Software :: Appletouch Not Being Recognized As Synaptics?
Mar 27, 2011
I'm trying to change some of the config options for my MacbookPro3,1 touchpad. I added the relevant lines in my Xorg.conf file but I'm getting an error that no synaptics touchpad is recognized and then the module is unloaded. This is the error:
I know it's an appletouch and not a Synaptics trackpad but on the appletouch driver site it says I should be able to configure it using the synaptics driver: [URL] Here's my xorg.conf file in case this helps at all. I created it by copy-pasting the synaptics secton from the appletouch driver site I posted above into my default xorg.conf.
trying to get debian working on an apple 12" aluminium powerbook from summer 2005. Right now, I am specifically trying to get the touchpad to work. Googling and searching the forums suggests that I need the appletouch module. I believe I already have this as it is now compiled into the kernel. I believe that I'm also supposed to get this to work properly with the synaptics driver. I've installed the synaptics input for X. I've also got pbbuttonsd though this doesn't seem to affect the trackpad even though there is a setting for it.
Right now, I can move with the touchpad but I cannot do anything else. I cannot tap to click and I cannot use, for example, two finger scroll. This is very frustrating because I'm so used to doing these things that I keep doing them expecting them to work any time I'm in a GUI environment!If I kill the display manager and x server and run Xorg -configure as root, Xorg always crashes so I've had no luck producing a base xorg configure file which I believe I probably need to edit.
I'm not currently using gnome. I've installed both lxde and xfce to see which I like best although I'm not sure this was wise because I'm confused about how to switch between them. When I tried ubuntu 10.04, the trackpad also partially worked. In that case, it was almost impossible to move with it, difficult but not impossible to tap and very easy to scroll. The trackpad works perfectly in os x so it isn't a hardware issue. (Ubuntu 10.04 ran like treacle even with no applications beyond gnome running - hence my not installing gnome.)
Debian's wiki has a (very, very brief) section on installing on a 12" powerbook which points to [URL] for powerbooks after february 2005 such as mine. But this page seems very out of date and to discuss an older version of the driver before it was included in the kernel. It also pre-dates support for airport extreme wifi etc. So it isn't helping much because I'm not sure what, if anything, might still be applicable.
Right now, pbbuttonsd tells me that it has no clients when I pass -listclients to the command-line interface. trackpad show says there is no trackpad. xfce's settings pane for mice shows a total of no fewer than four devices: my logitech mouse; the trackpad which it believes is another mouse; an xtest device of some sort; and mac mouse emulation. I'm not sure what the last two of these refer to.I realise as I write this that I'm not really sure what information might be relevant so if it is not included, perhaps somebody could let me know what I should add. Version of debian is stable (squeeze). PPC is a 7450 (G4 PowerMac 6,8) 1.5 GHz 512kB L2 cache 167 MHz bus with 1.25GB RAM.
I have an MacBook Pro 3,1 running Karmic ( 9.10 ) 64bit. The kernel is 2.6.32 patched to use the BFS scheduler. I am having issues with the touchpad and the keyboard. On occasion they stop working. It is possible that I have damaged hardware. However I would like to see if any other users report similar issues before blaming the HW. At the end of this message is what dmesg reports when this occurs.Often, before the touchpad and keyboard completely stop working they appear to stutter. They work fine then stop responding briefly then start working again.
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
and I didn't use anything else and didn't install any P2P client in Ubuntu. And then a few day later, my laboratory received the message that someone in our laboratory used P2P with prohibited in the university. The people in my laboratory pointed to me because they're all using windows only me using Ubuntu. So I would like to ask "Is it possible that Ubuntu using P2P in its background? or apt-get or synaptics using P2P in their process?" If Ubuntu can't do that, I can prove myself. But If Ubuntu does, I still can show to them that it's Ubuntu's program and it's legal.
When removing packages via Synaptics it gives the option of Mark for removal Mark for complete removal If I mark it for complete removal does it mean it will never be available from Synaptics again or does it mean that the whole package will be deleted from my system and have to be downloaded again if I want to install it again. I am never sure which to pick
Okay here is a good one. I am running KDE and i am trying to use the instructions found here [URL] to enable the touchpad tapppping. I have done it this way before successfully but now i seem to be having a problem. When i started all i had was a 10-synaptics.fdi file that just had the word synaptics on it...then when i tried to modify it the only change that took place were the addition of 1 2 3 after it. I've tried over and over with different editors with the same result and no touchpad tapping.
I have a new HP ENVY 14 laptop with OpenSuSE 11.3 installed, running the Gnome desktop. The laptop has a Synaptics TouchPad. By default, many of the touchpad settings are turned off, e.g. single tap to click. I'm trying to set them in /etc/X11/xorg.conf.d/20-synaptics.conf code...
I've verified that the settings I'm trying to set work when I set them using synclient, e.g. synclient TapButton1=1 enables tap to click.
I'm brand new to Linux and OpenSuSE so I'm not even sure this is the preferred way to set up my touchpad. I'd appreciate any help diagnosing this problem.
My Laptop is a Sony VAIO VPCS12C5E. I recently installed Fedora 13 (x64). I have the problem that the Touchpad is not working at all.The following Synaptics driver is installed:
xorg-x11-drv-synaptics-1.2.2-6.fc13.x86_64
Touchpad is not listed in GPointing (Version 1.5.1-2) A USB Mouse is working fine. I tried adding the following configuration to a new X11 conf file under /etc/X11/xorg.conf.d/01-synaptics.conf
I had finally go tmy netbook set up the way i wanted it, everything was working great. The notification popups were annoying me so i was trying to disable them. I used this string in a terminal: sudo mv /usr/ share /dbus-1/services/org.freedesktop.Notifications.service /usr/share/dbus1/services/org.freedesktop.Notifications. service.disabled
After rebooting i had nothing but a taskbar.No icons, no panels, nothing but wallpaper and the taskbar. I can't even figure out how to open up a terminal.Hopefully there is a way to load synaptics and reload the desktop somehow?
I try to install anything in terminal, synaptics update and package manager. I get this error in all those places deb' is not known on line 56 in source list /etc/apt/sources.list, E:The list of sources could not be read
I have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
I'm trying to setup X on an old netbook to act kinda like a small backup server for a few VPS servers i own, Anyway so i decided to install X + openbox + Other Programs together to create a basic desktop that i could vnc into if i wish or could use from the main box.
(Heres the problem)
When X starts it says it cannot queary the touchpad and when X loads i have no mouse. The first few times i started X I had no problems. I've looked on a few websites but i cant seem to get the touchpad to work again, Any Ideas?
I had a question about how to configure wheezy 7.2 on a laptop with a Synaptics touchpad. As installed, the touchpad is recognized; I can move the mouse pointer with it, and even scroll vertically with the touchpad's scroll strip. However, it won't let me tap or double-tap on the pad to emulate mouse clicks, like I can in other OSes. I am running the LXDE desktop on Debian Wheezy 7.2.
And, there is no configuration that I can find for the Synaptics touchpad in the default setup; I looked all through the menus.
So far, I've tried a few suggestions I've found while searching. I installed a GUI-based config program called "GPointing Device Settings", and *some* of the settings in that program seem to work with the Synaptics touchpad, but others, like the tapping settings, don't.
One point of confusion for me is that some of the solutions I've seen mention a folder /etc/X11/xorg.conf.d/synaptics.conf; however, on my system, there is no xorg.conf.d folder underneath /etc/X11, and in fact, I can't find that folder anywhere on the system. The page I was looking at is here: [URL] .... does LXDE use a different X setup than other desktop environments?
I recently installed Debian with the Xfce desktop environment on my Toshiba Satellite laptop and my Synaptics touchpad simply does not work. In fact, it was not even working in the Debian graphical installation.
I verified that the touchpad is enabled by going to Applications --> Settings --> Mouse and Touchpad. I also verified that I had the requisite drivers by running Code: Select allsudo apt-get install xserver-xorg-input-synaptics. Finally, /var/log/Xorg.0.log did not reveal anything unusual, though the output is quite long and was difficult to navigate. Here is the output of Code:
after an upgrade today (it's been about a week since last upgrade), synaptics forgot all settings I've set in /etc/hal/fdi/policy/11-x11-synaptics.fdi, although the file is still there. I can re-enable the desired settings via gsynaptics (more or less, because gsynaptics doesn't give me the option of two finger horizontal scrolling but that's no big deal), however after a restart it forgets the settings as well. There are some synaptics-related errors in /var/log/Xorg.0.log, but I don't understand them. Here's the snippet (the second half is maybe not synaptics-related but mouse-related, I'm not sure):
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event8) (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
after finally being able to find the right configuration file for the Synaptics driver (I still think the change from HAL to udev was too silent...), I have gained the ability to configure my TouchPad. One Issue has been bothering me for a long time now: When moving the cursor from left to the right, at a certain position the mouse cursor jumps to the right edge of the screen.Here is the output of synclient while moving the finger constantly from left to right to illustrate the issue:
[code]....
Note that the value of RightEdge was changed by me in order to see if it has something to do with the issue. It has not, the cursor jumps at the same position, regardless of this value.
Since when I installed Debian, I couldn't manage to make the tapping function of this touchpad work on my laptop - a Dell Latitude C610, with Debian squeeze. As suggested on [URL], I created a xorg.conf file with
Xorg :1 -configure
After that, I opened the file for editing it. There was no line regarding the Touchpad. The closest to that I found was
I tried adding the lines on [URL] ... C_Xorg_7.5 to the file, but it didn't work. I also tried installing gsynaptics but, even though the tapping function was enabled there, it didn't work. A weird fact is that vertical scrolling with two finger touch is working, but not tapping.
I'm running Debian Squeeze on an HP Pavilion dv6-6040ca. The touchpad featured is relatively new, which is likely the root of my problem. The touchpad with its winblows driver features a backlight, two mouse buttons (buttons,not dedicated touchpad space), and an 'on/off' switch/zone in the top left of the touchpad. The touchpad zone works well for pointing, but no gesture support. The touchpad's tap/click feature works way too well, which is very frustrating. The touchpad is detected as a mouse, so there is no option in System->Preferences->Mouse for a touchpad. Both mouse buttons function as expected. The 'on/off' switch/zone does not function, nor does the backlight.
The only feature I really need is the ability to turn off the tap/click feature, as it makes typing a nightmare. It's gotten to the point where I wrote a shell script to toggle the loading/unloading of my psmouse module (which isn't a bad solution, but I don't want my general account having access to modprobe).
I'm using the proprietary ATI driver (couldn't do 3D with the open driver), and I'm using a proprietary wireless module for my RaLink wireless adapter.
Passing parameters to the psmouse module Unloading the psmouse module Trusting HAL entirely (no xorg)
[code]....
also the xorg input synaptics driver is installed. Now here's the fun part where the obvious things I've overlooked are quickly pointed out to me.
When I reboot, and check "synclient -l" all the options except the last two ("VertTwoFingerScroll","HorizTwo FingerScroll") are configured the way I made it. These keep getting reset to zero and I tried adding this snippet to the end of files in /usr/share/X11/xorg.conf.d but to no avail.If I do "synclient VertTwoFinger Scroll=1" then it my two finger scroll works, but I want it to be permanant. Anyone have a clue why it keeps going back to 0?
I'm running F13 on an HP-dv6 with a Synaptics touchpad. I have not had any problems with the touchpad until the latest kernel upgrade to 2.6.33.8-149.fc13.x86_64. Now, intermittently with no obvious cause, yhe Synaptics driver fails to load at boot resulting in a dead touchpad. I've tried altering my xorg.conf with no results. The error message I get during boot when this happens is:
Code: unable to query Synaptics hardware I've done some Googling as well as searching these forums and have found several suggestions, none of which seem to work. I already have /etc/X11/xorg.conf.d/10-synaptics.conf which reads:
When it works it works great. Just seems to be no rhyme or reason for it. When it's not working and I try to run synclient I get an error that the synaptics module is not loaded. I'm wondering if anyone else has had this problem, or is it just me?
To cut to the chase, I have an ACER Aspire 8735G-6502, a fairly new model. I'm having issues configuring the multi-gesture to the touchpad to do any of the gestures. In fact when more than one finger is placed on the pad, the pointer flies around the screen in a random pattern. Does anyone have advice on either the configuration of the gestures, or a way of disabling any gestures and just having it be a single digit (classic) touchpad.
I've gone from 13.1 to 13.37, and hit this problem. The Irish (~=gb) is gone to US, and the bar along the side of the touchpad no longer works.
So I went to the Backup (Yes, stop laughing, I had a backup) and copied in /etc/hal/fdi/policy/* which had the files for sorting slackware-13.1, but _they_ did nothing after a reboot. I have
