Slackware :: Freecad Slackbuild Doesn't Work?
Apr 10, 2011
The FreeCAD slackbuild doesn't work. All the Slackbuilds for the dependencies worked.
Code:
checking for boost system library... yes
checking for X... libraries , headers
checking for host... linux-gnu
[Code]....
I don't know what to do. That's the configure file in /tmp/SBo. Even if I alter it then when I run the slackbuild script again it wipes the old configure file and loads in a fresh one from the .tgz package.
I think the problem has something to do with bash4 parsing differently than bash3 or something? I don't know.
View 16 Replies
ADVERTISEMENT
Feb 20, 2010
I'm trying to install OpenShot for the second time. I was originally trying to make a slackbuild for this, when a new one appeared in SBo. It does not work for me, however. It seems that it has to run a python install script and this fails. The package then complains that it cannot find the mlt python bindings.
View 13 Replies
View Related
Feb 14, 2011
The bluetooth not work on slackware 13.1 with gnome slackbuild and whene im try install gnome-bluetooth i get this:
PHP Code:
Where can i found glib-compile-schemas? or is there any easy way ti make bluetooth work ?
View 1 Replies
View Related
Apr 3, 2010
I have been trying to build FreeCad and k-3d for Slackware......not much luck...
FreeCad has two build systems... automake and cmake, both fail despite the fact that dependencies are installed...cmake build system fails at about 80% complaining that it cannot find
Quote:
I guess the build system is broken...About K-3d, the thing builds alright..had to install libsig++ glibmm cairomm pangomm and gtkmm as dependencies...
The thing actually builds but when i try to make the installable package, I have to use trackinstall -i="make -i install", but the installable package fails to launch because it cannot find stuff in /usr/share/
View 13 Replies
View Related
May 13, 2011
I am trying to get freecad working on my 13.37 64 bit There must be a problem with xerces-c slackbuild This is what I get running the slackbuild checking for C compiler default output file name. configure: error: C compiler cannot create executables See `config.log' for more details. the last line in the config.log is
configure: caught signal 2 configure: exit 1 I am dumb founded tried with src2pkg but that gives another error Skipping compile_source - FAILED!! No INSTALL_LINE given.
View 2 Replies
View Related
Jan 10, 2010
For the last couple of weeks, I can't seem to reach [URL]... Browser just times out. Here's a traceroute: [URL]...
View 10 Replies
View Related
Jul 5, 2010
I am going to try out a tiling wm and I have narrowed my search down to scrotwm and dwm. I installed scrotwm from slackbuilds.org but it did not show up as a selection when I ran xwmconfig? Any ideas as to why? So then I went install dwm from slackbuilds.org but saw there was only a build script for slackware 13 as opposed to 13.1 which is what I am running. So two questions for dwm, one why is there no slackbuild for 13.1, and two when I tried to use the slackbuild for 13 this also didn't show up under xwmconfig, any thoughts?
View 4 Replies
View Related
Jun 6, 2010
As always, very impressive effort from Slackbuilds.org to get slackbuild scripts updated for 13.1. Thanks to all who maintain these scripts. One which does not seem to have made it to 13.1 so far is a build script for WINE. Anybody know whether this is beacuse of some problem ? Or just an oversight ? The 13.0 script is there - might be OK to just use this with 13.1 ?
View 9 Replies
View Related
Feb 27, 2011
Getting the hang of diff and patch, to a small extent...However, I couldn't get the slack-desc to print anything useful when running installpkg. Always had trouble with the slack-desc files.
[code].....
View 11 Replies
View Related
Jul 9, 2011
i keep getting this error during gecko-mediaplayer build running 1337 stable up to date. lang.sh has en us utf8 enabled, (it didn't work with en US either.
[Code]...
View 5 Replies
View Related
Aug 24, 2010
it seems that there is no x11vnc slackbuild on sbo for 13.1. just wondering if there is something else people use to share the :0 desktop, or should i start looking into the 13.0 slackbuild
View 4 Replies
View Related
Jul 24, 2010
I had been running Slackware64 13 almost since it came out and recently upgraded to Slackware64 13.1.Every thing looked to be working well until I tried to burn a DVD with k3B. It starts the burn process but then dies and says that "cdrecord has no permission to open the device".I was able to put in a DVD+RW and erase it without a problem, but when trying to burn to a DVD-R it stops and gives me the error.I checked cdrecord and it is owned by root in the root group.
View 11 Replies
View Related
Dec 2, 2010
The sc spreadsheet app doesn't really work in 64bits. It launches but you're unable to do anything with it, it's not possible to enter any values in the cells or do anything else. It works fine in 32bit though.
To make it work properly in 64bits, you can use this patch, borrowed from debian: http://salix.enialis.net/x86_64/13.1...changes-7.16-3
And there is also this patch to make DESTDIR work properly with the Makefile: http://salix.enialis.net/x86_64/13.1...-destdir.patch
View 3 Replies
View Related
May 2, 2010
At least, that is what I think happened.I was interested in trying out tilda, which needs the confuse libary, both of which are slackbuilds on slackbuilds.orgI built and installed confuse, and then went to build tilda but got some error I could not follow up on.However after this, nothing as a normal user would work!For some reason my libary directories, /lib64, /usr/lib64 and other key directories such as /usr/share and /usr/bin were set to have permissions 700It took me a while to figure out what was causing the problem.Can anyone confirm that the confuse slackbuild resets your permissions like this? Otherwise, what could have caused it?Can someone please give me the correct permissions for those direcories? Is it safe to just do chmod -R 755 /usr and /lib64?
View 14 Replies
View Related
Apr 15, 2010
I'm looking for a VNC solution with the RENDER extension. TigerVNC seems to do what I want, but I have only found precompiled packages for Debian.
View 2 Replies
View Related
Mar 8, 2010
I have downloaded the source package and the slackbuild package for OpenOffice 3.2.0.Everything seems to go well until doinst, then I get error messages about zero length files:
Code:
install/
install/slack-desc
[code]...
View 6 Replies
View Related
Oct 2, 2010
Im trying to recompile glibc from a working slackware-current system using source from a slackware mirror. I'm doing it for testing purpose only. Never done that before, so i'm not sure if i'm doing it right. I get the following error:
Code:
make[2]: Entering directory `/glibc-tmp-a44be92860d34519b0c9a4500878e2e6/glibc-2.11.1/iconvdata'
../Makeconfig:85: ../i486/config.make: No such file or directory
/bin/sh: line 0: cd: ../i486: No such file or directory
The GNU C library has not been configured.
[code].....
View 14 Replies
View Related
Apr 8, 2011
I have the latest fbreader.Slackbuild via sbopkg. The compilation steps seem to run OK until, if I understand this correctly, it starts work on libzlcore, at which point things go wrong :
Code:
OK
The README says I will need liblinebreak, which I "Slackbuilt" with no problems.
View 3 Replies
View Related
Jan 13, 2010
I used the fbreader.SlackBuild in a 64bit system to create a package and I got some libraries installed under /usr/lib instead of /usr/lib64. FBReader seems to work fine though, so I'm not sure this is a problem. I guess it could be if some other app looks for those libraries. Just thought I should report it anyway.
I used UI=gtk if it matters.
View 6 Replies
View Related
Apr 29, 2011
Quote:
Trying to build ffmpeg in 13.37 but it fails with the rror above.
View 3 Replies
View Related
Oct 29, 2010
Any links to a guide for building a slackbuid script?[URL]SlackBuild_Script don't show nothing!
View 13 Replies
View Related
May 6, 2011
Tried to compile kbluetooth using the SlackBuild and it was going well until it got to here,
[Code]...
The script was ran using Slackware64 13.37 and the 2.6.38.4 kernel. I've googled around and searched here, but haven't found anything "current" on the such a problem.
View 1 Replies
View Related
Jun 2, 2010
If 13.1 and KDE 4.4.3 aren't new enough for anyone, I've just successfully built and installed KDE 4.4.4 with the slackbuilds for 4.4.3. I had to edit the Slackbuild for kdenetwork by commenting out the line that patches the source. Other than that everything seems to be fine, although I don't know yet if this is a good thing or a bad thing since I've just got it installed.
View 14 Replies
View Related
Apr 18, 2010
Anyone knows a slackbuild for netbeans 6.8 for slackware64?
View 5 Replies
View Related
Dec 23, 2010
I was trying to install the HandBrake slackbuild. It gave me an error saying it needed webkit, so I check for it in slackbuilds.org, where I found it. Listing said it required two things: libsoup and icu4c. So I downloaded the slackbuilds for those two and they installed fine, then started the install for webkit.
It did its build thing for about ten minutes, then it errors out, but the error message is pretty convoluted so I'm not sure what its telling me. Here's the last few lines from the terminal:
[Code]...
Anyone know what went wrong, and what I need to do to fix this?
View 2 Replies
View Related
May 13, 2010
I downloaded the slackbuilds openoffice.org files, extracted them, added the original source, ran chmod +x openoffice.org.SlackBuild, ran ./openoffice.org.SlackBuild, then found the resulting .tgz and installpkg'ed it. I was able to get through all of the steps listed without any error messages and everything seemed to be going well. However, now when I navigate to opt/openoffice.org3 (the created folder) and attempt to run any of the programs from kde nothing happens. When I attempt to run them in terminal I get the following message:
root@slacktop:~# soffice
/usr/bin/soffice: line 98: /opt/openoffice.org3/program/../basis-link/program/pagein: No such file or directory
/usr/bin/soffice: line 104: /opt/openoffice.org3/program/../basis-link/ure-link/bin/javaldx: No such file or directory
/usr/bin/soffice: line 129: /opt/openoffice.org3/program/soffice.bin: No such file or directory
is there some reason these files wouldn't be in there after a normal installation? I read the howto on slackbuilds.org several times to make sure I got all the steps right, and have tried uninstalling with removepkg and reinstalling and the same thing keeps happening.
View 2 Replies
View Related
Apr 20, 2010
On my ubuntu system when I was editing pdf files I used PDF-ShufflerSo now I wrote a slackbuild script for my slackware 13 (xfce)To be more specific, I dont know how to write a slackbuild script so I try to edit the pyPdf.SlackBuild script, hopefully it works! So I want to give it in public view maybe someone need it some time.
Code:
Homepage:
http://pdfshuffler.sourceforge.net/
[code]....
View 1 Replies
View Related
Jun 23, 2010
Running Slackware64-13.1; installed the SlackBuild Blender and I changed the last line in SlackBuild script to .txz everything seems fine. Now I'm looking at FlashPlayer SlackBuild, noticed the last line is .tgz? Just want to make sure I am supposed to be changing the last script line .tgz to .txz?
View 5 Replies
View Related
Apr 13, 2010
Where do slackbuild scripts put all their stuff? Because I was compiling QT4 with a slackbuild script and after like 10 years it finally got to the end I think and it was creating the tar.gz file in /tmp I think and then my stupid athlon overheated and my computer turned off. So I got an air compressor and blew all the dust out of the cooling fins and started over. But the script started completely over from the beginning like it hadn't done it all already.
My athlon's overheated before when compiling manually and when restarting make just skips all the files it already compiled. I wonder the slackbuild script doesn't do that.
View 2 Replies
View Related
Jun 21, 2010
can some one send me the slackbuild for openoffice 3.2.0?
View 2 Replies
View Related