Software :: Find Blocks Of An Inode?
Jan 28, 2011I cant see the inode number of a file by running
ls -i <file>
How can i see the blocks where this inode points to? I'm talking about a yaffs2 partition.
ADVERTISEMENT
Debian :: Error (device Hde1): Ext3_get_inode_loc: Unable To Read Inode Block - Inode=2375715
Mar 25, 2010I decided to take an old Gateway that I bought off a guy cheaply and turn it into a file and web server.I purchased copies of Debian 5.0.4 i386 disks (31 in all) on the advice of a friend, the disks weren't expensive, but now that Ive installed all the disks, I'm having a variety of errors
[443.110940 end request: I/O error, dev hde, sector 76021855
[443.111074] EXT3-fs error (device hde1): ext3_get_inode_loc: unable to read inode block - inode=2375715, block=9502724
INIT: cannot execute "/sbin/getty"
[Code]..
General :: Find Inode Of A Particular File Using Its Number?
Nov 16, 2010Can we find the inode of a particular file using its inode number?
The reason is i want to know how many blocks are occupied by specific file.
if we consider block size of 1K.
if the file size is of 100 bytes. In such a case, when the file is
stored on disk, the file will occupy 100 bytes or 1K (since we have
choosen block size to be 1K) ?
General :: Can't Find Bad Blocks List
Jan 6, 2010I've got a new hard drive, formatted it to ext3, and made a check for bad blocks using e2fsck.
It gave me this:
Quote:
I just would like to know where i can find how many bad blocks were found (perhaps one if it is using singular in sentence "Updating bad block inode."?), and what is/are the number(s) of located bad block(s).
Fedora :: Test Harddrive In Order To Find Bad Blocks?
Aug 15, 2010What software can be used to test harddrive from linux in order to find bad blocks, fix them, etc.
View 14 Replies View RelatedOpenSUSE :: Couldn't Find A Code::Blocks Download For 64 Bit On Their Site?
Feb 21, 2011I couldn't find a Code::Blocks download for openSUSE 64 bit on their site, does it exist or should I just go with another C++ compiler?
View 5 Replies View RelatedUbuntu :: Resize2fs: "inode Is From A Bad Block In The Inode Table"?
Jul 9, 2010I was using gparted from a live usb to resize an ext4 partition and it failed while running resize2fs. The error it gave was
Code:
resize2fs: The inode is from a bad block in the inode table while trying to resize /dev/sda5
please run 'e2fsck -fy /dev/sda5' to fix the filesystem after the aborted resize operation.
[code]...
Fedora :: F11 - How To Reduce Inode Usage
Sep 2, 2009I am running into a scenario where inode utilization (df -i)on a partition is 100% I want know
1) Is there a better way to list the total count of all files in a partition and just display total number of files in each directory in that partition I can get approx total for the entire partition by following commands
ls -Rla | wc -l
find -type f | wc -l
whereas ls -Rla gives too lengthy outptut with all the files in each directory
2) How to know inode utilization for each user or system account? There is huge number of files and how to remove it
General :: Effect On Inode While Resizing The LV?
May 22, 2010In Linux when we resize the partition with the logical volume(LV), how is the inode adjusted?
View 1 Replies View RelatedUbuntu :: How Does Filename Gets Mapped To Its Inode
Mar 7, 2010How does a filename is mapped to its inode ??? If I want to make our own system call and use a filename as argument how can I get its inode ,if I want to use some of member of inode structure in code. Basically I want to get the fd of the file.
View 5 Replies View RelatedGeneral :: View A File With Its Inode Nno?
Nov 2, 2010how can we view a file with its inode nno . eg. cat 12456 where 12345 is the inode of a file
View 3 Replies View RelatedGeneral :: Where Is Inode Table In Ext3
Mar 16, 2010Where is the inode table located in ext3 file system ? How can I read the entries in it ?
View 4 Replies View RelatedServer :: Root Inode Is Not A Directory?
Nov 25, 2010The filesytem is (or was ) 500Gb ext3. We had a small electrical power failure yesterday, the server do not stop but the disk array (SCSI Raid 5 disk system) restarted. This morning, the filesystem was not available (I/O error) so I reboot the front end. The fsck failed with the message: root inode is not a directory There are nearly 400Gb of data on this filesystem. Any idea to solve the problem ? Google always point to a commercial software or windows software...
View 2 Replies View RelatedUbuntu :: Add New Attribute To Inode Structure?
Feb 3, 2010In my project, there is a requirement for adding one more attribute for file properties which keeps track of previous file copies(Copy history).
So how can we accomplish this?
can we add/store this information in inode structure?
Fedora :: Error - Ext3_get_inode_block: Bad Inode Number
Dec 16, 2009I am getting this error every night at 4am (right about when the cron.daily runs). when it does this, it remounts the filesystem read only. In the AM I get yelled at by users. all it takes is an fsck to fix the problem, but it does it every night. I have tried to rebuild the journal by removing the has_journal flag, running an fsck, and then re-adding the journal... same problem.. and its always the same inode.
View 2 Replies View RelatedUbuntu :: Recover File - Don't Know The Inode Number Of It?
Jan 3, 2010How can i recover a file if i don't know the inode number of it? Is there a way of scanning the hard drive for inodes that has no reference?
View 1 Replies View RelatedDebian :: Recover A Deleted File From Its Inode?
Aug 8, 2010I was wondering if it was possible to display inodes of deleted files using a command. If yes, is it possible to recover the deleted files from their inodes?
View 1 Replies View RelatedGeneral :: Loop Through A DIR To Delete Files By Inode
Feb 9, 2010I have a directory that contains some files (over a 1,000) that have a '' in the filename. There are also some good files that I need to keep. therefore I need a script to delete based on inode.
What I have thus far:
list="$(ls -il /opt/PC/log/*RPOUT*.xml)" #this gives me the list
# I need to get the inode of.
for i in $list
do
find . -inum $i -exec rm -i {} ;
echo "delete file" $i >> /home/me/tmp/del_inode.txt
done
echo 'completed'
I know this is not right ... what I know is is the 'find' is. I need to loop through the $list gleaning inodes to get all the files with '' delete. I'm not sure how. The $i gives me the whole line. I just want the first position. set $() does not seem to work ...
General :: Resize2fs: Can't Read Next Inode While Trying To Resize
Jan 19, 2010I'm currently in the process of remove a drive from an lvm. I am following this guide
[URL]
and to be honest I have also posted this question at [URL] but I have a fair amount of data at stake here and really need to make sure I'm acting safely. This is certainly not a place to button mash or guess.this is the 2nd drive that I am removing, the first one went off without a problem.However, I just received this error
Code:
resize2fs: Can't read next inode while trying to resize /dev/vg0/lvol0
and I'm not sure what it means or where to go from here. The entire output is
Code:
root@dude:/mnt# resize2fs -p /dev/vg0/lvol0 4466524456k
resize2fs 1.41.4 (27-Jan-2009)
Resizing the filesystem on /dev/vg0/lvol0 to 1116631114 (4k) blocks.
[code]....
Programming :: Finding A Number In Windows Like The Inode
Aug 19, 2010anyone know that the ntfs's file sytem struct? is there's a API or something other could let me get this number? Or there is actually no such number in windows like the number of inode in linux?
View 1 Replies View RelatedDebian :: Copy Partition And / Or Convert Inode Size
Mar 1, 2016I think I basically need to know whether it's possible to copy a partition whilst converting inode size, or if I need to create a new partition and copy the contents.
To give you the back story..
I have a system with 1 SSD and a raid array of 4 physical disks. One of the raid disks died, so I swapped it out, only to find the system wouldn't boot (had no bootloader?). I fired up a live session, and tried grub-install, but get an error like "The file /boot/grub/stage1 not read correctly". Looking into it, it looks like the problem discussed here which is basically something to do with the partition having an inode size of 256 instead of 128.
Taking a step back for a moment.. I can't really remember installing this system, but is it possible I partitioned the SSD to ext4, with a default inode size of 256, then when the installer tried to install grub, it basically refused to install it on the SSD, so offered to install it on one of the raid disks, which happens to be the disk that died? So until now, unbeknown to me, the bootloader has been on one of my raid disks, while the root (bootable?) partition is on the SSD. That's my best guess as to what's gone wrong anyway..
Anyhow, currently this system has the SSD with the small bootable partition with an inode size of 256. As luck would have it, the new raid disk is sitting there not doing anything yet, so I have the space needed to copy that partition or it's contents onto the new raid disk.
So the question is, can I convert the inode size whilst copying the partition? Or do I need to just clone the partition, then create a new one with the correct inode size, then copy the contents of the old partition to the new one? In the latter case, is there any hidden secret sauce that won't be copied with `cp -R` or so? I mean, if I just create a partition with the correct inode size, and flag it bootable, then `cp -R` from the old partition to this new one, will it be functionally the same? or is there something special I need to do because this is the root OS partition?
Fedora Servers :: Increase Inode Number On Ext4?
Jun 3, 2010i have a slave disk with some data formatted in ext4 , now i have 95 % of inode used ( and 50% of used space )how can increase inode ?
View 5 Replies View RelatedGeneral :: Remove A File On System Using Inode Number?
May 19, 2010If you create a file on UNIX/linux with special chars, like touch "la*, you can't remove it with rm "la*. You have to use the inode number(you can if you add the before the name, I know, but you'd have to guess as a user that it was used in the file creation).
I checked the manpage for rm, but there's no metion of the inode number. Doing rm inodenumber doesn't work either.
What is the command for this?
Ubuntu :: Xfs Inode Flush Bugs - Threat Or Menace?
Jul 1, 2010I was rather intrigued by the large number of xfs bug fixes in the recent kernel update for Lucid.
Code:
aptitude changelog linux-image-2.6.32-23-server | grep -c xfs:
20
20!
Poking around reveals that one Dave Chinner, Principal Engineer -- SGI Australian Software Group, submitted a series of patches to deal with preventing the flushing of stale inodes. I'm trying to figure out just how relevant those patches are to the stability of XFS, especially to pre-Lucid Ubuntu systems: are they in danger of data loss? Some quick search results thrown together in an effort to asses this issue:[URL]..Quote:
Dave Chinner (9):
xfs: Don't flush stale inodes
xfs: Ensure we force all busy extents in range to disk
xfs: reclaim inodes under a write lock
xfs: Avoid inodes in reclaim when flushing from inode cache
[Code]...
Programming :: Getting Error While Accessing Inode Structure Member / Why Is This?
Dec 16, 2010I have added new member "i_mymember" to inode on-disk structure in ext3_fs.h file and tried to access this in userspace program, but gives me error that "error: �struct ext3_inode� has no member named �i_mymember� "
I have compiled my kernel source code.
why this error is coming ...?
Ubuntu :: Ext4 Block - Inode Count Wrong ?
Jun 28, 2010I'm running a small development server on Ubuntu 10.04 server 64 bit with ext4 as the File system type.
I keep on getting wrong block / inode size when I do an fsck:
Code:
I then force an fsck and the problem is solved, but given a day or two, the problem is back. This can sometime consume up to 10G of my HDD space.
Code:
General :: Disk Image Starting At Specific Inode?
Mar 9, 2010I deleted some files on the command line and would like to learn if it's possible to recover them. It's not a terrible thing if they are gone, but I want to see what I can do. The server is configured as a hardware RAID5+1 (ext3, Debian Stable) and I *really* don't want to take a dd of the entire disk.
ls -id gets me the inode value of the directory(155655)
I'd like to create a disk image starting at that specific inode. Then there is the issue of picking an outer boundary of the disk image. I'm hoping there's a dd/ext3 genius out there to advise.
Hardware :: Ext2_get_inode: Unable To Read Inode Block
Jul 21, 2011[code]...
server2 kernel: EXT2-fs error (device sdc1): ext2_get_inode: unable to read inode block - inode=44998281, block=89981174
[code]...
General :: Use Inode Hook Functions(inode_alloc_security And Inode_free_security)?
Mar 4, 2010how to use inode hook functions(inode_alloc_security and inode_free_security)?
View 1 Replies View RelatedProgramming :: Traversing Inode Linked List In 2.6 Kernel?
Jan 19, 2011I would like to complete inode information from the struct list_head structure of super block structure of vfs.System call are doing operation internally, but no system call to traverse?
View 1 Replies View Related