Software :: Accessing IMAP Folders Using Mutt With Lavabit?
Jul 1, 2010
I'm having some issues accessing any folders besides INBOX on the lavabit IMAP server using mutt. I'm not sure if it's something I'm doing wrong specifically or if lavabit just has some funky folder setup and I don't know how to use it. here's the basic server info, though I don't think that'll do much good for my issue (more specifically: I can log in, send messages and read my inbox, but not use other folders).
Here's my .muttrc:
Code:
#####.muttrc#####
set realname= '<REAL NAME>'
set from= <USER>
set imap_user= [user]@lavabit.com
I'm having some issues accessing any folders besides INBOX on the lavabit IMAP server using mutt. I'm not sure if it's something I'm doing wrong specifically or if lavabit just has some funky folder setup and I don't know how to use it.Here's the server setup:[URL]though I don't think that'll do much good for my issue (more specifically: I can log in, send messages and read my inbox, but not use other folders).Here's my .muttrc:
Code: #####.muttrc##### set realname= '<REAL NAME>'
I found this page to have the configuration of : but I have to adapt and get always errors. [URL] What are the minimum configurations so that one can do : echo test | mutt me and it sends it via msmtp and mutt one can read his emails using hte imap enabled on the account?
I've finally found out how to add Thunderbird to and remove Evolution from the Messaging Menu. the only problem is that the Thunderbird notifier will only monitor my inbox.I use procmail to filter messages server-side, and want to check for the presence of new messages in another folder. The only app I've found that can do this so far is mail-notification, which can be pointed to directories other than Inbox.if/how I can integrate this into the Messaging Menu interface? Or are there any other solutions?
I frequently receive e-mail from mailing lists in which I would like to stay active in, although when I access my e-mail I'd like to be able to have the unimportant e-mails in their specific IMAP-folders so I can read them later when I have time.
There is one very important requirement. It bugs me that people continuously keep advising me poor solutions that involve forwarding e-mail e.g. to blabla-mailinglist@domein.tld or storing the e-mail locally. I work frequently from different locations, use different e-mail accounts and see e-mail stored on the server rather than on my local machine as a great advantage.c.
I was thinking of preferably a simple solution that works via a cronjob to do sorting, so it will also work for Plesk and Gmail IMAP accounts. Sorting based on from/to/subject should be sufficient.
Where exactly can i find the filesystem of netbook? the left panel contains a files and folders icon which only shows me recent documents... also how do i access my windows and files on other hard disk driveS?
how to access files and folders on alive computers on my college LAN,i hv angry ip scanner installed but it only lists the computers on lan,whereas i want to access files(e.g copying,etc) on others computers(in the same way we do in advance ip scanner in windows). i am using ubuntu 10.04 LTS
My spare laptop refuses to load into the OS (it's running 10.10) or even give me a log-in screen - it sits there with a blinking cursor in the corner of a black screen. It's a 7 year-old laptop I mainly use as a mediacenter, which means I keep very little on it so I figured I'd just do a complete reinstall and move on.
So I threw in a livecd to grab the one folder I needed before I was going to wipe the drive, but apparently at some point this folder got permission locked, and it won't let me open it or copy it to an external through the livecd. Is there any way I can get at this folder?
After trying Truecrypt, LUKS, and Ecryptfs I decided to try NTFS encryption. Now, on a dual boot computer from Ubuntu I can browse the encrypted folders but can not open the encrypted files. All attempts produce access denials yet the Unix file permissions appear to be "0777" (owner, group, and world readable-writable).
Is there someway to get Ubuntu's NTFS software to recognize and decrypt the encrypted files? Would a different NTFS package work such as NTFS-3g?
I'm using Ubuntu 10.10 since 2-3 weeks. First I tried live CD and the OS seems to be very good. So i installed it on my laptop.So far i had no problems until I tried to access the shared network folders of my Server running on MS Windows Vista and another trial PC running WindowsXP. I'm trying to solve this since 2-3 days, I haven't found a solution.1st of all my network works fine. All computers can ping each other and as the laptop had Windows XP installed the server was accessable.1st I installed the SMB4k tool with this program. I could see the computer names, but as soon as I select a Windows computer the tool searches and nothing happens.
I tried a lot of different variations of this command but in the end I receive this kind of error. I also tried to add -o user=username pass=password, nothing changed.After this I searched information about this error, some forum threads I googled are telling the SMB4K tool modifies the /etc/sudoers file and cause this error. So i tried to change it back with some kind of sudo chmod 0640 etc/sudoers but this won't work it seems I can not modify or edit thisw file using sudo.With the pyNeighbourhood tool I could only see my Laptop but not the Windows PCs.At the end I will install Linux systems on all of my PCs, but only if all my tests will pass .
as we know in windows xp drive and folder permissions, we perform (folder-right click-properties-security tab-we check, group or user and assign ALLOW or DENY access to the folders) In the same way i want to DENY access to my windows driver sda1 & sda2 from the Debian OS. my system is being used by 3 users: user1, user2 & user3. All can access to all Volumes, so I want to Deny the users 2 & 3 from accessing my windows driver and folders. BUT i alone user 1 should have permission to access them. How do i change that in Debian 5.5? Allow/Deny Permissions to Volumes.
I've been running Courier IMAP for many years now, but when I added gmail's IMAP to my Outlook I noticed something interesting: when you delete a message, it gets thrown into the trash instantly.
With Courier IMAP (or any other IMAP server, for that matter), when you delete, it first marks it for deletion. Then after you Purge Deleted Messages it either gets rid of them or moves them to trash.
I'm looking for a method to sync my calendars on my IMAP server with both my Thunderbird/Lightning any my Blackberry. I found "IMAP Calendar Proxy" here recently, but it has been inactive for 5 years. I've seen people suggesting the use of services like Plaxo and such, but I don't like the idea of a third party messing with my calendars and contacts. Also, I've had to remove several viruses from computers with Plaxo, and I'm not sure if it in itself is a virus or not..... It certainly is a thorn in my side as is. This is for my personal IMAP server, so I'd prefer a free solution even if it is more difficult to install than a paid version. I mainly need it to just sync my calendar to my Blackberry and Thunderbird and couldn't care less about the contacts.
I've been Googling for things for quite some time now, and haven't really found anything that says that it will work with Blackberry and Thunderbird. They really only give a sense of maybe with nothing really defined. I can put on an Ubuntu server to sync everything? I don't want to leave my computer on all the time, and RIM has yet to come out with something decent to sync Blackberries and Thunderbird properly as far as I know.
I am trying to find a good text based email client for an older machine, which will not run the GUI correctly due to min. hardware; however, I want to be able to use it with Text based email clients.Can anyone recommend a good text based email client that supports TLS/SSL for securied connections for IMAP, or even POP3?Does MUTT support SSL/TLS?
Have you used dropbox to sync your mail dirs? Was it a disaster? ... ? I have been using dropbox to sync across three ubuntu machines (two with 9.04, one with 10.04) and a windows vista machine, for about six months. I've seen a couple of oddities but am basically very happy with it. I pay for their 50GB store.
For email I use mutt and download (fetchmail) separately onto two of the ubuntu machines, outside the dropbox folders. It's a bit irritating maintaining two different mail dirs, but it does make for more security. I'm now thinking about putting the mail dirs into the dropbox folder. But if something then goes wrong with the syncing, it will be serious.
mutt-1.5.16-36 on opensuse 10.3 lacks SMTP support as shown in mutt -v ("-USE_SMTP"). Does anyone know which version of mutt would have it for opensuse 10.3 and where can I download it from? I don't want to compile from source or use an external program.
I use CentOS 5.3 and I am trying to send a simple email through mutt.My command is:echo "test" | mutt -s "test email" myemail addressI have no errors displayed but the email never goes out of the machine. Also the /var/log/maillog is empty.I can see the queued email with:sendmail -bpSo emails never go out.This PC is connected to a network which the gateway is another Linux machine which is configured to be the default gateway in my /etc/resolv.conf as nameserver.
I choose "accept always", but the same message appears next time. I do not wish to have a certificate requirement for MUTT and did not intentionally set the program up to include this feature. How can I get rid of it? My second choice would be to get a new certificate, but then I have to go through this every year. I have MUTT working on two other servers and this does not happen.
I'm trying to get my network set up. There is an internal network separated, by a dedicated firewall, from the DMZ. I'm trying to send mail from the internal network, using mutt, to the postfix server on the DMZ.No firewall is set up yet on the dedicated firewall(the whole network is, at the moment, protected by the border router) Mutt was installed with the smtp, pop,imap,ssl,sasl,gdbm options.
I thought the fact that it was compiled with the SMTP flag set would enable me to either send mail without an MTA on the same machine that mutt is installed on(internal network host) Or that i could just specify the path to the sendmail binary and not have to start postfix as a daemon ?I've found out that sendmail is supposed to be a postfix command. So i added:
Code:
sendmail="/usr/sbin/sendmail" to /Users/me/.mutt/muttrc
But now when i start mutt i get an error saying:
Code:
/usr/sbin/sendmail: Unknown command
Obviously i started postfix before firing up mutt The permissions say that i should be able to execute sendmail as a normal user.But mutt isn't dealing with it, even though permissions appear to be correct.What do i need to do to get mail, from a normal user, over my LAN working(with mutt and postfix)?Once i have this working then i can get a proper domain name and configure postfix on the DMZ for SASL+TLS etc etcBTW i can send mail to postfix from internal network using
I am currently using a shell script to run a java app which performs some integration logic. The shell then continues to compile a file with all stats resulting from the java app. I then send this compiled stats file to several emails. The email is from 'root'. Is there anyway to change this without having to create a new user and running this app as them instead.
I have been using icedove for quite sometime. Now I feel I need to also use the flexibility that mutt allows. In such a case, is there a way that mutt can read icedove mails, maybe via some plugin or other. I do not want to do the import icedove mails to mutt as there would be duplication of metadata and space.
I receive a lot of emails daily, and with the ever-growing amount of maildirs I'm in need to structure/optimize the browsing in mutt. My maildirs follow this naming scheme: .domain.category.sub_category
My goal is to break domain, category and sub_category into nested levels when browsing through the mailboxes. This is sort of achieved through the use of imap. But I stumble upon a few snags, so my questions are:
Is this nested mailboxes view possible by directly accessing ~/Mail and not using IMAP? E.g. set folder="~/Mail" and set spoolfile="~/Mail/.INBOX" When I start mutt I'm presented with all mailboxes available, which is what I want to get away from. I want to get directed directly into my default/main inbox like I do when accessing ~/Mail directly. How?
When hitting c (a defined macro, see configuration below) I again get presented with all the mailboxes available, and not the mailboxes at the current browsing level, e.g. mailboxes containing a specific category. To get this view I need to hit c+TAB. I've solved this by adding a <tab> to the c macro's. When finally getting mutt to present me mailboxes in nested levels they are only enumerated and not annotated with N, indicating new mail, or even better, total number of new mails in or under a folder. I know it's possible to define format on the different views, but is there one for this view? If so, which?
My mutt configuration: set autoedit set edit_headers set reverse_name set from='blapp' set realname='Blapp' set use_from .....
# Automatic viewing of html mail, but always prefer text/plain set implicit_autoview alternative_order text/plain text/html
I am coding some scripts for sending via irda to my PDA with another irda that has a triggering on the remote control. OK. What I would need is as follows. With MUTT, I configured it so that I can read my emails with the IMAP and gmail. It is cool. It is working with the last
I have a certificate froma CA that I want to use with Mutt. I have been using this certificate to sign emails in thunderbird and I don't want to send emails from mutt without it. I looked on Mutts website, but I wasn't able to make heads or tails of it. I found something on Google about gpgp certificates and wanted to know if that would be the same type of instructions.
I am looking for a mutt like mail client that completely be command line simple an low memory usage because some body told me it has bug, in this [URL](if you have different answer write it in that post please) would any body tell me a good known with simple configuration for sending mail with smtp configuration.
