I am facing an issue with my syslog server. The server is collecting remote log also. and the issue is no log messages are updated in /var/log/messages file. But other files are getting updated.
[root@Server1 ~]# cat /etc/syslog.conf
# Log all kernel messages to the console.
# Logging much else clutters up the screen.
[code]....
I am facing a problem while trying to log SSH messages in a separate file, say, /var/log/ssh_logs. I have tried modifying the syslog-ng.conf file as follows:
filter f_ssh { facility(auth, authpriv) and match("sshd[[0-9]+]:"); };
destination d_ssh { file ("/var/logs/sshd_logs"); };
log {
[code]....
But still I am not able to get the ssh logs in the new file. They continue to go to /var/log/auth.
I've just configured my Linksys RVS-4000 router to syslog messages to remote syslogd server (i.e. my CentOS5 machine). Redirecting messages was easy, but now I'm having difficulties to redirect those same messages received from Linksys to a separate log file. By default, all these messages are logged to /var/log/messages, and after browsing manual pages for syslog, syslog.conf, and syslogd, came to suspect that what I want isn't possible.
View 1 Replies View RelatedWhat is the easiest way in Linux to convert syslog messages to XML?
View 1 Replies View RelatedI have the following BIND messages filling up my SysLog that I'm hoping someone can explain to me:
Code:
Dec 9 09:35:44 dns2 named[30103]: client 67.130.224.5#49551: query (cache) 'www.domain.com/A/IN' denied
Dec 9 09:35:47 dns2 named[30103]: client 67.130.224.5#64561: query (cache) 'www.domain.com/A/IN' denied
[code].....
I would expect this behavior if "domain.com and anotherdomain.com" wasn't a domain that I hosted. But this is a valid domain that this server should be answering for. In my named.conf I do have the
Quote:
allow-query { any; };
option on every zone. This is my slave server and I have the primary shut off so I can test this slave server. FYI: So far queriers still seem to be working. The pages for the sites are still coming up via the internet.
RHEL 5.4 i want to be able to do redistribution of inbound syslog messages to syslogd. as example, my syslog.conf has in it at the end:
*.* @192.168.5.5
*.* @192.168.5.6
my sysconfig/syslog file has "-r" as the only option for syslogd. any messages generated by the localhost will be sent to the two remote servers, but messages that come into this box (udp 514) only get logged locally and do not get sent out to the remote hosts.
you may ask why do i want to do this. because i have several syslog servers (for security purposes) and many of my net devices are configured to send syslog to all the syslog servers, hence each device is sending way too much duplicate udp-514. so i would like to minimize the udp-514 coming out of the devices, have all devices send to a central syslog server, and then central syslog server do distribution to the other syslog servers. others have also called this "syslog proxy". or, if not with syslogd, how to achieve this (preserving the original syslog message host info, etc)?
I wrote a script which will run in ubuntu box and will display in tty1, without loading the gdm. The problem is when I plugged in a usb drive it will cause some messages to be printed into the current tty user logged in.
Like : [sdb] Assuming drive cache: write through
This is really disturbing when a user is running the script. Is there anyway that I can direct all the messages to some other tty which I don't use.
I want read the log messages to my 'c' application , i am using the fedora core 8 operating system , how to read the system log messages(syslog) through my application.
View 3 Replies View RelatedGot a Ubuntu system. Have a device on my LAN that can send Syslog messages.
I would like to:
1. Capture these specific syslog messages.
2. Keep them separate from any other syslog activity on the Ubuntu system.
3. View these syslog messages later.
Is there a way to send syslog messages through SNMP? I'm not finding much info online around this. A co-worker said it was easy to do. RHEL5.5
View 1 Replies View RelatedI am looking for an open source syslog server which accumulate the each and every log of Windows, Solaris, Linux and network devices. Currently I am using Syslog-ng which is not fulfiling my requirement in Windows clients, as I need the logs of every action which user performed after logon.
View 2 Replies View RelatedOn this Ubuntu 8.04.4 LTS server, I want to log the messages from a Linksys router. So I made this change to "/etc/init.d/sysklogd" SYSLOGD="-r" Then in "/etc/syslog.conf" I added the following to the top of the file: Code: if $fromhost isequal 'Linksys' then /var/log/Linksys.log & ~
Then I rebooted the server. But there is no "/var/log/Linksys.log" file.
I have my system set up to where the router(dd-wrt) will send it's syslog messages to my Linux PC system. I am using shorewall as my firewall. I have two questions: How can I configure shorewall to allow the messages from my router? If I use my router IP address to allow the messages to come through the firewall, will this be a great security risk as anything from the internet can come through on that router ipaddress?
View 1 Replies View RelatedI'm getting 10000000's of syslog messages :
"eth0: PHY reset until link up"
- I have wireless and don't normally use an ethernet cable. From Googling round I found this bug report https://bugs.launchpad.net/ubuntu/+s...ux/+bug/270184 which appears to match the problem, however I do not feel happy/competent enough to recompile the driver as suggested in the bug fix. Is there a way to configure the driver so that it only tries the eth0 connection a limited number of times? This is Ubuntu 8.04 2.4.26-27 and SIS 191 chipset
What i'm trying to accomplish seems rather silly but is needed for my little project here.
I'm using OpenSuSE 11.2 as a media center PC and need it to login automatically(console not X). That one i accomplished without problems.
However, after login i can see all the info about the services that were started and that needs to "go away".
One could do a "clear" in the .bash_rc and or .bash_profile but it will still show the login prompt which i don't want to see either (i don't even want to see the blinking cursor as well).
Question: How do i accomplish that so that the login console shows only the "splash screen" without any output of the kernel,rc.status nor the "issue-file"... just a plain blank screen ?
I need to be able to send snmp traps based on certain severity or content of syslog messages. Can this be done from standard linux? Alternatively, are there MIB's out there that support syslog events so I can get the status from snmp?
View 1 Replies View RelatedGNOME has adopted the pulseaudio infrastructure and it has grave errors reading from ALSA sinks. One of the many effects is that every 2 or 3 seconds a 3 line error message is written to the syslog to the effect of 'ALSA woke us up...blah blah blah' and it is filling up everyone's syslog. What I need is a workaround to just stop these messages from being written so I can level set and figure out a long term course of action.
View 2 Replies View RelatedWe have several SLES, CentOS, Fedora server and use logmail to filter the logs on our central syslog-Server. The problem is, that the filtering take more and more time and the configuration gets more and more confusing. What program to use to analyse our central logfile? Something mysql based?
View 1 Replies View RelatedI'm running a cobalt raq550 web server (Linux version 2.6) and I want to install a syslog program on it, something that could log messages and send me an instant email in response to certain messages it receives. Is there such a program?
View 6 Replies View RelatedI wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...
[code]....
I got the "The file '/var/log/syslog' does not exist." message when I tried to run KSystemLog as well as "The file '/var/log/auth.log' does not exist." when I tried to view the authentication log. There is no icon beside the items "Krfb," "KSystemLog," and"Nepomuk Backup" in the "System Tools" menu of Gnome.
View 9 Replies View RelatedI have a Tomato router and it has the capability to have its logs go to a external server. syslog is the obvious choice for this. So I enabled remote logging on my linux server's syslogd (syslogd -r) and I can see all of the logs in /var/log/syslog. What I want to do is take everything that comes from the IP of my router (10.0.0.1) and divert it to its own file like /var/log/tomato to avoid polluting my syslog with external logs.
I can't find any examples of someone doing this. My only solution is to get a script together that strips out any line in /var/log/syslog with 10.0.0.1 in it and puts the line into /var/log/tomato and have the script run as a cron job, but that seems unnecessarily messy.
Unless someone knows that there is a solution, I'm 95% sure that syslog doesn't support this after reading more in-depth of the man page. So I need to migrate to syslog-ng or make a crazy script that runs with cron.
I was checking my syslog.conf file recently and it seems that it is an empty file >_> it shouldn't be correct?
View 2 Replies View RelatedAMD64, Ubuntu 10.10 64bit os, with onboard video.Works really well all the way to 1680X1050 resolution, but I get this error every 10 seconds added to my syslog.
View 9 Replies View RelatedI have a self-made application running on a small embedded Linux device (which should not matter) using syslog to output some error, warning or debug logs.There is a "better" syslog daemon installed, called syslog-ng, which have some more features,t I miss a very important one:How to limit the size of the logfiles to some dedicated megabytes. I was able to create rotating logfiles with the configuration in syslog-ng.conf:
Code:
destination testlog {
file("/var/log/test/log-$S_WEEKDAY"
[code]...
trying to replace syslog with syslog-ng. When I:
yum erase syslog,
wants to remove everything else that (presumably) has syslog as a dependency. how do I replace the dependency on syslog with a dependency on syslog-ng?
How to set up syslog server on Fedora 10 Linux server ?
View 1 Replies View RelatedIm trying to get syslog-ng to log ssh stuff to a own file (later i want it to be forwarded to a other server but thats a later problem.
The thing is that if i restart my syslog-ng server and login with ssh, it logs it. but when i login again it dont. But if i restart the syslog-ng daemon again it logs again, but only once.
Here is my config.
Code:
I noticed in my system that my root partition is getting full. I found a lot of old compacted syslogfiles. Had a look at etc/sysconfig editor eg cron but could not find a setting which allows to delete files older than a month. Where and how could I influence this ? I deleted manually all syslog files older than a month. Approx 6GB
View 9 Replies View Related
