anyone know that the ntfs's file sytem struct? is there's a API or something other could let me get this number? Or there is actually no such number in windows like the number of inode in linux?
View 1 Replies
Does anyone know how to get the path with a inode number by C programming?
Or can I get the absolute path without giving a "path" but a inode number by C?
like this: get_path(unsigned inode);
not such this function: getcwd(".", xxx);
taowuwen@gmail.com
I am getting this error every night at 4am (right about when the cron.daily runs). when it does this, it remounts the filesystem read only. In the AM I get yelled at by users. all it takes is an fsck to fix the problem, but it does it every night. I have tried to rebuild the journal by removing the has_journal flag, running an fsck, and then re-adding the journal... same problem.. and its always the same inode.
View 2 Replies View RelatedHow can i recover a file if i don't know the inode number of it? Is there a way of scanning the hard drive for inodes that has no reference?
View 1 Replies View RelatedCan we find the inode of a particular file using its inode number?
The reason is i want to know how many blocks are occupied by specific file.
if we consider block size of 1K.
if the file size is of 100 bytes. In such a case, when the file is
stored on disk, the file will occupy 100 bytes or 1K (since we have
choosen block size to be 1K) ?
i have a slave disk with some data formatted in ext4 , now i have 95 % of inode used ( and 50% of used space )how can increase inode ?
View 5 Replies View RelatedIf you create a file on UNIX/linux with special chars, like touch "la*, you can't remove it with rm "la*. You have to use the inode number(you can if you add the before the name, I know, but you'd have to guess as a user that it was used in the file creation).
I checked the manpage for rm, but there's no metion of the inode number. Doing rm inodenumber doesn't work either.
What is the command for this?
I decided to take an old Gateway that I bought off a guy cheaply and turn it into a file and web server.I purchased copies of Debian 5.0.4 i386 disks (31 in all) on the advice of a friend, the disks weren't expensive, but now that Ive installed all the disks, I'm having a variety of errors
[443.110940 end request: I/O error, dev hde, sector 76021855
[443.111074] EXT3-fs error (device hde1): ext3_get_inode_loc: unable to read inode block - inode=2375715, block=9502724
INIT: cannot execute "/sbin/getty"
[Code]..
I'm using ubuntu 9.04; I have a large project in windows that I want to "port" it in linux.
It uses IPC mechanism "Shared memory" and also "Critical Section" APIs in windows, but unfortunately I have no good reference to change these windows APIs to their equivalent in linux?
Is there a comprehensive documentation or reference for this issues? I mean a table containing the equivalent APIs or systemcalls in windows and linux! For example, what's an alternative for the "InitializeCriticalSection" API in linux? Or an alternative for "CRITICAL_SECTION" structure? Or even an alternative for "RegOpenKeyEx", although we don't have registry in linux!!
how to find a free X display number?
I am using Xephyr to create a windowed session for logging in as another user. It needs its own X display, though. Obviously I can just give it :1.0 and hope for the best, that it would be better to identify the first free display and use that.
But I don't know how...
I have added new member "i_mymember" to inode on-disk structure in ext3_fs.h file and tried to access this in userspace program, but gives me error that "error: �struct ext3_inode� has no member named �i_mymember� "
I have compiled my kernel source code.
why this error is coming ...?
I would like to complete inode information from the struct list_head structure of super block structure of vfs.System call are doing operation internally, but no system call to traverse?
View 1 Replies View RelatedWhich linux tool can find out mainboard serial number?
View 5 Replies View RelatedI tried to come up with a thread title that was specific without being too long or cryptic. Don't think I succeeded. In my PHP error log I keep getting this error over and over again:
Code:
EntityRef: expecting ';' at line 565, column 81
It's very odd to me that it doesn't contain any sort of stack trace or file info. I know which of my virtual hosts and therefore which directory it's coming from, and it's happened now on half a dozen different servers that this site has lived on. So obviously I'm trying to track it down and add the missing ';' to the right file. This directory has dozens of sub-directories and hundreds of files though.
This is the best I've managed to come up with so far:
Code:
find . -type f -iname "*.php" -print -exec awk 'NR==565' {} ;
(I've run it both with and without the -iname filter.)
I get a very large list of files, and some of them display the contents of line 565 after them. I've checked through a number of them there, but haven't found the culprit. Is it possible to limit my "find" command to only files that have at least 565 lines? Is it possible to have it only print matches from line 565 that has at least 81 columns? How would I modify that to print perhaps 5 lines on either side (in case the error reporting is pulling a slightly different line.)
I'm constantly going 'cd ../../../../'. Is there a command/alias that could let me go 'cmd 4' and I'd be taken back 4 directories?
View 8 Replies View RelatedI was using gparted from a live usb to resize an ext4 partition and it failed while running resize2fs. The error it gave was
Code:
resize2fs: The inode is from a bad block in the inode table while trying to resize /dev/sda5
please run 'e2fsck -fy /dev/sda5' to fix the filesystem after the aborted resize operation.
[code]...
I have some code that opens a directory and reads in the names of files which are e.g. 0001, 0002, 0003 up to 9999I need to get all these numbers and then generate a new number that is not one of these numbers already.here is my code to check the files in the directory
DIR *d;
struct dirent *dir;
int i = 0;
[code]....
But what is the easiest way to figure out the Unicode number of a character when you already have the character?
For instance, I pasted this character here from a PDF:
Anybody knows How can I get the number of cores of a machine?I know that I can use POPEN and get the stream of this:
Code:
grep -i 'processor' /proc/cpuinfo | wc -l
But, I think that a simple method to do this.
i want to generate random number in c programming from -1 to 1
View 1 Replies View RelatedI got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
1) I need to search a field value to check for exact 0. If the number is 0, it should throw error.
The line to be searched looks like as below. "Output Rows [1], Affected Rows [1], Applied Rows [1], Rejected Rows [0]"
Here I have to search whether the affected rows is 0. But the code below picks up other values also (lie 10, 20.. etc). How do we write to get an exact match for 0? Code: affected=`echo ${line} | cut -f6 -d" " `
affectedcount='echo ${affected} |grep 0 ` 2) Also, I need to check whether the rejected rows > 0
Code: rejected=`echo ${line} | cut -f12 -d" " `
rejectedcount='echo {rejected} |grep [1-9]`
3)Can we combine these two statements in a better way to get the desired results?
I've created (as a homework) to create as many folders as told but I still need to check if the variable is a number or not :
Code: #!/bin/sh
echo "Veuillez saisir un nombre"; read nmbr
nmbrf=$nmbr
while [ $nmbrf -gt 0 ]
do mkdir -p "foo$nmbrf"
nmbrf=`expr $nmbrf - 1`
echo "$nmbrf"
how do I check that nmbr is a number or something else?
I try to get the absolute value of a floating number but i could not until now. I am using bash script btw.lets say A is a floating number:A=-0.125
Code:
absA=$(echo '$A' | nawk '{print ($1>=0)? $1:0-$1}')
the above code gives absA=0, whereas
[code]....
I'm having a hard time trying to get the number of digits in a uint64_t variable. The reason I'm using this is I want to make sure I get x amount of digits inside of a variable before I use it, but since the higher the digits, the better the program is.I currently use the following code, and it works, but my loop will never exit because the length is always 0:
Code:
/**
* numbdigits()
* number: The number to evaluate [in]
*
* Returns the number of digits found in a number.
[code]....
getrand() returns a uint64_t as well (and works). The only way the while() loop ends without my intervention is if I do curd += numdigits(val) instead...but, that gives a false value as well.
I have a char*[] array:
Code:
char* myarray[] = {"Hello", "there!", "LQ"};
and I wish to use/ write a function to find the number of elements in myarray (in this case, its 3).
*equivalent of .NET's array.size() that returns number of elements in array
How do I achieve it?
I have a text file that contains the following string of numbers and letters:
Code:
Mean track length: 3.45 +/- 1.23 mm
or
Code:
Mean track length: 22.45 +/- 12.23 mm
In the first example, I would like to grab only 3.45 and write it into a new file. Then I would like to grab only 1.23 and write it into another file.
I have 80,000 files to do and those numbers can be different every time.
I want to be able to run a piece of AWK code on a record specified by number, not by a regex.
View 6 Replies View RelatedUser submits a ms word file, and the php can recognize the number of words? Is it only possible for ms win server?
View 1 Replies View RelatedHow can I know what number descriptor is used by my usb device indicate via libusb_device_handle structure ? I can't find declaration of libusb_device_handle structure. I need this information to use poll() function where I need decripttion number of device.
View 1 Replies View Related
