Software :: SVN Won't See Filesystem / Resolve This?
Jun 17, 2011
I installed a new server with Centos 5.6, did all the upgrades and it is running smoothly. I copied my backup SVN directory structure over to the new server and set the permissions the same as they were on the old machine. But now when I try to access a repository, I get the following message:
svn: Could not open the requested SVN filesystem
My subversion.conf is set up in /etc/httpd/conf.d just as before and I restarted httpd. My svn access passwords are the same and in the same location.
View 3 Replies
ADVERTISEMENT
Mar 24, 2010
I have a 64 bit Karmic system with two drives. One is mounted as / and the other is mounted as /home. I just put the video card from my system into my son's system and got a new video card. (Don't see how it's related but still...)Now I am getting the following message when I turn on the system. code...
View 1 Replies
View Related
Jul 19, 2010
I'm trying to partition/format a new external hard disk for backup and have run into a snag that now prevents my computer from booting. In the description below of what happened please bear with me as I do my best to remember the commands and screen output (which for obvious reasons I don't have in front of me).As root.The disk was subsequently writable. However, I then realized that the default start and end cylinders had resulted in a very small partition apparently occupying some free cyclinders in the beginning of the disk.
So next I ran fdisk again, deleting the sdc4 I had just created and creating a new one instead, this time using the cylinders at the end of the disk. When I exited fdisk I got a message something like that the new tables can only be read upon a subsequent reboot. I ran mkfs again, but not e2label. Indeed using /sbin/fdisk -l, sdc4 still had the small size as defined initially. So I rebooted.
Now when it comes up I get something like "checking filesystems. fchk.ext3: can't resolve 'LABEL=/media/LaCie2TB1'" and am prompted to login as root to correct. I tried to simply delete sdc4 again but that didn't help. I also tried to edit /etc/fstab (using vi, which I don't know at all) but it kept telling me that this is a read only file, even though permissions are rw for root.Can anyone out there help me so that (1) I can boot into my computer, and (2) I can correctly partition and format the hard drive??
View 2 Replies
View Related
May 18, 2011
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
View 2 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Mar 11, 2011
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
View 2 Replies
View Related
Jul 9, 2010
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
View 5 Replies
View Related
Mar 24, 2010
I've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies
View Related
Aug 19, 2010
After trying a "fix" I found on another thread, nobody can log into my laptop! After each attempt, a single message shows up in /var/log/messages code...
This worked for me:
Use a Ubuntu Live CD to boot up, and choose a command-line (shell) option.
With this, set your $HOME directory (/home/username) permissions to something appropriate (I used 755) and make sure all directories can be listed with the "ls" command. Then remove nautilus with code...
The only thing I did differently was I booted into recovery mode from the grub menu rather than from live CD.
View 9 Replies
View Related
Feb 25, 2010
Code:
root@localshot:/etc/rc.d# host dc3
dc3.test.com has address 192.168.1.2
Code:
root@localhost# nslookup dc3
Server: 192.168.1.100
Address: 192.168.1.100#53
[Code].....
Why 'dig', could not resolve name to IP, whereas 'host' and 'nslookup' could...
tested on RHEL5 and Slackware 13
View 2 Replies
View Related
Mar 14, 2010
Since yesterdays updates I am not able to login into KDE any more. I get the login screen. After entering the password the screen gets black and then the login screen appears again.
The last entries in kdm.log look like this code...
View 2 Replies
View Related
Jan 24, 2010
When trying to log in I get the notice:
"OpenID authentication failed: Nonce already used or out of range"
I managed to use Ubuntu One once today. After that this started.
View 3 Replies
View Related
Apr 30, 2010
I can not run gdesklets in ubuntu 10.04.
When I do gdesklets check I got this message:
ERROR:/build/buildd/pyorbit-2.24.0/src/pyorbit-utils.c:39:_pyorbit_escape_name: assertion failed: (keyword_mod != NULL)
- ORBit ...Aborted
View 4 Replies
View Related
Jun 24, 2010
I have that serious problem,when I can't install my newest graph drivers,because i can't run them.
View 2 Replies
View Related
Sep 23, 2010
I am trying to set a static ip in Ubuntu 10.04 so I can use NX client on my Vista box.
auto eth1
iface eth1 inet static
address 192.168.0.100
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
However, when I try to use the Internet I can't get out. That seems like a dns issue to me, when I ping google from a terminal I get: unknown host [URL]
View 1 Replies
View Related
Sep 24, 2010
I have been using 8.04 for a year & it's been wonderful. Recently I saw the invitation on 'update manager' to upgrade to 10.04 & went ahead wih the download, but when the system tried to reboot the problems started &, I see from the forums, this seems to be a widespread problem. You get as far as UBUNTU & 5 dots then nothing. I have read as much as I can, understood a little but got nowhere so I thought I'd recover my files (hopefully) with the 8.04 CD using photorec & then reinstall my 8.04. Problem is the CD will not boot. I've used 'help' & installed the boot helper but I get the BusyBox message and don't know what command to put in.
View 9 Replies
View Related
Oct 11, 2010
I was able to get it to start an initial sync. I had to restart my computer and now all the green checks from my synced folder have disappeared and I cannot sync anything else.
View 9 Replies
View Related
Mar 17, 2011
I have been using Ubuntu for many years.
I bought a new hard drive (has not arrived yet) and getting ready to install it when it arrives.
My computer/workstation has a number of hard drives installed inside that are all SATA drives.
The boot drive (Ubuntu only, I do not use Windows) is a 500GB USB notebook drive installed in an external case.
I have an 80GB internal drive with an old Ubuntu install. I decided to remove that drive (pulled the drive) to make room for the new drive.
But the new drive did not come in the mail, so I put the computer back together without the old 80GB drive (SATA 0).
To my surprise it would not boot to the 500GB USB drive?
Black screen with the blinking dash...
Removed every drive but the USB 500GB drive and the CD from the BIOS boot menu. Made the USB THE drive to boot to.
Black screen with the blinking dash...
Using a 10.10 LiveCD I can access that 500GB drive.
Thus, it is hooked up and works but does not boot. Gparted says there is a BOOT FLAG in the Linux partition of the 500GB drive.
My only conclusion was I altered the boot order for GRUB so I put the 80GB drive back in the computer.
I did not edit GRUB in any way, I simply physically pulled the drive when the computer was off.
Black screen with the blinking dash... code...
View 3 Replies
View Related
Jun 13, 2011
i don't know what's happening here, but my computer keeps freezing in ubuntu... i can't figure out what's triggering it, because it happens when i'm doing different things. the time between freezes is always different, sometimes hours, sometimes a whole day, and sometimes back-to-back after a reboot. the only way to get out is a hard reset. whatever sound is playing will just continue to loop. it's happened while watching (non-full screen) videos, while using eclipse (luckily had just saved work), and while just general browsing. i tried reinstalling 11.04 because it happened before, and for a little while i thought it was fixed, but in the past few days it has picked up again. the only thing i can think of that i have installed was some new drivers for my bcm43225 wireless because it was always slow.
View 9 Replies
View Related
Jul 8, 2010
Fedora 11 is constantly freezing after a few minutes up. I run memtest but couldn't complete the test becuase the machine keeps freezing during the test. All fans are working and the CPU's temperature is normal (around 49C), so I don't think it overheats or something. I really don't know what is happening.
I tailed the messages log: Code: tail -f /var/log/messages and waited for the machine to freeze again. A second before it froze I got the following message in the log.
avahi-daemon[1498]: Invalid response packet from host 10.0.0.78
View 3 Replies
View Related
May 17, 2010
I am trying to setup a DNS on Fedora12. Here is my /etc/named.conf file
Code:
options{
listen-on port 53 { 127.0.0.1; 172.17.70.150; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
[Code]...
View 5 Replies
View Related
Feb 23, 2010
No idea whats going on here I host a couple of domains. Recently I changed ISP and had a change of IP address. I changed my zone files to the new address and updated my nameservers to the ones given by the new ISP and now, my main domain wont work, I can however, receive mail, checking using DNS quick check works and other domains are fine. I'm using OPENSUSE 11
domain
http://www.smalljokes.net
works fine
http://www.hatchnet.com.au
fails
I'm sure i'm missing something simple.
View 7 Replies
View Related
Jan 21, 2011
How to solve broken shell problem
View 1 Replies
View Related
Nov 5, 2009
I detected a strange problem in my box , whenever I tried to open a VCD which normally a .dat files , the CD cant get mounted , so after long time , when I try to eject it shows , probably no media in the drive .
View 1 Replies
View Related
Oct 1, 2010
I would like to build a SAN with like 4 TB of space on it. What is the best way to accomplish this task?
- What exact hardware would I need.
- What exact software do I need.
- How to bond two Ethernet cards together to get better network performance out of the box
I am looking to find a cheap rack-mount server cabinet. What is the best file system for a SAN? Is there a particular distro that works well with this? I prefer CentOS as that's what I have been learning on.
View 1 Replies
View Related
Sep 23, 2015
I'm using Debian Testing (I know it doesn't happen in Stable)
Words isn't required here. I'll show examples:
# aptitude dist-upgrade
Code: Select allThe following NEW packages will be installed:
appstream{a} coinor-libcoinutils3v5{ab} coinor-libosi1v5{ab} cpp-5{a}
g++-5{a} gcc-5{a} gcj-5-jre{a} gcj-5-jre-headless{a} gcj-5-jre-lib{a}
geoip-database-extra{a} gnuplot5-data{a} gnuplot5-qt{a} icoutils{a}
kded5{a} kinit{a} kio{a} libapt-inst1.7{a} libapt-pkg4.16{a} libasan2{a}
[Code] ....
Why apt-get can while aptitude can't?
I've searched on web, and all I can tell is that aptitude is "safer" than apt-get because it taking account the packages on hold.
But I don't have any package on hold! (I've tested dpkg --get-selections | grep hold)
View 11 Replies
View Related
Sep 6, 2010
I have an ftp script that will run fine manually when logged in as root. I set the root's crontab to run this file and it won't run. The script run fines from the command line with either "./ftpcall.sh" or "sh ftpcall.sh" but doesn't run at all in the cron. Permissions are obviously set to execute as it runs fine from shell.
View 3 Replies
View Related
Sep 18, 2010
I've been trying to use aptitude for package management, but nothing happens in response to my commands, even as root.
Let's say for example I want to purge popcon. According to the helpfile, I should start aptitude, become root (or vice-versa), select the package in the list and press '_' (underscore), and then it will be marked with something in the left column and a different color in the list. Then later, another command will actually do the purge.
But nothing happens. It doesn't get marked or change color or anything, and 'g' just gets the message 'No packages are scheduled to be installed, removed, or upgraded.'
What am i doing incorrectly?
View 6 Replies
View Related
Mar 16, 2011
I just installed Debian only to be confronted with a problem. My wireless internet won't work. If I click the internet thing, under "Wireless Connections" it says "device not managed", btw my internet works and it did when I had Ubuntu, so nothing wrong in that department.
View 5 Replies
View Related
Apr 18, 2011
So I recently upgraded from Debian 5 to Debian 6 and now for some reason I cant SSH into my server FROM my server. All of the following fail with the same error:
[URL]
They all come back with: ssh: Could not resolve hostname 127.0.0.1: Name or service not known. I never actually tried this before upgrading so I'm not sure if its caused by the upgrade, but I would like to get this fixed. Also, ping with all of the above hostnames fails as well. I can SSH in from other computers and I can SSH out from the server. For whatever reason, I cant SSH from the server to the server though.
View 4 Replies
View Related
