For some reason my QEMU guest no longer can connect to the internet. I have no idea what changed but it was working just a few days ago. I have an Ubuntu host and a debian guest. what I might be missing ?
View 1 Replieshow to connect OS "ubuntu 9:10" as the host, with Qemu as a guest.?I can not connect from the host to geust, how to connect??I use Samba to connect the host to the guest.I was able to ping from guest to host, but from host to guest can not ping .. why?
View 1 Replies View RelatedI used qemu (qemu-0.9.1-i386-2_SBo) with Windows98SE as a guest, but since the last Slackware-current update of this version of qemu no longer works ...more precisely after "Mon Apr 8 06:58:48 UTC 2011" Update
Then installed the version "qemu-0.12.5.tar.gz" of Slackbuils, but this If the mouse is not detected in Windows 98 I also installed the version of the Alien "qemu-0.10.0-i486-1alien" without success Windows 98SE worked very well with the version of qemu-0.9.1-i386-2_SBo!I know the mouse is not detectable in Windows 98SE is a Bug [URL].. ps: I also have not had success in Slack 32. I use on a daily 64-bit version of Slackware .
host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
When I try this yum install kvm qemu libvirt python-virtinst qemu-kvm I become this error
Transaction Check Error: file /usr/share/man/man1/qemu-img.1.gz from install of qemu-img-0.10.5-1.el5.2.x86_64 conflicts with file from package kvm-qemu-img-83-164.el5_5.25.x86_64
how can I resolve this error
I am running qemu version 0.13 on windows XP. My Host OS is Windows XP and my guest OS is Debian 4(Etch). How do I connect to internet from Debian OS? My windows OS can connect to Internet. The following is the launching command which I am using now to launch qemu in windows XP.
qemuqemu.exe -L "qemu" -boot c -hda "debian4.img" -m 512 -localtime -ctrl-grab -usb -net nic,model=ne2k_pci,macaddr=52:54:00:12:34:56 -net user -redir udp:161::161 -redir tcp:4440::22
qemu-img , create any imagerun qemu -fda bootdiskwin98se.img -hda image.imgand No drive C what's going wrong with qemu-img/qemu?
View 3 Replies View Relatedjust learning qemu. Been able to figure out everything fine, except one thing: what do I need to add to my qemu command-line to give my VM access to the Internet?
I read online docs, but to be honest, the VLAN/TAP stuff they describe doesn't make much sense to me.
My machine is HP Pavilion DV5. I am running Vista Home Premium as host and installed Fedora 10 as guest using Vmware Workstation 6.5.3 B185404. I am using wireless connection for Vista and use NAT for Fedora (as default). I cannot connect to the internet in Fedora. Is it because of the issue of driver for the wireless card in Fedora, not sure, coz Fedora just uses connection through the host right? I need to download packages and use for my program.
View 11 Replies View RelatedIs it at all possible to disable internet access for the Debian host while providing internet access to the VirtualBox guest(s)?
I plan to only hook up the host to the internet for updates, upgrades and installations, although if I can, then I will make a Debian guest to test everything out and download the files from there and install everything on the host without even a single host connection point.
Is this the indomitable approach to intercommunication security? If not, then what haven't I thought of yet?
I have a virtual XP as guest in VirtualBox on a computer running Hardy. I used to be able to access the internet from the virtual XP, using Internet Explorer or Google Chrome with no problem - it just used the Ubuntu host's connection, whch it seemed to see as a "NAT Adapter".
It still sees this NAT connection - if I hover the pointer over the Network icon in VBox it says "Adapter 1 (NAT): cable connected". And if I use Firefox from the host OS, it connects just fine.
Why can the virtual XP no longer access the internet?
I am basically trying to connect to Internet in Ubuntu 10.10.
I am using my mobile Nokia 6600 via bluetooth which unfortunately isnt supported by Ubuntu .
There have been many blogs and threads on the net to fix this issue but none worked for me.
So i tried to use virtual box 3.2.12 in Ubuntu to check whether Windows XP Pro can access net from my cell via bluetooth.
It worked!!!!! But my basic intention to get net in ubuntu was to install some really good softwares in ubuntu Software centre which otherwise require downloading of lot of .deb dependencies manually.
Can anyone tell me how to use the Internet from the guest windows XP in ubuntu?
I have an USB internet key (multimode GPRS/EDGE/UMTS/HSDPA) that only works on Windows. Though, I mainly use Linux for development activities and I don't want to move them to Windows. For this reason I decided to use a Windows guest on VirtualBox for internet access and the Linux host for the other stuffs, but I'd greatly prefer to use Linux for everything (internet too) and Windows only as internet gateway.
View 1 Replies View RelatedI have a Windows XP virtual machine under Virtualbox PUEL 3.1.2. I have always been able to browse the Web or do anything else I wanted over the network.
Suddenly, the guest XP machine can't reach the Internet any more. There is no indication of any problem with the network connection. I checked my router, and the virtual machine is indeed getting assigned an IP address. So why can't it reach the internet?
Yes, the virtual network adapter is in bridged mode. It always worked that way before. I can see local network shares from the virtual XP machine, and even reach the Apache server running on the host OS (Ubuntu 9.10 64-bit).
Also possibly significant: Even though the virtual XP machine is detected by the router & assigned an IP address, the printer attached to the virtual XP machine cannot be seen by another Windows machine (a real one, not virtual) on the network. I never had a problem sharing the printer before. I have to share it from a virtual Windows XP machine when I'm running Ubuntu because there are no Linux drivers available (it's a Winprinter).
I have set up my guest OS in VirtualBox so that it has a static ip and is using a bridged adapter. As a result, I can see the webserver that's hosted in guest from my host OS's web browser. However, for some reason my current setup does not allow my guest to reach the internet. What settings do I need to enable both?
View 1 Replies View RelatedI run KVM on 9.10 host and guest 9.10. Both are x64. When I halt the guest os:
My host OS looses its connection with internet for 10-15 seconds and then it comes back on. Probably something goes wrong with default gateway, as it looses only external network (I still can reach it on my internal network). I've googled a lot, but cant find anything about that. I use bridged network.
I have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version.
everything works fine on Linux host
I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc.
I tried setting MTU and TCP window size on Windows lower, but did not help
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies View RelatedI'm trying to install the Guest Additions for a VM running a guest Lucid Lynx Server. The problem I'm encountering is this: The vboxadd-install.log for vbox says it "couldn't find the sources of your current Linux kernel" and to "Specify KERN_DIR=<directory> and run Make again."
View 4 Replies View RelatedI have a local file server running Samba on Fedora 9. It's already configured and serves a few people without any problems. I am now trying to set up a new read-only share with the username 'guest' and the password 'guest'. However, with no success so far! If I log on as 'guest' with the password 'guest' like so:
Code:
su - guest
No problem. Once logged in, if I try:
Code:
smbclient //samba/share
I'm prompted for a password. If I enter 'guest' I get:
Code:
session setup failed: NT_STATUS_LOGON_FAILURE
If I enter nothing (null) I get:
Code:
Anonymous login successful
Domain=[RIVER] OS=[Unix] Server=[Samba 3.2.8-0.26.fc9]
tree connect failed: NT_STATUS_LOGON_FAILURE
OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies View Relatedwhen i apply this command $ make install --> that for build qemu for symbian in ubuntu i face this error -->mkdir -p "/amn/symbian/gcc/sf/adapt/oss+FCL+adapt+qemu.hg/symbian-qemu-0.9.1-12/bin" mkdir: cannot create directory `/amn': Permission denied
View 2 Replies View RelatedI had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).
View 5 Replies View Relatedi've installed kubuntu 10.04 on a sun virtualbox , and when i tried to install the guest additions i got this error in the terminal:
Building the VirtualBox Guest Additions kernel modules. fail ! (Your system does not seem to be set up to build kernel modules. Look at /var/log/vboxadd-install.log to find out what went wrong) i'am running windows 7 as a host operating system .
I'm new to VirtualBox and Linux, so I've run into a bit of trouble trying to set up an internet connection. My host is Windows XP, and my guest is Ubuntu 10.04. I am attempting to connect using NAT (I need simple internet access for browsing web pages and downloading/updating packages), though I have tried other types of connections and none have worked. I am using version 3.2.0 of VirtualBox, so a lot of instructions that I've found online don't apply to me because they are for slightly older versions. The official VirtualBox guide hasn't been helpful either because it says that NAT is supposed to work without any set up, but it doesn't, in my case. I don't really know what other information to provide - please let me know. Also, I know almost nothing when it comes to networks, so please be specific!
View 2 Replies View RelatedAfter patiently waiting for 30+ hours during install attempts with the "Virtual Machine Manager", I realized that it wasn't going to happen. So then I read about a possibly working version, qemu-kvm How to use this to get a VM install up and going ? For instance, this command appears to begin an install, but where does it actually create a vm image from that?
qemu-kvm -m 512 -cdrom /iso/Fedora-14-i386-DVD.iso
I am using DSL thru QEMU. I was able to install it to a hard drive image.I started the SSH Service but I'm not able to connect to it from my Win 7 box via putty. I've edited the hosts.allow file to ALLOW external usersI've turned on the 22 port on my win 7 box firewall.
View 1 Replies View Relatedive been struggling with this for the past 4-5 days, and finally give up trying to solve it by myself. ive been following the guide here: [URL].. everything works up until i get to the iptables command, when i put it in, i get the following message:
Code: iptables v1.4.10: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. this led me to believe that i did not configure my kernel correctly, so i rebuilt my kernel, building in all the modules that were listed. unfortunately, the only ones that were actually present in the make xconfig were
[Code]...
how to upgrade qemu and kvm to version 0.12 on repo?
$ sudo kvm | head -1QEMU PC emulator version 0.9.1 (kvm-72), Copyright (c) 2003-2008 Fabrice Bellard
$ apt-cache show qemu-kvm | grep VersionVersion: 0.12.4+dfsg-1~bpo50+1