Slackware :: Build - Change The Picture With Lilo.conf Doesn’t Work
May 5, 2010
when i load lilo, everything is greenish and weird, i tried to change the picture with Lilo.conf, fallowing the exact instruction given by linux forum, dosnt work. the linux logo got verry strange colors has well,verry ugly.
at first i tried to install my ati driver, but my x1800 is not supported anymore, so i decided to run xconfsetup to use the default ati driver. After that i have been in the xorg.conf generated by the setup and it seem they got the right driver, it say radeon in the device section. another problem i experience is that everytime i lod KDE my default resolution suck, and when i open the control panel and click on display, everything goes right.
the last problem is more serious, when i order my computer to shutdown either by command line or with the logout button, the screen goes black and nothing happen at all. Its sad beccause so far everything else seem to work fine, i installed my network card and my sound card properly.
View 14 Replies
ADVERTISEMENT
Jan 10, 2011
I finally installed Slackware and now I have Windows, Slackware and Ubuntu in my laptop. I installed Ubuntu at the last order and at that time GRUB the default loader. But I feel that I'd like to use lilo more, so I booted into Slackware and run "lilo" and then lilo became the default loader.But then I cannot access Ubuntu anymore. Because in lilo there're no information about Ubuntu. So I added some information about Ubuntu according to that of Windows in lilo. But that failed. I still cannot access Ubuntu. I searched for the posts about this problem, and this is what they say:
Quote:
image=/ub/vmlinuz
label=ubuntu
read-only
root=/dev/sda7
initrd=/ub/initrd.img-2.6.28-13-generic
or something like this. But in my slack I cannot find the image or the initrd.
View 1 Replies
View Related
Jan 10, 2011
My thread "Can't add Ubuntu into lilo.conf" was merged with this one.That problem has been solved, As I solved that problem, I got several more questions: When applying the changes by run "lilo", there's a warning about "large-memory". How come and how to solve? When loading into lilo, there's a capital character "U" in front of "Ubuntu". At the same time, there's nothing in front of Slackware or Windows. I wonder why. And, now that lilo read the booting info from slackware, if sometimes slackware get collapsed, could I still be able to access lilo? If I can access lilo, can I still boot into the other OSes?
View 4 Replies
View Related
Jul 25, 2010
Trying to do an install with encrypted lvm. I have made it to the end of the install and chroot /mnt and then ran mkintrd which added the modules successfully but then when I ran lilo again I got an error saying that said "fatal: can not open: /etc/lilo.conf".
View 1 Replies
View Related
Jun 30, 2010
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
View 91 Replies
View Related
Apr 14, 2010
I have Windows on sda1 and just installed Slackware on sda2. There also is a hda data drive, which usually appears first on drive lists. During installation, LILO gave an error (I tried installing both to MBR and root, both times the error was about something like "root: (N6").
Then I did the following
-boot with installation cd
-hugesmp.s root=/dev/sda2 rdinit= ro
-login
[code]....
View 2 Replies
View Related
Feb 13, 2010
When I insert the xD card into the built-in 5 in 1 card reader of my laptop it doesn't work. An SD card for example does work with this reader, so it is not a "faulty hardware" problem we are talking about right now, and neither is a "HW is not recognized" kind of a problem. My card reader is seen as a
Code:0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)in the lspci output.I use debian testing with a 2.6.32-trunk kernel (what is this "trunk" here anyway?)I know this isn't a unique problem and with a cheap external USB powered card reader (I have one) this whole thing can be worked around, but still.
View 2 Replies
View Related
Mar 7, 2010
I'm trying to use a webtv subscribtion on ubuntu kermic, however it seems that that vlc dosnt support wmap yet, so i'm not getting any sounds on it. Does anyone have a clue on how to get this fixed, or if its even possible to get it fixed? I've tried searching guides for it without anyluck. And when i'm trying to set it to use gmplayer or totem it dosn't work either, mplayer and totem dosnt get either picture or sound.
View 5 Replies
View Related
Apr 9, 2010
I have freshly installed Slackware 13 64-bit.
After messing around last time trying to compile fglrx for my ATi card, I now understand it uses a built in radeon driver.
My question is this: how do I get X to recoqnise my custom xorg.conf file? I dropped it in /etc/X11 but to no avail.
HAL does it great job - but I need my xorg.conf as I have dual monitors which HAL doesn't configure correctly (displays mirrored, not stretched).
View 14 Replies
View Related
Apr 4, 2010
I have the same problem as described in [URL]. Apparently the solution is to add
PHP Code:
Option "AccelMethod" "EXA" to xorg.conf.
However my system apart from this works fine without xorg.conf. Is there a way to change the AccelMethod without an xorg.conf?
View 3 Replies
View Related
Oct 12, 2010
My network works before but now it has follow issue, when I ping google.com, I got Quote:
ping: unknown host google.com but my network still works partially because I can still connect to a DNS listed in my /etc/resolv.conf to get host google.com's ip adress by Quote:
host -t a google.com ip.of.one.dns and then I ping the returned IP result 66.249.89.104, the ping works fine. the issue is that I can't connect to Internet, what I can remember is that I ever removed /etc/resolv.conf and this file was created again by network-manager, and I already verified the two dns IPs listed in the resolv.conf are both correct and works fine with command host.
View 2 Replies
View Related
Aug 24, 2011
im having some trouble with my ddclient configuration. i followed the guide from [URL] and everything seems to be in order however it doesnt work. ive been emailing support at [URL] however they have yet to offer me a viable solution. perhaps someone here may know what my problem is. below is the results of the command: sudo ddclient -daemon=0 -debug -verbose -noquiet below that is my .conf
[Code]....
View 1 Replies
View Related
Jan 11, 2010
We recently moved all our Red Hat Linux machines from NIS to LDAP and we're seeing some issues with name resolution.
One thing I should mention is that DNS (the first nameserver in resolv.conf)is being used by LDAP for name resolution.
Now our resolv.conf file has always looked like this.
Search domainname.com
Search domainname2.com
Nameserver xx.xx.xx.xx
Nameserver xx.xx.xx.xxx
The problem is that the above resolv.conf file doesnt work anymore. The only way that our workstations get name resolution is by commenting out the second and forth lines, which happen to be our secondary DNS. This has got me confused because why would resolv.conf be broken by having a secondary nameserver and search path? Shouldnt it just use the first nameserver unless it fails to resolve? Almost seems like just having the secondary in the file breaks name resolution. I cant ping local hosts or anything on the internet unless I do this:
Search domainname.com
#Search domainname2.com
Nameserver xx.xx.xx.xx
#Nameserver xx.xx.xx.xxx
View 1 Replies
View Related
Apr 10, 2010
Been working hard on trying to get my Radeon 5870 to run in Debian Lenny (x64). I've installed the xserver-radeon, radeonhd & ati packages through the synaptics manager, but my xorg config file is completely without information:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
[Code]....
View 1 Replies
View Related
Dec 5, 2010
[URL]...
I switched to my onboard Video Card CN896/VN896/P4M900 [Chrome 9 HC]. Here is a bigger problem, compiz dosen't work, hd videos, some flash. I have formated HDD and installed again Ubuntu 10.10. Ubuntu automatic installed the xserver-xorg-video-openchrome. The /etc/X11/xorg.conf is empty.
View 5 Replies
View Related
May 27, 2009
I wanted to put password in lilo.conf file. I added this line but doesn't seem to work out Code: password=vickey. I also did Code: lilo -v Is there any thing missing
View 8 Replies
View Related
Dec 15, 2009
I find it very frustrating that documentation suggests using PEERDNS=no in /etc/sysconfig/network-scripts/ ifcfg-eth0 in order to override resolv.conf information only to find out that both NM and network init scripts ignore DNS1, DNS2 and DOMAIN settings.So my question is how do I correctly configure resolv.conf settings that will persistently override dhcp information on a F12 system that has NM removed and uses the network service scripts?
View 3 Replies
View Related
Aug 22, 2010
I just tried setting my vga mode in grub.conf so that I can have my boot splash back after disabling nouveau. Works great. Problem is, now, that after doing this my touchpad is disabled. Anyone else run into this? I'm on an HP dv6, FC13, vga=0x37b. I remove vga mode setting and touchpad works again.
View 1 Replies
View Related
Aug 7, 2010
i have dual boot system with windows7 and ubuntu 9.04 i am unable to find lilo.conf file in /etc. what's this file? what to do?
View 2 Replies
View Related
Jun 20, 2011
I am trying to install kernel 2.6.39.1 on ubuntu 11.04I am fllowing this link But may this link is little oldIt mentions a file /etc/lilo.conf to edit but this file is unavailable.where I can find this file r if the page which I mentioned is old then can anyone give me the link which guides me correctly abt how to install kernel 2.6.39.1 in ubuntu 11.04?
View 9 Replies
View Related
Feb 3, 2011
I am trying to build a 2D plot for my data and I have the code for it. However, I want to save it as a jpg/png file so that I can have a link to it for my webpage. Below is the code:
Quote:
import java.awt.*;
import java.awt.font.*;
import java.awt.geom.*;
import javax.swing.*;
[Code].....
View 1 Replies
View Related
Jul 22, 2009
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies
View Related
Jul 18, 2011
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
View 17 Replies
View Related
Mar 1, 2010
I'm fairly new to Linux so I'm going to need a step-by-step guide to get me out of this rut. The install of Linux was fine but when I booted up I got this error. VFS: Cannot open root device "302" or unknown-block (3,2) append a correct "root=" boot option;here are the available partitions;
0800 78150744 sda driver:sd
0801 47428608 sda1 <-- this is my Windows partition
0802 30719552 sda2 <-- this is my Linux partition
0b00 1048575 sr0 driver:sr
0b01 1048575 sr1 driver:sr
Kernel panic - not syncing:VFS:Unable to mount root fs on unknown-block (3,2) I guessed from reading this error Lilo isn't pointing to the right partition to boot from? How will I fix this? I read another thread about boot problems on these forums and a guy said to do this:
#mkdir /slacktemp
#mount /dev/device /slacktemp
#chroot /slacktemp
#cd /slacktemp/etc <-- for me it told me that doesn't exist
#vi lilo.conf <-- couldn't do nothing and was frozen
#lilo -v -t -b /dev/device
#lilo -v -b /dev/device
The above solution did not work for me. Can anyone shed a light on a Linux rookie?
View 14 Replies
View Related
May 29, 2010
I just did a fresh install of slack 13.1 on a separate drive to the one I was previously using. I've been having trouble getting lilo to work, so that I can choose between either drive. Lilo is currently installed to /dev/sda, with the old system on /dev/sda1 and the new installation on /dev/sdb1. I keep getting errors like these:
Code: Fatal: Trying to map files from unnamed device 0x0011 (NFS/RAID mirror down ?)
I managed to install lilo from the old system by copying the kernel image from the new system into the /boot/ directory and running lilo. I am now on the new system and trying the same thing in reverse but it isn't working. I have searched around a bit and there's a lot of talk of chroot-ing into the other partition to run lilo. I don't understand why the process isn't working both ways though. I can't run lilo on my new installation even with the two kernel images in the local /boot/ folder. Is this something to do with btrfs or am I missing something to do with lilo? This is my lilo.conf file. I am trying to run lilo using this file from my new installation on /dev/sdb1 and getting the error given above.
[Code]...
View 13 Replies
View Related
Sep 16, 2010
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
View 2 Replies
View Related
Jul 24, 2010
I had been running Slackware64 13 almost since it came out and recently upgraded to Slackware64 13.1.Every thing looked to be working well until I tried to burn a DVD with k3B. It starts the burn process but then dies and says that "cdrecord has no permission to open the device".I was able to put in a DVD+RW and erase it without a problem, but when trying to burn to a DVD-R it stops and gives me the error.I checked cdrecord and it is owned by root in the root group.
View 11 Replies
View Related
Dec 2, 2010
The sc spreadsheet app doesn't really work in 64bits. It launches but you're unable to do anything with it, it's not possible to enter any values in the cells or do anything else. It works fine in 32bit though.
To make it work properly in 64bits, you can use this patch, borrowed from debian: http://salix.enialis.net/x86_64/13.1...changes-7.16-3
And there is also this patch to make DESTDIR work properly with the Makefile: http://salix.enialis.net/x86_64/13.1...-destdir.patch
View 3 Replies
View Related
Mar 16, 2010
I maintain my slackware by using slackpkg-current. When I upgraded to the new OpenSSH 5.4, I noticed that my key method (passwordless) doesn't work anymore. I checked and checked the conf files but everything looks fine.I tried debug but can't get it to work, here is the debug:
Mar 15 21:52:15 vmslackware2 sshd[2663]: debug1: rexec start in 5 out 5 newsock
Mar 15 21:52:15 vmslackware2 sshd[2622]: debug1: Forked child 2663.
Mar 15 21:52:15 vmslackware2 sshd[2663]: debug1: inetd sockets after dupping: 3,
[code]...
View 1 Replies
View Related
Apr 10, 2011
The FreeCAD slackbuild doesn't work. All the Slackbuilds for the dependencies worked.
Code:
checking for boost system library... yes
checking for X... libraries , headers
checking for host... linux-gnu
[Code]....
I don't know what to do. That's the configure file in /tmp/SBo. Even if I alter it then when I run the slackbuild script again it wipes the old configure file and loads in a fresh one from the .tgz package.
I think the problem has something to do with bash4 parsing differently than bash3 or something? I don't know.
View 16 Replies
View Related
