Slackware :: How Can I Restore It To Gnome And Add It To KDE
Mar 8, 2010
When I used KDE 4.3.1 with Slack 2.6.29.6 kernel, there were no option to shutdown the computer from KDE. I always had to log off, then issue a "sudo /sbin/halt". The same goes for the reboot option.When I tried XFCE and Gnome Slackbuild on the same kernel, I noticed that there was options to reboot and shutdown. But when I compiled a new 2.6.33 kernel, it seems such options disappeared from Gnome. I didn't check XFCE.
How can I restore it to Gnome, and add it to KDE? I tried looking in the kernel config, but couldn't figure out which option is related to that.
View 2 Replies
ADVERTISEMENT
Apr 16, 2011
I pulled a bone headed maneuver when I thought I would try KDE. I used Synaptic and thought that I had done all correctly but on reboot all I got was a BG screen and a terminal wanting me to log in. I did but remained in the terminal... lost! I had passed on my 32 bit copy of Lucid so I installed the 64 bit copy on a new partition, so as to recover all my data. The problem is that the Flash Player does not work and I'm not inclined to fight it into living. I am downloading the 32 bit copy, right now but I need to know if it is possible to repair my old 32 bit install and save many hours of agony?
View 3 Replies
View Related
Jun 2, 2010
I right clicked on the panel on my Gnome Desktop and clicked on "Delete This Panel", now all the applications are gone, I can only access them by using alt + tab.How can I restore the Panel, I am running openSuse 11.2
View 2 Replies
View Related
Jul 3, 2011
I have installed OpenSUSE 11.4 with GNOME and it works perfect. But when i tried to uninstall Mozilla Firefox with other Mozilla adds, it began to uninstall all default gnome apps. And my GNOME menu and desk was empty. I tried to set back apps and to install again Mozilla stuff with other GNOME apps, so some apps has restored but main menu has half apps not like default. But after restart OS startet with IceWM, not with GNOME at all... So how to restore GNOME default mode without reinstalling OpenSUSE?
View 4 Replies
View Related
Oct 15, 2010
The other day I kind of messed up my panel and accidentally removed the exit icon from the upper right corner (in the panel). So I tried to restore the panel using this command:
Code:
It did the trick and restored the panels, however instead of saying my user name, it said root (again the upper right corner, in the panel). I realized this might be because I ran the command with sudo but if I didn't it would not succeed. AND when I reboot, it returns to its' messed up state.
I am running Ubuntu 10.10
View 1 Replies
View Related
Apr 9, 2010
I have accidently removed the nm-applet icon fron the panel .How can I restore the icon back on the upper panel? The nm-applet is running but without the icon appearing on the panel.In the startup application --> I edited it back to /usr/bin/nm-applet but it won't appear on the panel
View 4 Replies
View Related
Mar 17, 2010
I did something to my Gnome and now it won't load. Can I reset everything? When I say "default" I mean the default desktop. Not the default session.
View 4 Replies
View Related
Mar 24, 2010
I deleted the bottom panel when I switched to AWN.
If I decide to.... how can I revert/restore to the default gnome desktop? I can add a bottom panel but can't remember what applets go into it.
A friend wants to buy this laptop and may prefer the default, original gnome desktop.
View 5 Replies
View Related
Apr 3, 2010
I installed KDE as an alternative desktop.(I still have gnome) When I rebooted my system it showed the KDE login screen. How do I restore the default Gnome login screen. I run Lucid.
View 2 Replies
View Related
Apr 5, 2010
I am trying Xfce in my Ubuntu Karmic installation. I just logged out and I get the Xubuntu login screen. I prefer the GNOME one, and xubuntu-desktop sets Xfce as default. I tried editing /etc/x11/default-display-manager and it already says /usr/sbin/gdm.
View 2 Replies
View Related
Mar 23, 2010
After login (Fedora 12, kernel 2.6.32.9-70) under the Gnome shell I see Gnome does not restore my setting (keyboard layouts, the size of terminal fonts). I can call Main menu only by the 3rd click. I touch MainMenu-System-Preference-keyboard and after the last action suddenly all fonts on desktop change his size, terminal window changes to my settings (font, size) and I may to change keyboard layouts by the way which I had choose. Two days ago the full update was made? no progress. How to force Gnome to do it (restore my settings) automatically?
View 4 Replies
View Related
Oct 24, 2010
This is regarding the 'screen' utility. I use an utility called 'HummingBird Exceed' to get the XSession of a linux client on my windows desktop (basically it uses XDMCP). But the pain is that at the end of the day, when I close Exceed, the session gets destroyed. I did lot of searching on the web to know how the save and restore session in Exceed, but failed. However, I found that 'screen' is the utility which keeps the session intact even when you logout. So, I did the following:
a. Logged into the machine using Putty (terminal emulator).
b. Started 'screen'.
c. Issued the command: /usr/bin/gnome-session
I got the XSession on the Exceed and started working. I opened three or four gnome-terminals. But when I logout of exceed(and detach from the screen), the screen displayed a message saying that 'Connection to XServer was lost". Hence I could not restore to this session when I reattached to the screen. how do I use 'screen' so that when I attach to the screen on which I had started gnome-session, it attempts to connect to the Xserver and open the session as it was before detaching?
View 1 Replies
View Related
Oct 22, 2009
I seem to have lost my desktop menu at the top of the screen (for want of the right term the start menu in windows). Can anyone remember how I can get it back or the name and location of the utility I can use to control the look & features of the desktop?
View 3 Replies
View Related
May 25, 2010
I use alsa, and I don't have a volume control applet on my Gnome Panel.When I right click and select "add to panel", there is nothing that has to do with "sound", "audio" or "volume" in the list, and the "Indicator Applet" or "Indicator Applet Session" things have no volume controls, or properties that would let you enable any sort of volume control.
How can I get a volume control in Ubuntu, so I don't have to run aumix in a terminal or something? I've got the thing working now. But does anyone know why the new, fancy "Indicator Applet" volume control doesn't appear? The Gnome Volume Control Applet isn't as nicely featured, although it actually works.
I've been using Linux since Redhat 5, it's beyond me why these sorts of problems are still around. Someone should just put a damn "Volume Control" element in the list of things to add to the panel, even if it doesn't work, perhaps showing an error message.
View 5 Replies
View Related
Jan 26, 2010
Is any easy way to restore deleted files with Gnome Commander (v1.2.8.2)? I have external drive with two partitions: FAT32 and EXT4. I was using GC on Ubuntu 9.10 and it was working fine, today I installed openSUSE and GC is showing only EXT4 partition. Nautilus is showing both and it is working fine though.
View 2 Replies
View Related
Oct 12, 2010
I accidentally deleted the default icons in the gnome panel on the top right. I tried to get them back from the add to panel. I went through every program I could, but none of the original programs were found. I'm running fedora 13.
View 4 Replies
View Related
Nov 20, 2009
Last night I started my computer and loaded my CentOS 5.2 partition (Windows 7 on the other partition). I was able to login to my account, but was given a gnome error that the panel buttons (i.e. weather, cpu monitor etc) could not be loaded. I then went to restart the computer (probably not the smartest thing to do) and was given some file errors upon shutdown that were related to /dev/VolGroup00/LogVol00. After restart I was taken to a shell and ran fsck manually. It seemed to find a lot of bad blocks, so I repaired the /dev/VolGroup00 system and restarted. At this point CentOS seemed to boot normally, but upon loading of the login screen I get the error: Configuration not correct The configuration file contains an invalid command line for the login dialog, so running the default command. Please fix your configuration.
I cannot even log in as root. I get the error /usr/bin/gnome-session: error while loading shared libraries: libgnome-desktop-2.so.2: cannot open shared objects file: no such file or directory. I then went to a shell and ran: sudo yum install libgnome-desktop-2.so.2, but the package was already installed and up to date, so there was nothing to do. I am therefore stuck at this login screen with pull-down menus and tabs where I can change the configuration, add/remove users etc. So, my question is this: How do I restore my user profile so I can login....and if anyone has some insight, what caused this to happen in the first place? I should also mention, this all happened after plugging the computer into a new internet connection. No clue if that's even relevant.
View 11 Replies
View Related
Feb 4, 2010
I'll be away from home for the following weeks (and perhaps months). I want to use the Internet with confidence, so I have setup an old computer with SSH and I'll be tunneling to that (from a netbook).I haven't remote-managed a computer for such a long time and I want to be sure that even if I do a mistake remotely, I can bring the computer back to a good known state.The home computer will reside inside my aunt's house and she knows very few about computers.
I've been thinking about burning a bootable DVD containing a tarball of a freshly configured Slackware. If I mess up, I can phone my aunt and tell her to simply put the DVD inside the drive and press ctrl-alt-del. The DVD boots, un-tars (the fresh Slackware), ejects the CD-tray, waits for her to press Enter, closes the tray, and finaly reboots to my good old known fresh Slackware.
View 8 Replies
View Related
Jun 12, 2010
I was trying to remove a logical volume, but used the lvremove command incorrectly.
I did something like:
Code:
Thinking it would remove somelv from myvg
But instead it said "volume group somelv: not found" and then deleted all the logical volumes in myvg.
Is there any way to restore them or is it reinstall time?
I had some backups of my system, but unfortunately they were stored on a logical volume in the same volume group.
View 6 Replies
View Related
Jul 11, 2011
Like a dummy, I played around with KDE Menu Editor without asking if there was a way to return it to it's defaults, if I screwed it up.
Is there a way to return it to its 'factory settings'?
View 4 Replies
View Related
Aug 30, 2010
When the power twitches, and X is displayed on the current tty. the display resolution is somehow lost. When the system is rebooted and X restarted, the resolution displayed (and the best offered) is 800x600.My resolution of choice is 1280x1024, and none of the configuration files appear to have been changed.The X resolution is unaffected if another tty was displayed at the time. (I am often working on two or three consoles as well as what X is using)In the past it has been sufficient to comb through the file system and delete all the temporary files and caches that seem to be associated with X. I have never been sure if this was actually any sort of solution to begin with, but in any case it no longer seems to work.
linux 2.6.35.0
Slackware64 13.1
Gigabyte: ga-p31-s3g
Intel q8400 (quad Core2)
Matrox g450 32mB (PCI)
View 7 Replies
View Related
May 9, 2011
I think I made one tweak too far and as a result have lost my desktop - no top panel, launcher just a blank screen with my desktop background. I've created a new user and everything is fine under that account so I don't think it is terminal. which files I should delete/replace to restore the desktop back to it's default settings? I've deleted the .gnome2, .gconf and .gconfd folders but that has not solved the problem.
View 8 Replies
View Related
Jul 26, 2010
Recently I've read an interview at Distrowatch, where a topic was the compatibility of Slackware and Zenwalk packages. My understanding was that now they should both be used in both systems.
As Slackware doesn't feature a complete GNOME distribution, my curiosity was about the ability of Zenwalk's GNOME packages play a role there. If so, the second question is how intrusive those packages are considering Slackware 13.1.
View 4 Replies
View Related
Jan 6, 2010
I'm happy to announce Linvo 2009.1 rc6. It's a full-featured Linux distribution with a lot of applications by default, including an office suite (OpenOffice.org extended with plugins), a good internet browser (Firefox extended with plugins), a music player that supports music collection and a lot more - Exaile, a video player, and all the available codecs. It can open all types of file formats. It's a LiveCD, which means that you can test it without installing and after this optionally install it - it has a nice easy graphical installer.
It's the first Slackware-based LiveCD distribution with GNOME by default. It includes NetworkManager and initng in place of sysvinit. It also features accessibility tools. It is also the first release with the innovative portable applications system. This allows you to download application from the site (modules section), place it where you like, and use it. It's just a single file, no directories. You can also use this application without installing it, directly from the internet. However, after this, the speed of the application is limited by the speed of your connection, of course. Check out the "Applications" section on the website.
Besides this, you can install software with the apt-get-like system "slapt-get" and it's graphical front-end: GSlapt. It also contains src2pkg and sbopkg in case you want to compile something from source or existing SlackBuild Depfinder is included to find dependencies of packages. Click here for a guide on how to use those. I also managed to put development tools in there, like GCC, G++, svn, cvs, so on... This is a release candidate, and despite that it's OK for using. It has a bit more things to do until the release (like language selection on the boot menu), but I decided that it's important to put it here for testing.
View 11 Replies
View Related
Jun 8, 2010
When booting into my slack12 fluxbox desktop today my fonts were so small they were hard to read. The same is true if I use kde. I didn't change anything that I can think of. I tried running fc-cache but it didn't change anything. My xorg.conf hasnt changed. Interestingly, my xterm font didn't change size, but the konsole font is tiny like my other desktop fonts.
View 3 Replies
View Related
Jan 4, 2011
I'm interested in seeing what others are doing w.r.t. fonts in a standard Slack install. The 2 main apps I use are Firefox and Thunderbird and both look fairly poor out of the box. Previously I've used a combination of gtk-qt-engine and gnome-appearance-properties ( with a gsb install ) but this doesn't always do the 'right thing'.
View 2 Replies
View Related
Jul 22, 2010
I am browsing the package list for Slackware 13.1, accessible through Slackware.com>Get Slack, and I see the package containing the Gnome desktop enviroment nowhere in the list. Should I conclude Gnome isn't part of the Slackware distributions?
View 14 Replies
View Related
Feb 26, 2010
You might be asking why would I want to this? I will tell you why. My wife. She has grown up using Windows. The jump from Windows XP to 7 wasn't as bad as I thought it would be for her. I just had to show her where things changed to for about 10-20 minutes and that was that.
I did a trial run with Ubuntu for about a month using Gnome and not her cup of tea. So now I did a search on the Internet and came up with a Gnome solution here is the link:
http://aminesoft.wordpress.com/2009/...ike-windows-7/
And a KDE link:
http://www.kde-look.org/content/show...content=104232
But both websites are oriented towards Ubuntu/Kubuntu. I am just wondering if this will work with Slackware???
My wife likes a speedy system almost as much as I do. She also like the Search field when you click on the Start menu in Windows 7, the taskbar at the bottom, the big red X in right hand corner of the windows.
I just hope I can go this route and change it to look like Windows 7. I will be very happy and so will my wife of course.
View 8 Replies
View Related
Jun 30, 2010
I am new to Linux and wow, it did not take me long to run into a huge snag. I am running Suse Linux Enterprise 10 on a laptop and by some strange reason the computer froze from overheating and I was forced to shutdown improperly. Once I restarted it booted right to the command prompt when it usually instead boots to the default user. I managed to get gnome running using the "startx gnome" command. But when gnome loads, none of my normal extentions load like my wireless driver, the sound driver, etc. how to restore gnome to automatically load the default user on start up or fix any other damage I might have done? lol
View 3 Replies
View Related
Apr 21, 2011
I installed the Elegant Gnome theme/package and I uninstalled it after about a week of use. Even after reverting back to the ambiance theme, or other themes, I've noticed that some elements of the Elegant Gnome theme have remained (e.g. the panel color and icons in Chrome or after right clicking and the system font).Is there a way to restore the Gnome defaults or Ubuntu system defaults so that everything is as it should be?
View 2 Replies
View Related