The filesytem is (or was ) 500Gb ext3. We had a small electrical power failure yesterday, the server do not stop but the disk array (SCSI Raid 5 disk system) restarted. This morning, the filesystem was not available (I/O error) so I reboot the front end. The fsck failed with the message: root inode is not a directory There are nearly 400Gb of data on this filesystem. Any idea to solve the problem ? Google always point to a commercial software or windows software...
I decided to take an old Gateway that I bought off a guy cheaply and turn it into a file and web server.I purchased copies of Debian 5.0.4 i386 disks (31 in all) on the advice of a friend, the disks weren't expensive, but now that Ive installed all the disks, I'm having a variety of errors
[443.110940 end request: I/O error, dev hde, sector 76021855 [443.111074] EXT3-fs error (device hde1): ext3_get_inode_loc: unable to read inode block - inode=2375715, block=9502724 INIT: cannot execute "/sbin/getty"
I was using gparted from a live usb to resize an ext4 partition and it failed while running resize2fs. The error it gave was
Code: resize2fs: The inode is from a bad block in the inode table while trying to resize /dev/sda5 please run 'e2fsck -fy /dev/sda5' to fix the filesystem after the aborted resize operation.
I've just discovered that crontab is creating a new file in the root directory every time it executes a cronjob, and it doesn't erase over the old file so there are thousands of files in the root directory, they have the same name as the script file (appended with a numeral) but are all blank.here is what one of the cronjob's looks like[URL]
I messed up the first installation of Fedora on my server. My setup is as follows: Fedora and Gnome - NFS system, No dual boot (Windows or anything) Fedora ISO DVD downloaded No kickstart or other tools. how to set this up, from the time I insert the disk and have it boot up (configged already to boot from it). I know how to wipe it clean at intall time. Is that the root directory? And, is /boot the actual boot directory? I'm just having a hard time uderstanding that. As I said, I just want a quick itemized list, step 1, step 2, etc, from partitioning, creating file system, mounting, etc. in the right order.
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
I run ProFTPd with TLS authentication on my Debian Lenny server. My problem is that despite of the fact that my users connect chrooted, one of my friends had root privileges after logging in form a Macintosh and could browse the root directory, too.
I have a machine which has only /opt with some decent amount of space where I can install a software. /opt belongs to root:root. The software I want to install cannot be installed as root user.
So lets say I create a directory called /opt/install1 and then chown -R install1 to belong to user1. And now I install the software under /opt/install1 with user as user1.
Is this a best practice violation? There could potentially be just /opt/install1 belong to user1 and in future everything else created under /opt belonging to root..
I have a 14TB raid, file system is read-only and I am trying to run e2fsck -B -p -C -v -y /dev/sdb1, it goes through, but fails and says bad block/inode or fails to transfer, something like that.Is there a way I can get this to run successful, this is a production storage server, its critical.
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/ mount: no type was given - I'll assume nfs because of the colon mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
I've started to get emails that would typically come from [URL] as [URL]. These emails come from services that send out emails (backup programs) directly, or from cronjobs. I've logged in as the non-root account and either sudo su - or su - to root and the restart the service at one point or another. If I login directly as root and bounce the service or cron the emails come across as from root. I don't see anything in my environment variables after I su to indicate what would cause this. I'm not sure where else to look? A pam setting? This seems to have happened between Fedora 10 and 14 (did a bunch of overdue upgrades recently) I've only got Fedora so I don't have anything to compare to. In Fedora 10 I did not have this problem.
I m having a RHEL-5 sever.ABC directory size is 57GB after taking backup in the same disk with name ABC.bkp showing 56GB. i used below command to copy/backup. # cp -r ABC ABC.bkp (different sizes after copying)..I checked both the directory sizes by #du -sh <ABC> and du -ks <ABC.bkp>In both GB and KB there is lots of difference (200mb). why this will happen in copying? what is the solution for above question? what is the correct way of copying 1dir to newdir exactly?
I'm using OpenSSH 5.5p1 on Fedora 15. I'm trying to get a chrootDirectory to work. Specifically trying to figure out why I can't write files to a sub-directory of the chroot directory. I created a user test_user and created a group called sftp. I added test_user to the sftp group. I edited /etc/ssh/sshd_config as follows:
Code:
Subsystem sftp internal-sftp Match group sftp ChrootDirectory /home/sftp_users/%u X11Forwarding no
Tell me how I can I login as root?I want to get root privileges in www directory because I have a web server and I want to put there my site and I can not do that
I am using fedora 12. I got "no space in root directory" warning from the system. When I went through it, I found many of the space has been occupied by /var/log/httpd/error-log file. So I just deleted the file but when I check the space with "df -h" command. It shows 0% availability. The same problem occurred before but it solved when I restarted the system. But how to regain the space without restarting the system?
I have a little problem extracting or making any files in root directory.I'd like to extract invoicing software to /opt and /usr directory and run the software from there. It's possible only as root
how the kernel knows the root directory. For example, in grub menu.lst file we specify root=/dev/hda1. This tells the kernel to find mount the root directory from /dev/hda1. But to read /dev/had1 it should first know where is '/' . I couldn't understand how this is being done.
I deleted a bunch of things with root (old home folders) but now I can't empty the trash....where is the directory that the root trash goes to? I'll do a terminal delete from there but I can't seem to find it.
How the kernel knows the root directory. For example, in grub menu.lst file we specify root=/dev/hda1. This tells the kernel to find mount the root directory from /dev/hda1. But to read /dev/had1 it should first know where is '/' . I couldn't understand how this is being done.
I am using fedora 12. i got "no space in root directory" warning from the system..when i went through it, i found many of the space has been occupied by /var/log/httpd/error-log file. so i just deleted the file..but when i check the space with "df -h" command.it shows 0% availability..the same problem occured before...but it solved when i restarted the system..but how to regain the space wihtout restarting the system?
I have assigned 4G for my "/" directory, on slacware 10.2, and have not installed the GUI either. I am not sure what files to look for that have been growing over time that has completely depleted my space. Think it would be log files, but don't know where to find them.
I am using fedora 13. When I list the root directory with the command: 'ls -la'. I see the parent directory symbol as '..' So, which is the parent directory for root directory?
I installed Slackware 13.37 and when i configured the LAMP, I now have a file session_mm_apache2handler0.sem in root(/) directory. I searched in the internet and found this:
I am trying to get apache to start at boot in Fedora 10 but I am getting "Document root must be a directory", I tried to change the Selinux settings with: chcon -R -h -t httpd_sys_content_t /www
I checked the new settings with ls -aZ and the changes apear to be fine. apache apache unconfined_u:object_r:httpd_sys_content_t:s0 But I still get the same message on my boot.log file.
