspend and it works beautifully. Now what I need the computer to do is go to sleep after lets say 30 minutes of inactivity so that I never have to touch the computer and it will use minimal power until I need it.
Anyhow, I tried to set the settings in Power management and the only thing that happens is the display turns off. the suspend on the desktop works fine, I can type in sudo pm-suspend and that works fine. but the computer just wont go to suspend automatically by way of the power manager.
I have tried changing the /etc/pm/config.d/00sleep_module to say SLEEP_MODULE="uswsusp", but that only made the computer go into some crazy linux mode that I had to reboot from. I had to change SLEEP_MODULE="kernel" (actually, I left it blank as it is the default).
I also turned off my screensaver so there wouldn't be any confusion from that.
I also ran cat /var/log/pm-powersave.log and I got a long list with the following being one of the main texts that kept repeating. "/usr/lib/pm-utils/power.d/sched-powersave false:**sched policy powersave OFF"
View 1 Replies
View Related
May 14, 2010
What happened:- I run out of battery (laptop)- I believe Kubuntu tried to suspend to disk, but that failed, the system froze- after reboot the system tray applet just told "network manager disabled" How do I fix this ??.. I tried but after entering the second line of code it says no such file/directory exist...
Code:
service network-manager stop
rm /var/lib/NetworkManager/NetworkManager.state
[code]....
View 3 Replies
View Related
Nov 6, 2010
i have set up a laptop running maverick as server but the problem is that when i put down the screen ubuntu suspends my laptopwhat should i do??
View 3 Replies
View Related
Dec 8, 2010
How can you do that in lubuntu 10.04? In xubuntu 9.10 I could do that, if I use gnome-power-manager and gnome-screensaver, and use gnome-power-manager's icon to suspend/hibernate, but I don't see that kind of option in lubuntu.
View 1 Replies
View Related
Dec 30, 2015
I've just installed new Debian 8 from live CD, lxed. The problem is urgent, I cannot do anything on my laptop, the computer keeps on suspending/hibernating every 30 seconds or so.
View 4 Replies
View Related
Oct 20, 2015
I have a problem with my computer running debian testing with kde. When after a while I'm away form keyboard my screen turn off for power saving, but I cannot in any way turn it on again.
I tried moving mouse, pressing some key, Ctrl + Alt + Del, Ctrl + Alt + BackSpace, Ctrl + Alt + Esc, and also Ctrl+Alt+F1/2/ecc.. No way. I had to reset my computer every time.
View 1 Replies
View Related
Aug 22, 2015
I can't suspend my laptop because after suspending the system and pressing the power button I only get a black screen. As Debian wiki suggests, if CapsLock LED works the system is still running, which is not my case. I don't know why the system doesn't get back control.
No matter if I press Fn+Sleep keys, go to the Xfce menu, or type:
Code: Select all$ pm-suspend
$ systemctl suspend
Anyhow I get the same result.
I've already followed some other posts but they didn't solve my problem:
Upgrade/update ruined suspend/hibernate in Jessie
Debian 8 resume issue (ATI card)
It's tough to debug since I need to restart the laptop everytime I try.
View 11 Replies
View Related
Jul 18, 2011
I currently have fedora 15 installed along side windows 7 on my acer aspire d250. So far it runs great, however I was wondering if there is a way to make fedora 15 hibernate after being in suspend for a period of time, just like windows 7 does. This make sense to me as there is no point in wasting battery life if i can hibernate, but I don't want to hibernate all the time, just suspend for a period of time, like 2 hours, in case I need my netbook again i have quick access to it.
View 2 Replies
View Related
Feb 5, 2010
Is there any way to stop having to re-enter my password after Suspending to RAM?
View 2 Replies
View Related
Mar 3, 2010
I have a Dell Dimension 3000, Ubuntu 10.04. I often suspend and wake it throughout the day, sometimes as many as 10. Will this have adverse affects on the hardware's performance/longevity?
View 1 Replies
View Related
Aug 20, 2010
I ran a test where I filled up the /var partition. The disk_full_action in auditd.conf is SUSPEND. I was expecting to see a message in /var/log/messages to indicate that the audit daemon was suspended because it did not have any space left on the partition.Why didn't I get these messages? Also, how can I tell if the audit daemon is suspended?
View 4 Replies
View Related
Mar 31, 2016
I'm using xfce, and the power manager settings, to only lock the screen when close, are not honored. The laptop suspends, no matter what, when closed. Is there a way to forcibily only allow xfce power manager to handle the close lid behavior?
View 2 Replies
View Related
Jan 7, 2015
I think my USB mouse randomly suspends, at the very least it freezes. It is plugged into a USB switch, I have to either unplug the mouse and plug it back in, or switch it to a different computer for it to come back, sometimes it freezes within seconds again.
How can I resolve this. I looked at [URL] ...., but had problems following the folder hierarchy.
NOTE: laptop-mode-tools, powertop NOT installed.
lsusb reveals:
Code:
Select allBus 003 Device 010: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      0 (Defined at Interface level)
 bDeviceSubClass     0
 bDeviceProtocol     0
[Code] ....
I'm not sure where I can find Bus 003 Device 010 to check 'power/control' for 'auto'.
View 7 Replies
View Related
Jan 20, 2010
I would like to be able to suspend to disk or Ram from the command line. I can do it with the package 'hibernate' which works well, but it needs to be run as root:
Code:
Do you know if there is any way that I can make this script run by normal users?
I am using a minimal version of 9.04 with openbox.
View 9 Replies
View Related
Oct 13, 2010
These forums have been my bible ever since I switched from windows to ubuntu... especially because I was so scared that my laptop was always hot (if you know how to change the temperatures at which HP dv7 laptop fans start kicking the hell in- let me know!). 10.10 has improved this so I'm really really happy with this. Seriously love Ubuntu. Okay, enough for intros.
[Code]....
I want to run this after resuming from suspending. I've been successful in running the script on startup but couldn't do anything about resuming from suspending with these methods [URL] and every other in the forums. By the way, these commands enable Two-Finger Scrolling (doesn't work if you put both your fingers in an horizontal line or vertical).
View 8 Replies
View Related
May 19, 2010
I have a need to recompile mesa. The --enable-32-bit option falls over every header and basic 32 bit lib, and won't compile. But if I try to install 32 bit packages, I could slap a 32 bit binary straight on top of my 64 bit one. What's the accepted way of doing this? I can't seem to find a package in Slackware 13.0
View 9 Replies
View Related
Sep 1, 2011
I installed 11.04 on a t420 Thinkpad, and sometimes it suspends normally, but sometimes it cuts to a black screen with white text (attached) and won't finish suspending, making me do a hard reboot.
I tried to fix it by using s2ram, but that did not solve my problem.
View 2 Replies
View Related
Dec 10, 2010
I've just recently installed Slackware64 release 13.1 in my HP6910p laptop for the first time. I've built several desktops and a few laptops using Fedora & UBUNTU. But, I really wanted to get to know the Slackware. I was told that if you really want to learn LINUX, Slackware is the way.
Anyway, I realize Slackware provides a PDF reader, but I wanted to learn how to install AdobeReader, which only runs in 32bit, to my Slackware64 platform. In that way, I would learn about dependancies, etc...
View 3 Replies
View Related
Dec 16, 2010
if there were any alternatives to knotify. in running xfce and i was hoping to get gnotify(thats what ubuntu uses right??) or any other alternative works.
View 2 Replies
View Related
Nov 28, 2010
I just installed mythtv 0.23.1 on my slack64 13.1 machine using a Hauppauge DVR-2250 TV tuner card. The install went fine (no errors) but I am facing a few glitches. I setup the program using mythtv-setup.
I added the tv tuner in the program's tuner list and scanned the channels using the scan feature. It found something like 38 channels (OTA). So far so good. When I start the application I go to watch TV and I see a white/black screen with a big "1" saying :Playback starting" and then it goes back to the application's menu. here's the output of mythbackend while I was playing around witht he front end
Code:
2010-11-28 18:45:34.478 mythbackend version: tags/release-0-23-1 [0.23.1] www.mythtv.org
2010-11-28 18:45:34.479 Using runtime prefix = /usr
2010-11-28 18:45:34.479 Using configuration directory = /home/lpallard/.mythtv
2010-11-28 18:45:34.480 Empty LocalHostName.
2010-11-28 18:45:34.480 Using localhost value of htpc
2010-11-28 18:45:34.490 New DB connection, total: 1
[Code]...
View 10 Replies
View Related
Jan 22, 2011
I am trying to install the latest version of skype available in SBo repository (2.1.81.1) and although it is marked as not tested and supported , it was built successfully and installed. When i try to start it via console, there is an error:
Code:
skype
bash: /usr/bin/skype: No such file or directory
Here is a little bit more info:
Code:
find / -name skype
/tmp/SBo/package-skype/usr/bin/skype
[Code]....
View 2 Replies
View Related
Feb 13, 2010
I am having a hard time compiling libmp4v2-1.5.0.2 in slackware64-current. It always fails with:
PHP Code:
make[2]: *** [rtphint.lo] Error 1make[2]: Leaving directory `/home/Downloads/libmp4v2-1.5.0.1'make[1]: *** [all-recursive] Error 1make[1]: Leaving directory `/home/Downloads/libmp4v2-1.5.0.1make: *** [all] Error 2
View 5 Replies
View Related
Apr 18, 2010
Anyone knows a slackbuild for netbeans 6.8 for slackware64?
View 5 Replies
View Related
Apr 29, 2011
Is it just me or does the font rendering in Slackware64 13.37 look bad? It reminds me of the bad old days of having to recompile freetype with the then-patent-encumbered option to make the fonts look decent. When I print, everything looks normal. On screen it doesn't look right. I don't really know how to describe it other than it how things used to change after a freetype recompile. Is there anything major that changed between 13.1 and 13.37 WRT fonts in KDE, X, or freetype for that matter? FWIW, I did a clean install with a new .kde instead of using the old one.
View 14 Replies
View Related
Mar 7, 2010
after this bug update, my laptop loose the sound, I have run alsaconf and nothing.If I run rc.alsa I get:Quote:Loading ALSA mixer settings: /usr/sbin/alsactl restore
/usr/sbin/alsactl: load_state:1608: No soundcards found...
View 1 Replies
View Related
Feb 20, 2011
I've tried reinstalling Slackware64 13.1 to my PC a number of times over the past couple of days and I still have not been able to get it to boot.
Once it's installed I reboot and it tells me it can't find the operating system.
I've tried fdisk, cfdisk and GParted to set up the disk by deleting partitions and recreating them.
When I install and get to the section about installing LILO it says I have an OS/2 or Partition Magic boot manager on the drive, but there isn't. It asks if I want to install LILO in a compatible way with the boot manager and I say no, and install to the MBR. When I reboot it says it can't find the OS.
When I try to boot from the install DVD and get to the boot: prompt, I'll enter /dev/sda1 and it says there is no kernel.
Is there something else I'm missing?
View 1 Replies
View Related
