Software :: Can't Connect IReport To SQLite3 Database
Aug 13, 2009
I am trying to replace my Widows work station with Linux, I am now down to two applications. One is close to being resolved (it's a hardware connector between two pieces of equipment) and the other is replacing Crystal Reports with JasperSoft iReports.
I have been progressively hammering away at this for several months now. And still no progress. All I need to do is connect the stupid report software to my SQLite database.
Now, no I cannot move to another database. This is the solution I have and that's it. I know someone will suggest MySQL or some other db... not in the cards not in this time frame. I have over a year invested in the application/database and have already deployed it for use. And I just don't have the time needed to re-write my application to connect to another database then move all my tables and data over to another database then go through the entire testing cycle again. Okay I think that horse is dead and the position clear.
System Specs:
OS: OpenSuSE 11.0 x86_64
Desktop: KDE 3.5.9 "release 49.1"
CPU: AMD Athlon 7750 Dual-Core
Drives: 3 SATA
[Code].....
And it shows up in iReport after I point to it... but then I get this error from iReport when I try to connect to my DB.
"Unable to add connection. Cannot establish a connection to using org.sqlite.JDBC (Unable to find a suitable driver)."
I have been all over the web and haven't found any clear instructions or directions on where these drivers are stored, how to properly add a driver or how to connect iReport to SQLite... and according the iReport web site I can...
View 14 Replies
ADVERTISEMENT
Jun 29, 2010
I have such trouble with YUM:
$ sudo yum update
Total 807 kB/s | 192 MB 04:03
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Traceback (most recent call last): .....
File "/usr/lib/python2.6/site-packages/yum/sqlutils.py", line 166, in executeSQLQmark
return cursor.execute(query)
sqlite3.DatabaseError: database disk image is malformed
I already try clean yum cache and remove checksum data, rebuild rpm db, check / partition,
but no luck, problem still occurs.
View 8 Replies
View Related
Jun 16, 2011
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
[code]...
View 10 Replies
View Related
Jan 16, 2010
I have a strange thing happening when I use the sudo command. I'm getting "Could not connect to database" every time I use the sudo command.I don't have the slightest clueThe sudo command works but it gives this phrase.
View 9 Replies
View Related
May 20, 2010
Just upgraded to 10.04, trying to watch a dvd and it doesnt work. so i go to the ubuntu website, download the required pack (ubuntu restriced extras)
And then type in the code:
Code:
when i do this, terminal keeps trying to connect to a database, but it is not able to, see below....
Code:
Im at university and sitting behind a proxy. however, i had no problem doing this with ubuntu 9.10 and i can access internet, update, software centre ect...
View 4 Replies
View Related
Nov 16, 2010
I'm trying to connect to a remote database but can't connect directly (I think due to security reasons). Here's the setup:
Computer A - my computer
Computer B - server, I can SSH to this from computer A
Computer C - server that runs database, I can SSH to this from B but can't from A
Any ideas how I can can connect to C directly from A? I think I need to setup a tunnel or something like that but I can't figure it out.
View 3 Replies
View Related
Mar 14, 2009
I'm using Kubuntu 8.04 and now I've installed OpenOffice 3, both in Spanish.I have oracle client installed and can connect to Oracle databases with clients like tora.What I try:
- Open Database and select connect to an existing database.
- Select Oracle JDBC.
- Next
- DatabaseName: I put the sid of the database of oracle. (orcl)
Server URL: The name of the server containing the database. It's resolved by a ping. (database.organization.es)
Port: 1521
- Oracle JDBC Driver:
oracle.jdbc.driver.OracleDriver
But I press the test button, I receive an error: JDBC Driver can't be loaded (really, the message is in spanish).
View 2 Replies
View Related
Jul 9, 2009
I have two VMs, one as a web server and one as a database server. Both are RHEL5.2 Web server httpd-2.2.3-22.el5_3.1 php-5.1.6-23.2.el5_3 Database server mysql-5.0.22-2.1
On the web server, I can connect to the database just fine with a user I created with all privileges on *.*
Both phpMyAdmin and Drupal, though, tell me they cannot connect to the database. phpMyAdmin says :#2003 - The server is not responding..Drupal says:Failed to connect to your MySQL database server. MySQL reports the following message: Can't connect to MySQL server on '172.16.1.1' (13).However, I can also connect to the database with a simple little PHP test script.What do I need to do to get these apps to see the database that is up, running, available, reachable, in existence, etc. etc???
View 3 Replies
View Related
Aug 15, 2011
upon boot I see Starting Clustered TB : ctdb failed! Starting system message bus: dbus Could not connect to database Starting MTA: exim4 startpar: service(s) returned failure: ctdb ... failed!
View 1 Replies
View Related
Apr 28, 2011
how to connect the database to proxy server.example:: this is the acl in squid.conf to block the website.the keyword that want to block store in file .txt
acl block_advertisers urlpath_regex -i �/etc/squid/
block_advertisers.txt�
acl block_entertainment urlpath_regex -i �/etc/squid/
[code]...
a bit info, the data that stored in database is a keyword to block the website if a keyword in blacklist match with the url that want access by user. if match so then the user cannot access the website.
View 6 Replies
View Related
Apr 21, 2010
how to connect to mysql database using php in Apache on Ubuntu?
View 4 Replies
View Related
Mar 3, 2010
How to connect my mysql database server from outside network. because its locally works and i cant able to connect from outside and different networks. when i try i am getting like this error.
ERROR 2003 (HY000): Can't connect to MySQL server on '123.136.126.179' (113)
View 2 Replies
View Related
Sep 3, 2010
I've created a application,i tried to deploy in JBoss application server..that application working fine.so i tried to run my allication in apache web server,i have done some configuration in apache & installed apache-tomcat connector also..its working fine.but i will try access next page its showing error.
View 1 Replies
View Related
Jan 27, 2011
I'm creating a comment form for a website but when I try to connect the page with a database it gives me a parse error. here are the codes I wrote:
[Code]....
View 1 Replies
View Related
Oct 19, 2010
My boss has suggested installing the unixODBC driver in one of our Red Hat 5 servers in order to connect to a Microsoft SQL/SERVER database (Windows server).
View 1 Replies
View Related
Sep 5, 2010
I'm trying to write a simple program c++ to connect to Mysql database based in my 127.0.0.1 server:
int main (void) {
cout << "33[2J" << "33[0;0f";
MYSQL mysql;
MYSQL *conn;
[code]....
View 2 Replies
View Related
Jun 7, 2010
I have a little C++ program that I am attempting to connect to a test database.
#include <iostream>
using namespace std;
#include <sqlite3.h>
int main ()
{
int rc;
[Code]....
When I compile this code, I get the error: undefined reference to `sqlite3_open' I added sqlite3 package using the command 'apt-get install sqlite3'. Unfortunately the sqlite3.h header file was not installed in /usr/include, so I downloaded the SQLite3 dist., untarred it and copied the sqlite3.h file to /usr/include. I saw on a previous message that I would need to link the library. The only library file in /usr/lib is libsqlite3.so.0, so the command g++ -lsqlite3 still gives me an error.
View 5 Replies
View Related
Mar 28, 2010
I'm trying to configure unixODBC on Linux rehat EL 5 32 bit to connect to an Oracle 10g database server. But when I retest the connection after the configuration then The error occurs:
# isql -v oralab4_dns vonphot vonphoto
isql: symbol lookup error: /usr/lib/libreadline.so.3: undefined symbol: PC
I have searched on Google.com for 2 days but I can't resolve the problem.
View 3 Replies
View Related
Aug 26, 2010
Trying to get OpenbavoPOS to connect to my remote Postgresql database, but so far i've only been able to connect to the local postgres installation. I _am_ able to access the remote databases with psql. I've read literally dozens of pages, and am pulling my hair out. I'm trying jdbc:derby.//192.168.15.10:5432/bravo I get back java.sql.SQLException no suitable driver found for jdbc:derby.//192.168.15.10:5432/bravo If I use jdbc:derby./root/bravo - all is OK, using a local database created in /root I have jdk installed on the client; does it need to be on the server also?
Server = CentOS 5.4 PostgreSQL version 8.1.21
Client = CentOS 4.8 PostgreSQL version 8.1.4
[code]....
View 1 Replies
View Related
Jun 7, 2011
When i try to open a connection to start querying i get this message:
Cannot Connect to Database Server
Cannot start SSH tunnel manager
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
View 2 Replies
View Related
Jun 16, 2010
I have been given a sql script with SQL commands in it to set up a new sqlite3 db. How do I run such a thing?
View 1 Replies
View Related
Mar 20, 2010
I am running Debian 5.0 (Lenny). I am trying to get Wordpress 2.9.2 to work with Sqlite3. I hear Sqlite is a better database server than MySql because it is lighter on resources and is much smaller. I am very new to Sqlite3, however, so I'm not totally sure what to do here. In my wp-config.php file (the Wordpress configuration file), I've set the database name and user name, and such. Now, I think I know how to create a database, but from that point forward, I'm lost. How do I add the password for Wordpress to access the database. By the way, I made a regular Unix user, called sqlite, for all Sqlite things.
View 1 Replies
View Related
Feb 22, 2010
I am using fedora 10, and everything was working fine till yesterday, i was using yum and my system is updated with yum update as well. Then yesterday i build new kernel from source 2.6.32, and today i boot with that kernel. Now my yum doesnt work.
it gives following error message.
Code:
[root@localhost Download]# yum provides libpulse
Loaded plugins: refresh-packagekit
rpmfusion-free
[Code]....
View 2 Replies
View Related
Jul 31, 2010
I am trying to connect to my mysql database using php but I am getting the error "Fatal error: Call to undefined function mysql_connect()".
I checked phpinfo() and there is no reference to MySQL. I believe this means that my install of PHP doesn't support MySQL. Do I need to uninstall and reinstall with a version of PHP with MySQL support? If so how should I do this and how do I get a version of PHP that supports MySQL?
View 2 Replies
View Related
Sep 11, 2010
Whats best way to compile and test Sqlite3 with DSQLITE_ENABLE_UNLOCK_NOTIFY?
View 1 Replies
View Related
Nov 22, 2010
i am trying to cross compile sqlite3 with following options(i got these options from previous threads in these forum)./configure --host=arm-linux CC=/usr/local/arm-linux/bin/arm-linux-gcc AR=arm-linux-ar STRIP=arm-linux-strip RANLIB=arm-linux-ranlib while executing make command i am getting following error
rm -fr .libs/libsqlite3.so .libs/libsqlite3.so.0 .libs/libsqlite3.so.0.8.6
/usr/local/arm-linux/bin/arm-linux-gcc -shared .libs/sqlite3.o -ldl -lpthread -Wl,-soname -Wl,libsqlite3.so.0 -o .libs/libsqlite3.so.0.8.6
[code]....
View 5 Replies
View Related
Jun 9, 2010
I am programming with TCL on Ubuntu Linux. I need to access a SQLite3 database. I loaded the SQLite3 package using sudu apt-get install sqlite3. When I try to open the database in TCL I get the error "can't find package sqlite3"
The line of code is: "sqlite3 db /home/lana/CAL_development/databases/CpRoutine.db"
I also have "package require sqlite3" directive in the program.
View 4 Replies
View Related
Sep 10, 2010
I'm new to database programming but I'm working in a project that makes use of sqlite3. I know I should #include <sqlite3.h> but it is not there.... i have just sqlite.h. can anyone tell me what to do to have the sqlite3 headers and start using them in my programs
View 9 Replies
View Related
May 6, 2011
Error: Cannot connect to the database because: INSERT command denied to user 'webuser'@'localhost' for table 'visitor'
[Code]...
View 3 Replies
View Related
Apr 5, 2010
I'm trying to set up a small web server with php and sqlite support. I installed lighttpd, php5, php-sqlite3 and php5-sqlite3. Then, I enabled sqlite and pdo extensions in php.ini:
extension=pdo.so
extension=sqlite.so
extension=pdo_sqlite.so
However, when I try to open a SQLite3 database from php:
$database = new SQLiteDatabase($myDB, 666, $error);
I get the following exception:
SQLiteDatabase::__construct() [sqlitedatabase.--construct]: file is encrypted or is not a database
Some readings in the net make me think that my php settings are not compatible with SQLite3 databases. Is anyone successfully working with SQLite3 databases from PHP5 under Debian? Have you any recommendations? Should I rebuild php maybe?
View 3 Replies
View Related
