for some reason ktorrent goes "stale" after a while, with all torrents showing as stalled. each torrent shows only one peer each, even though the tracker statuses show a lot of seeders. exiting ktorrent and restarting it seems to get things moving again.
View 4 RepliesWhen I run lilo (/sbin/lilo), it messes up my /boot partition. Next time I try to mount it after running lilo, I get an error: "mount: Stale NFS file handle" (I define -t ext2). My /boot partition is ext2, mounted locally, and not nfs. Then I do fsck /dev/sda1, and I get several: Free blocks count wrong for group #0 (7665, counted=5063). Fix<y>? I say yes to all and it works normally afterwards. This happens only after I run lilo. Lilo is installed in MBR.
Here is relevant configuration:
Code:
root@darwin:/home/cabrilo# cat /etc/lilo.conf
append=" vt.default_utf8=0"
boot = /dev/sda
bitmap = /boot/slack.bmp
bmp-colors = 255,0,255,0,255,0
bmp-table = 60,6,1,16
bmp-timer = 65,27,0,255
prompt
timeout = 30
change-rules
reset
vga = normal
image = /boot/vmlinuz
root = /dev/sda3
label = Linux
read-only
This is my partition table:
Code:
root@darwin:/home/cabrilo# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8f800200
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 144 1052257+ 82 Linux swap
/dev/sda3 145 3432 26410860 83 Linux
/dev/sda4 3433 19457 128720812+ 83 Linux
And this is my fstab:
Code:
root@darwin:/home/cabrilo# cat /etc/fstab
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext4 defaults 1 1
/dev/sda1 /boot ext2 defaults 1 2
/dev/sda4 /home ext4 defaults 1 2
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View RelatedI currently have a home network setup so that my main machine shares it's external hard-drive via NFS. This has been working perfectly for months, however I just got a new laptop, installed openSuse 11.3 x64 and set everything up. Now there is two folders on the external network mount that won't let me do anything and always just return Networking: Stale NFS File Handle. The system still works fine under my old openSUSE 11.2 x86 laptop. I have tried unmounting the drive from the laptop, restarting the NFS client, and restarting the NFS server on the main machine. None of these have made a difference.
It is only these two folders that are effected. Everything else works just fine.
I did a backup of the ssd on my eeepc using the following command from a Linux Mint on a USB key:
dd if=/dev/sda1 of=/media/disk/eeepc_save/SYSTEM/system.bck
(/media/disk in an external USB disk)
I deleted the ext2 partition using GPartEd on live USB key and created it back. I rebooted Linux Mint and restored the filesystem using the opposite command :
dd if=/media/disk/eeepc_save/SYSTEM/system.bck of=/dev/sda1
I mounted /dev/sda1 and when I "ls" the root directory, I get several "NFS stale file handle" messages concerning directories (/dev and other). I tried "e2fsck -y", had a bundle of corrections that resulted in the deletion of the directories. I don't use NFS. I did the same for the user filesystem and had no problem (it's an ext3 partition). The two filesystems are the ones that came with the original Xandros installed on my eeepc and that were mounted with union-fs.
I've got something showing up in my /mnt directory that I can't figure out how to get rid of. If I try to delete it, I get, "ERROR: Stale NFS file handle". I've tried googling it, but the only solution I can find is "remount and then unmount your NFS server". The trouble is that I don't have any NFS servers - it was a mountpoint for a squashfs file. Trying to remount the squashfile just gives the same error message. My best guess for how it was created is that maybe the file was deleted while mounted. Surely there is a way I can get rid of it? It stuffs up my system by e.g. preventing find from working. I'm running Puppy Linux 4.1.1, although I suspect that is irrelevant.
View 4 Replies View RelatedWhen using rsync to copy from one NFS mounted filesystem to another mounted NFS, rsync displays "stale NFS file handle" while attempting to issue a chmod after each file is copied. The files appear to be written successfully but the owner and group show up as "99." The source file system is mount USB ext3 drive and the target is a Buffalo TeraStation TS-XL/R5.
View 6 Replies View RelatedWe have Linux server in our environment for application development. In this server we mounted so many NFS share from Storage. Past few days we receive this error in
syslog kernel: nfs_statfs64: statfs error = 116
Some user fased this error "Stale NFS file handle"
Server info
OS= RedHat
Kernel = Linux hostname 2.4.21-47.ELsmp #1 SMP Wed Jul 5 20:38:41 EDT 2006 i686 i686 i386 GNU/Linux
I have Puppy installed on an old laptop and one way or another I ended up with a file inside /usr/bin that has the Stale NFS file error. I've tried to look around for a way to fix it but all places I've looked have only been for the situation where it's on a drive you're able to unmount. At least I think they were. I certainly don't know what I'm doing well enough to know for sure. Obviously restarting the computer has been tried as well as attempting to unmount things, but I can't unmount the drive that is running the unmounting.
View 3 Replies View Relatedi am new to linux, i have installed opensuse 11.3 can anyone please tell me how to configure ktorrent so that it can download things???
View 9 Replies View RelatedI've got a problem while accessing the /etc/sysconfig/network-scripts/ifcfg-wlan0 file, CLI's throwing: "Stale File Handle" - there's no access to this file. Problem is the same regardless wlan0 interface is up or down.
View 2 Replies View RelatedI get this error which means I cant visit websites. I cant rm, cp, mv, vi, ... this file. How do I regain the ability to browse the internet? Is there a way I can create a /etc/resolv.conf2 and have my system use that instead?
View 4 Replies View RelatedIs it possible to run ktorrent from a command-line, or more to the point:from a cron job I like ktorrent, it does it job well. But it bugs me that I have to log inand remain so, just to run an app who's interface is not even required mostof the time.Unfortunately, my provider imposes a montly volume. Nice big volume, but notimposible to run it dry. On the other hand, they count nightly traffic atonly half to actual volume.So I'd like to be able to start ktorrent at a certain time after midnight,and interrupt it at dawn. Or maybe just shutdown the machine at dawn.
View 2 Replies View RelatedI've noticed this weird behavior where kTorrent would just stall downloading stuff if left on its own for a few hours. Once you activate kTorrent window from the panel it just gets on with the job, changing status from "stalled" to "downloading" in a few seconds.
Could it have something to do with the external disk I'm downloading on (some of the downloads, not all) being physically different one and connected via usb but mounted in a home directory?
I suspect this because Windows machine connected via samba also loses connection after a while as if there's some "time expiration" set on mounting drives into home.
Here is the fstab line for the suspected mount:
/dev/disk/by-id/usb-Seagate_FreeAgentDesktop_3QK0A0N7-0:0-part1 /home/stan/Seagate ext2 acl,user_xattr 1 2
Is there a way to see the global statistics in KTorrent? I'm referring to the overall share ratio and the total amount of data downloaded & uploaded. - not for the current session, but an all-time info edit: KTorrent version 3.3.4
View 1 Replies View Relatedi'm using ktorrent 4.0.3 but 4.0.4 is out. how do i upgrade?
View 2 Replies View Relatedplease tell how to install ktorrent on ubuntu 11
View 1 Replies View Relatedis there a more up to date version of ktorrent available and is so where can I find it.
View 1 Replies View RelatedMy hibernation was working out_off_the_box but now it has strange issue. This is debian testing with kernel 2.6.38.4 "hibarnation-disk" hibernate successfully ,with an error though ( seen from hibernate-disk -v2 --dry-run) hibernate-disk:Warning: Tuxonice binary signature file not found Anyhow , after executing the hibernation , on the next boot, the system boots from scratch and not from the resume image. During boot a message is displayed though Invalidating stale software suspend images I have done some google search but none of the solution work so far, including reinstalling the package itself.
View 6 Replies View RelatedA FC10 server hung and had to be power-cycled. I suspect it hung because of an nfs mount timeout.
Now it does not boot. The error is libc.so.6 not found. Kernel panic. Attempting to kill init.
Booting under rescue:
ls: cannot access libc-2.8.so: Stale NFS file handle
Is there a way to reboot to a clean state? There must be some NFS cache file.
I also tried to cp rescueCD:/lib64/libc-2.8.so to the old lib64 dir, but get the same "Stale NFS file handle" message.
Ktorrent crashes on start (64bit). After update.
View 11 Replies View RelatedI have KDE DE in openSUSE 11.4 Tumbleweed.
The issue is with Ktorrent.
When I put the machine to sleep (suspend to ram) with Ktorrent running and then wake the machine up again, the torrents that were working do resume. But they resume in a very poor fashion, continually going into and out of "stalled" status. This bad connectivity continues indefinitely.
I have to kill Ktorrent and restart it to get good data flow back for the torrents that are running. Is there an explanation for this? And is there something I can do to make the torrents resume nicely when I bring the machine back from sleep?
Running openSuSE 11.3 w/ a KDE 4.x desktop. Every time I'm using KTorrent, when I come back into the office and "wake" the monitor, I find KTorrent has crashed and I have to restart it. So I'm guessing that KTorrent is crashing either when my monitor goes to sleep mode or when I'm waking it up. I've tried changing some settings but when the system is running, I cannot seem to access the monitor control panel. Pressing the menu button on the side of the monitor does not bring up the monitor menu. There used to be an easily noticed "Desktop Settings" in KDE 3 but I'm not finding the equivalent in KDE 4. How to keep this Samsung SyncMaster 997DF 19" CRT from going into sleep mode?
View 6 Replies View RelatedI am trying to download the same torrent from Win7 and from Ubuntu 10.10..
In Win7, am gettingg a download speed of 102Mb/s whereas in Ubuntu only 40 Mb/s...
Do i need to configure something..
I'm trying to have Ktorrent start a torrent download without having to confirm the download in the Ktorrent menu. Is there an option to do this?
View 8 Replies View RelatedI have resolvconf installed to prevent multiple programs from fighting to update /etc/resolv.conf at the same time an corrupting it.From what I understand resolvconf a package found in the repos is suppose to act as the gatekeeper to /etc/resolv.conf and all programs must go thru it to update resolv.conf. Hence /etc/resolv.conf is written in a orderly manner.
from time to time though something goes awry and resolvconf writes old, wrong stale into /etc/resolv.conf, for a connection that may be down or no longer exists along with the correct info for the current connection.Usually i would fix this by uninstalling and reinstalling the resolvconf package.I was tired of this so i went digging around in
/etc/resolvconf and found the subdirectory
/etc/resolvconf/run/interface
This is where it looks like resolvconf caches interface info that goes into
/etc/resolv.conf
I think what happens is resolvconf is suppose to clean this up in an orderly way but sometimes old interface files may be left here.So for instance in mine were the files eth0 and wlan0.with dns info for each stored in the relative file. I no longer have an eth0 only a wlan0 so resolvconf was still pulling info from both
/etc/resolvconf/run/interface/wlan0 and /etc/resolvconf/run/interface/eth0
with the result of an incorrect dns info in /etc/resolv.conf To make a long story short I just deleted /etc/resolvconf/run/interface/eth0 and was good to go. So if you are using resolvconf and run into this problem you may use this work around.
I know PHP auto removes stale sessions on it's own, but that doesn't remove them from the MYSQL table. So I was gonna make a cron script that ran once every hour that removed any MYSQL shopping cart item from the table if the original session_id that created it does not exist anymore.
From my understanding a session_id is an "actual" file located somewhere on the harddisk (is it not? correct me if I'm wrong), so I was going to do a simple check for each item in the shopping cart to check for it's original session file, if it didn't exist on the harddisk, then simply remove it from the mysql table.
Right now I am using Fedora 10. and I am downloading Fedora 10 by torrent. My problem is that if my system monitor show me that I have downloaded 90 MB then ktorrent showing 30 mb so I am loosing lots of MBs. When I as using windows and utorrent that problem never happens. How to over come that?
View 4 Replies View RelatedAfter I finish a download in ktorrent, the torrent stops seeding.
A couple of notes: my download speeds are fantastic (~6mb/s), while my seeding during download is about 60kb/s. However, this seed speed seems to fluctuate a lot from about 3kb/s. Once the download completes, the seed goes to 0kb/s, and the torrent doesn't find as many leachers. For now, after I finish downloading, I re-download a portion of my download at a limited rate of 1kb/s so that the seed continues.
Lastly, I am currently running through a VPN server, however I this issue happens even if I'm running a normal connection.
When I am running Ktorrent it takes about 30 seconds for a web page to open, in stead of 1 or 2 seconds. The download speed is very slow 200B/s and the status of most of the torrents is "Stalled". If have opened TCP and UDP ports 36477 4444 6881, 7881, 8881 and added them to the port forwarding list in my router. No difference.
View 9 Replies View Related