Software :: Jack Not Working After Hibernate / Suspend - Solution For It?
Nov 29, 2010
I am using OpenSUSE with Reaper+SampleTank+wineasio+jack.
I experienced that if I go on suspend or hibernate, I cannot come back in a working state for these applications and jack seems to be stuck.
What is the solution?
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
When I try either one I just get the lock screen where I have to enter my password to return to my session, but the computer never suspends or hibernates.
I have a headless 10.04 ubuntu server ( running at home. Because I am a student I want to save some power by suspending the server when I really don't need it (school, sleep etc.). I have gotten WOL to work for me, BUT the suspend does not work.
I have tried pm-suspend and s2ram, but they both have same result; I lose all control (seems like a freeze) from my SSH, but it does not disconnect, and the server responds to pings. But I cant connect via ssh, or use the fileserver or any of the roles it has. I assume there might be something locking it when it tries to suspend, but I really don't know where to start looking (logs and stuff). I have googled quite a bit, but almost all failed suspends are some funky laptop issues, and this is not...
after i installed latest ATI proprietary drivers ( 9.3 legacy drivers) for my HP compaq nc6000 with a "Mobility Radeon 9600" the standby and the suspension stopped working, i mean, if i try to suspend or hibernate my laptop, it closes X (this is fine) but after it gets freezed on the whole screen black with just a blinking underscore and nothing more, neither an error message after reboot.All i can do is to force shutdown by pressing poweron button for 5 secs.I'm running on a lenny, stable with stable repo.What can i do to understand where does this problem comes from and maybe fix it?
I have a server with Debian Wheezy. I already setup Wake-On-LAN (from halt) and works just fine, but i need to have Wake-On-LAN from suspend or hibernate. None of them works, despite multiple solutions I tried.
The server is mainly used for remote backups and i will like to be able to suspend/wake on LAN automatically on certain period of time (when backups occur) or manually.
The first try was based on [URL] .... and [URL] ..... but without success.
I also tried: uswsusp and hibernate .. intended on using even TuxOnIce but looks complicate..
In BIOS there are some settings to manage the fans (Fan Speed Control Modes) which is set to 3 (Workstation). I also disabled all USB devices in BIOS (since i don't need them and i have read that some USB may create problems)
I used pm-utils and once i try suspend/hibernate the machine hangs with the fans still running ... and with some other hardware suspended.
Some info:
# acpitool -e Code: Select all Kernel version : 3.2.0-4-686-pae20110623 - ACPI version : 20110623 ----------------------------------------------------------- Battery status : <not available> AC adapter : <info not available or off-line> Fan : <not available>
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it).
I can hibernate, but when I switch on the system cold boots (it does not restore previous session).
Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each suspend suspend block a resume suspend block, but hibernate hibernate' is not followed by resume hibernate` ( I assume that this is not correct. )
Update on what I have discovered: I have discovered that the uswsusp package is missing from debian squeeze. I could get it from testing or unstable repository, but have to be careful about not pulling in other dependencies. I would like to know if it will fix it. Is uswsusp needed for hibernate. Or should pm-utils be enough. (suspend it ram is working fine.)
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
This is my first post here, so I'm not really sure about what sort of responses I'll get. I'm actually sort of regretting the name I chose cause someone else uses it on another website and I can't seem to change it. But that isn't the real issue, so I'll get to the point.
I've had a problem with my Toshiba L355D running Karmic, and now Lynx, overheating for a while. It doesn't heat up as much as other peoples PC's that I've read about, where I've seen numbers like 100c, but it still is significant. When the computer comes out of suspend the fan setting is at its extreme lowest, and the computer, which has had it's bios updates and the kernel modules set to come on when it loads, don't seem to affect it.
The PC will continue to warm up until it reaches its emergency override when the fan comes on, about 80c, and then the temperature will drop, usually at a low of 50 to 60 if given space to cool and 62 to 72 if it sits on a bed. In windows it runs cool no matter what.
Now I love Linux so far since I converted a year ago, but I'm not happy about this. I can ignore other small things, cause Ubuntu hasn't failed me like how Vista did when it erased itself with disk cleanup or with updates causing it to be unable to start up. I can ignore the netflix problem, and WINE has made things easier in other ways, but this issue is the only one preventing my Ubuntu experience from being great. I've read about suspend bugs where Lynx doesn't suspend, but this isn't that, its that the fan controls don't work until the bios has to step in. I've tried to work with Toshiba Utils and still wasn't able to change it.
Is there a way to force the fan to come back on automatically after suspend? I don't mind it running loud if it protects the machine, I would prefer that it works at all.
I have a web server running on my laptop(in fact , it's a netbook). But I found it always hibernate automatically in a certain time .(In fact , I don't know what's the differences between hibernate or suspend. So I call this hibernate instead.) I am sure I have disabled the hibernate function in Power-Management from the System menu. But it still hibernates as usual.So could someone tell me how to disable it ( suspend,hibernate whatever )?
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
I can Suspend or Hibernate my Gateway notebook but I have no idea how to wake it up.The power button is set to suspend or hibernate....I not sure which it does, but I can't wake the computer up.
which ubuntu log file records when a suspend happened?I was ssh'ing into my ubuntu box periodically yesterday, when I discovered that it was no longer reachable. On getting home last night I discovered that it was still switched on, but I think in suspend mode as moving the mouse brought it back to life. The clock however, still showed 12:15pm, which is roughly when I stopped being able to ssh to it. I'd like to see the logs to confirm this.
My Ubuntu 10.10 on my laptop Lenovo T400 is not able to suspend or hibernate. Whenever I click Suspend or Hibernate in Startup options of the OS: * the moon LED on the bottom of the lid flashes a few seconds, the screen quickly shows something like "some devices fail to suspend, error 5", * and then the moon LED goes off and the display still has ambient light illumination. I suppose in suspend or hibernation state, the display should have no illumination, just like when the laptop is turned off, right? * If I press any key, the unlock screen dialogue will pop out. I have installed 'acpi-support' and 'hibernate 1.99-1.1'. But I don't know how to use these methods to suspend or hibernate my OS. Are they by commands in terminate, or can they be called by clicking Suspend or Hibernate in Startup options of the OS? For example, I type the hibernation command and it shows something is missing although I have installed "tuxonice-userui" ( I don't know if it will provide Tuxonice binary signature file):
When I suspend my computer, everything resumes fine... but the sound. The sound actually still works for the internal speakers, but not anymore for any jack-plugged headset or speakers. If I reboot, it works again. I also see nothing in the logs (dmesg, /var/log/messages).
These two commands return the same thing before and after resuming:
As it was recommended a lot when I googled it, but it seems that the alsa bin/script is not available on debian. It tells me repeatedly to install alsa-base, which was already installed. The following commands have been run one after the other, in that order:
Code: Select allroot:~# alsa force-reload
The program 'alsa' is currently not installed. You can install it by typing:
apt-get install alsa-base alsa: command not found Code: Select allroot:~# sudo apt-get install alsa-base Reading package lists... Done Building dependency tree Reading state information... Done alsa-base is already the newest version.
[Code] ....
How to prevent me from rebooting each time I need sound after suspending my computer?
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and invoke-rc.d gmd3 stop invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
I installed the debian 6 on the tninkpad T42, use the Suspend,it can entry the suspend state,I type the key let it come back, it can exit the suspend state, But the screen always display "black",can't come back the X window.
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[ 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect) I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
I found that the solution was to do: pmi action hibernate
But when I typed in that, it showed: Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Hal was not provided by any .service files
I have fedora 13. What is the difference between suspend and resume? If I suspend, how do I turn on the pc? If I hibernate, how do I get out of hibernation?
I think it might have to do with an app I installed called Jupiter (http://sourceforge.net/projects/jupiter/) that missed with my power configs, I removed it but I still can't hibernate or suspend. Whenever I try to do either, my screen fades to black and nothing happens. If I move the mouse or touch the keyboard, it comes back.
I just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.