Slackware :: CD Rom Not Mounting - Can't Read Superblock / Fix It?
May 10, 2010
I am newer to Slackware but not to Linux. I am having the hardest time trying to get my CDROM to mount for me so that I can play audio cd;s and the like. I can see that the system knows that my CDROM drive is there and that it works because I installed Slackware 13 from my CDROM drive as /dev/hdc. Now when I put in a cd nothing happens? I have googled away and searched this forum quite a bit before posting this but I have tried almost everything I can think of and what others have mentioned. I have screenshots to show you what I mean. When I try to run the command:
mount /dev/cdrom /mnt/cdrom
I get it as mounting as read only and it says can't read superblock? Now that is fro my slave IDE CDROM on top as hdd. I have tried before to mount it as /dev/hdc but to no avail. I know both CD drives work just fine because I used them to install the system. I am going to put the screenshots below so maybe someone can help me! Also I can eject the top CD drive with the command code...
View 3 Replies
ADVERTISEMENT
Jul 6, 2010
what does this error message mean? im trying to mount an ipod in disc mode. let me know if there is a way to manually mount it to get around this. but not too technical, the simpler the language, the easier i will understand it.
View 9 Replies
View Related
Jun 4, 2010
I'm trying to get some data off of an external harddrive. I get a few errors:Unable to mountError mounting: mount: /dev/sdb1: can't read superblock.I then tried to run a read disk benchmark on disk utility and that seemed okay.I then tried
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 320.1 GB, 320072933376 bytes
[code]....
View 4 Replies
View Related
Jun 16, 2010
I have a x64 OpenSUSE server with two hard drivers installed. The first one is used for the / and /home partitions and the other is for backups. Ironically enough it is the backup hard drive I am having trouble with. I was having trouble writting to the drive and unmounted it to preform a fchsk, however now when ever I try to mount it I get the following error:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Does anyone know who I can repair the drive and retrive data?
View 1 Replies
View Related
Dec 25, 2010
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
View 9 Replies
View Related
Jun 15, 2010
I have a x64 OpenSUSE server with two hard drivers installed. The first one is used for the / and /home partitions and the other is for backups. Ironically enough it is the backup hard drive I am having trouble with. I was having trouble writting to the drive and unmounted it to preform a fchsk, however now when ever I try to mount it I get the following error:
[code]...
how I can repair the drive and retrive data?
View 4 Replies
View Related
Apr 11, 2010
I removed a hard drive from a failed Buffalo LinkStation NAS. The drive was 1TB and formatted in XFS. I installed Debian Linux on my Mac using Virtual Box just so I could get to the files.
When plugin the drive (via USB) two volumes show up, but there's another that I can't seem to open (and may have all of the shared files I need). It's the largest volume (over 900 MB).
I keep reading to run xfs_repair, but when I type that in the terminal, I am given "command not found". I am not sure how to use it.
Also when I try to open the volume I am given "can't open superblock" error.
I am not too familiar with using Linux and ma just trying to get to my files.
View 3 Replies
View Related
Mar 31, 2010
How can i read out the superblock of a filesystem?
View 5 Replies
View Related
Mar 16, 2011
I have a removable USB pen drive, that all of a sudden, when it got 99% used, stopped working. When I try to mount it (manually) I get "can't read superblock". I know there is a ton about this on Google and I've read a lot of them, but most seem to be about formatting a drive, or fiddling in fstab. I'm trying to run fsck on it, and it finds errors, (among them: two FAT-tables?) but then it just freezes, and CPU goes to 100 % and I let it be like that for 4 minutes, before aborting. Scandisk in windows is rubbish (fails to start), and running "chkdsk /f F:", in windows, results in nothing, the shell crashes immediately. Is it normal for fsck to get stuck and just chew up CPU? It does not seem to be reading from the drive, according to conky. Also, is it possible to run fsck as normal user, (at my work)?
View 2 Replies
View Related
Sep 27, 2010
I am unable to boot my server and it is erroring with the message "Kernel panic - not syncing: Attempted to kill init!". Here are the details:
I have a brand new Dell PowerEdge T110 server with Quad-Core Xeon CPU and 2GB 1333MHz RAM. I have installed a hard disk (SATA, 7.2rpm) on this machine that I removed from another Dell PowerEdge T100 server with Dual-Core Xeon CPU that was running software RAID 1.
Now when I boot the new T110 server, it displays the following error messages code...
I am running CentOs v5.5 x86-64. If I put the hard disk back into T100, it boots fine. I do not know why it is not working with T110 server.
View 6 Replies
View Related
Oct 12, 2010
I want to populate an array of string by files exists in directory on mounting of file system. I got an entry point for file system mount. I can use either do_mount function or fill_superblock function. But I am not clear about how to call readdir from there itself. I need inputs for calling readdir from fill_superblock function.
View 2 Replies
View Related
Jul 12, 2010
[URL]
This problem has arrived again.......I tried the same solution but didn't work out...the problem is described below.
I use Ubuntu 9.10 .
I did this in Ubuntu 9.10 live CD.
quote from terminal :-
ubuntu@ubuntu:~$ sudo mkdir /win
ubuntu@ubuntu:~$ sudo mount /dev/sda5 /win
ubuntu@ubuntu:~$ sudo mkdir /vdisk
ubuntu@ubuntu:~$ sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk
[Code]....
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
ubuntu@ubuntu:~$ "
> ^C
ubuntu@ubuntu:~$
^^ quote ends.
View 4 Replies
View Related
Aug 15, 2011
I got a CentOS server + KDE from a server (which I had no contact until now), he had 2 HD's one for the system and another for files.
I brought the HD system home to try to make it run on a virual machine (VMware) so I can do some testing before you put in practice.
But already converted the VMware HD to the system, it tries to start but it shows some errors and in a message "kernel panic - not syncing: attemped to kill init"
I think the drivers are correct, has edited the file "/ etc / modprobe.conf" edited these entries equal to another I installed CentOS on VMware.
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptspi
ata_piix alias scsi_hostadapter2
Look at the picture attached the full error.
Link to large image
Link to large image
View 1 Replies
View Related
Oct 23, 2010
i used to have ubuntu 9.i decided to move to sabayon so i used the live cd to install it ,resize the ubuntu partition and use the remaining space for sabayon.while the resizing procedure i got an error(i dont have a copy of the error log file but i know it has something to do with an anaconda process).i aborted the installation and the result was an filesystem that couldnt be mounted.when i try to mount the hdd i get this:
Code: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so and this is what i get from fsck: Code: $ sudo fsck -f /dev/sdb1
code....
View 5 Replies
View Related
Apr 18, 2011
Ubuntu 10.04 has just failed to load from my hard drive, so I've resorted to booting from CD just to get the machine going.I'm wondering if my main boot drive has gone caput??When trying to mount it using DISK UTILITY...get the message: Error mounting volume
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so
View 5 Replies
View Related
May 14, 2011
After several crashes during videos it seemed like a good idea to fsck root. Downloaded the latest systemrescuecd and ran it at boot. The error message was 'bad magic number, corrupt superblock' with a suggested command to try another superblock. That failed with the same message. Tried tune2fs to force fsck at boot and got the same message. The drive is less than 6 months old and the installed system is working more or less ok. The command I used was 'fsck.ext4 /dev/sdc2'. What am I doing wrong?
View 9 Replies
View Related
Jan 5, 2010
/dev/hda8 is /home on this laptop. It must have been reading/writing when the battery died and now /home won't mount. I get the "is this a zero length partition?" error when running e2fsck. I've searched a bit and have gotten *mount -o sb=n /dev/hda8 /home* as a potential solution but I'm confused about the value 'n' suggested. When run as I wrote it, it fails with a 'no such partition' error. Can anyone point me to a solution for re-creating the superblock to get this partition mountable again?
View 4 Replies
View Related
Jul 9, 2010
I have an external Western Digital Hard drive with two HFS partitions with journaling disabled.When I connect it to a computer running Linux (Debian or Ubuntu), frequently both partitions are mounted read-only. In the past, mounting them on my Macbook and executing the command to disable the journaling often worked (even though it would tell me that journaling was already disabled) but I would love to have a solution which works every time.
View 1 Replies
View Related
Mar 1, 2011
I have a .dd file from testdisk on an external hard drive. how do I mount this image to read it?
View 9 Replies
View Related
Jan 28, 2011
I made a modification to the /etc/fstab using Ubuntu 10.04 and now it wont boot correctly. I can get the cli but when I enter /etc/fstab and make an edit it says" changing permission of /etc/fstab: read only file system"How can I mount the partition so that I can edit it
View 6 Replies
View Related
Feb 11, 2011
I have successfully mounted the NTFS partition containing win7 via Ubuntu.
I followed these 3 steps:
Code:
Now I have unmounted the partition and want to remount it again except this time so that it is mounted as Read-Only.
View 1 Replies
View Related
Jul 14, 2011
When i boot from live USB, i can't write anything to it, because the 'Filesystem is read-only'. How can the boot USB be mounted as read-write? Maybe some boot options are needed?
View 2 Replies
View Related
Jan 28, 2011
I made a modification to the /etc/fstab using Ubuntu 10.04 and now it wont boot correctly. I can get the cli but when I enter /etc/fstab and make an edit it says" changing permission of /etc/fstab: read only file system" This is what I get when the system boots:
PHP Code:
[code]....
so if I choose manual I get to the cli and whenever I attempt to edit the file I get the above error. I used another machine and attempted to mount the drive but I get the same error I added notaime option to my fstab by accident so if I choose manual I get to the cli and whenever I attempt to edit the file I get the above error. I used another machine and attempted to mount the drive but I get the same error. I tried
PHP Code:
[code]...
and I get
PHP Code:
[code]....
How can I mount the partition so that I can edit it?
View 2 Replies
View Related
Jul 24, 2009
Anybody know how to make an ext3 or 4 partition start up at boot with only the owner and its group having read and write access permissions.I don't want 'others' to have folder access. This is what i have done. / etc/fstab:/dev/sdb5/media/Data ext4 owner 1 2 The folder starts on the boot since it has been allocated a folder as u can see. Next i changed the the ownership and the group ownership of the folder:chown johnny:johnny /media/DataThe problem is that other users can few my partition since 'others' have read access. How do i change that to zero access?
View 1 Replies
View Related
Sep 7, 2010
I'm trying to mount my new Western Digital Elements 2tb hard drive, but every time I try to plug it into the computer I get this error message:
Quote:
Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS),
[code].....
But when I tried opening the hard drive from nautilus I still got the same error message as above (no other volumes was connected at the time). I've also tried opening and watching it in GParted, and I can see it there as a volume that's not allocated. When I tried to allocate the hard it I got the message that it had no partition table. And that I cold make one. I tried and Ubuntu suggested to make a MS-DOS partition table for it. But there I got a little scared as I've not done this before. The external hard drive is brand new and was brought today. And I don't have the possibility to test it with Windows or Mac as I'm using Linux only on my machines.
View 6 Replies
View Related
Feb 17, 2010
I am trying to listen to an audio cd but when I try to find it, either through an ikon on the desktop, (XFCE), or through a media player, -Amarok - vlc, the file manager, (Thunar), nor even ultimately the Terminal, can I find anything in the CD-rom drive when a music CD is played in it.I can easily copy the contents of the CD to my home directory using cdparanoia.When I place a CD with an ISO image or a DVD from Linux Format, for example, I have no problems opening or browsing them.I had also run alsaconf and it completed easily. But still nothing shows up, and the superblock error is still there.
View 7 Replies
View Related
Jul 1, 2011
I have two computers both running slackware on the same network using ext3 filesystems.
What is the easiest and most secure way to mount one drive to the other computer?
View 5 Replies
View Related
Mar 30, 2010
when I login as a user and went to KDE environment, I wasn't able to mount a device because access was denied. What is the best way to achieve this?
View 2 Replies
View Related
Apr 15, 2010
I installed slackware 13 to an 80gig drive on a box that also had an encrypted LVM created by Fedora. I can not seem to mount the drive from slackware even after opening the lock.
However, I cvan not boot the older fedora image due to UUID changing names. I tried to correct the UUID via a boot disk and am unable to do so. I have only read access to the 750gig fedora partition. Slackware fails mount with unknown partition type.
I can see my data but not pull it off.
View 2 Replies
View Related
Oct 7, 2009
I have Fedora 8 and we just switched over from a Windows "File Server" to Windows Server 2008 (10.1.1.17). I updated my fstab file and now when I go onto the Windows folders, I can list and read files, even save them, but new files are always read only.
fstab file (some, without the asterisks):
//10.1.1.17/USERS/Jeff/fs /home/mriuser/Desktop/fs cifs rw,username=jsadino,password=**** 0 0
I've tried ntfs-3g, auto, ntfs, smb, some umask combinations, changing ownerships, changing permissions, everything I could think of, but still can't modify new files.
[root@localhost tmp10]# mkdir tmp2
[root@localhost tmp10]# cd tmp2
[root@localhost tmp2]# touch tmp
[root@localhost tmp2]# ls -l
[Code]...
View 3 Replies
View Related
