Server :: Setup HOME_PATH For Java And CATALINA_HOME
Nov 18, 2010
I need to set up the environment variable JAVA_HOME and am little bit confused with conflicting information. When I run java -version ie get
Quote:
java version "1.6.0_18"
OpenJDK Runtime Environment (IcedTea6 1.8.2) (fedora-43.1.8.2.fc13-x86_64)
OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode)
[Code].....
I have Apache Tomcat up and running and need to setup CATALINA_HOME. In the usr/share/java directory, I have a directory "tomcat6" as well as a tomcat6 directory in /usr/share/.
I have found so many articles on the web but no 2 articles are similar. I tried to browse Sun's "Path setup tutorial" but it seems it is not available anymore.
View 4 Replies
ADVERTISEMENT
Jan 4, 2010
If you hadn't guessed it from my last 3000(ish) java-related posts, I'm a Java n00b writing a Java Applet for a work project. I got to the part was I was about to write the applet code that would send HTTP requests to my CGI scripts. But I read some paragraphs in a book praising Java servlets as better that CGI because they are easier to use and give much better performance server side. My server load isn't very big, though, and I was wondering if it would be worth taking the time to learn about Java servlets and how to set up the server side configuration on my Fedora web server.
View 3 Replies
View Related
Jun 4, 2010
OS: Centos 5.5_x86
I've searched quite a bit for how to set up Java environment variables with the newest java JDK. I installed java using the following commands:
yum groupinstall "java development" (I need it for the application I am trying to run)
yum install "java"
I have them both installed however I can't seem to get java to function. The application I am trying to run requires that I set java environment variables any solutions?
View 1 Replies
View Related
May 6, 2010
i have added a tomcat startup service using chkconfig. I have set up JAVA_HOME and JRE_HOME as well ass alternatives to point to the correct location.I have an init script in /etc/init.d. When i start the tomcat service using [ /etc/init.d/<x> start ] everything works fine and the environment variables for JAVA_HOME and JRE_HOME are used correctly.Now i added the service <x> using chkconfig --add so that it can start on boot up. But now the service does not use the system environment variable for JAVA and JRE setup by me.Also after complete bootup if i try to start the service using [ service <x> start] the environment variable in the shell are not used. don't want to exclusively declare variables for JAVA_HOME and JRE_HOME in the init script.
View 2 Replies
View Related
Jan 19, 2010
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
View 3 Replies
View Related
Apr 24, 2011
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies
View Related
Oct 22, 2010
How to setup a SMS server using Linux, also want to know the appropriate Linux distribution to setup a SMS server.
View 2 Replies
View Related
Jul 26, 2010
I've just installed java (jre-6u21-linux-i586.bin) on Red Hat 4.4 AS and issued this command to check the java version: java -versionand got :bash :java: command not found
View 4 Replies
View Related
Feb 2, 2011
I try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies
View Related
Feb 23, 2011
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies
View Related
Mar 31, 2010
I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
View 2 Replies
View Related
Feb 7, 2011
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies
View Related
May 25, 2011
I was wondering how I would go about installing Java on Ubuntu Server. I need it for my Minecraft server.
View 6 Replies
View Related
May 13, 2011
I am the new user of linux and installing eclipse IDE in the ubuntu server10.10. I have followed the steps given in the links [URL] and [URL]. After installing sun-java6-bin, sun-java6-jre and sun-java6-jdk, java is not running in my ubuntu server10.10. and got error like this
$ java -version
Error: could not open '/usr/lib/jvm/java-6-sun-1.6.0.21/jre/lib/i386/jvm.cfg'
$ javac -version
Error: could not open '/usr/lib/jvm/java-6-sun-1.6.0.21/jre/lib/i386/jvm.cfg'
$ javac HelloWorld.java
Error: could not open '/usr/lib/jvm/java-6-sun-1.6.0.21/jre/lib/i386/jvm.cfg'
$ java HelloWorld
Error: could not open '/usr/lib/jvm/java-6-sun-1.6.0.21/jre/lib/i386/jvm.cfg'
View 1 Replies
View Related
Aug 18, 2010
I am still confused about the memory issues. i have allocated JAVA_OPTS='-Djava.awt.headless=true -Xms512M -Xmx512M -XX:MaxPermSize=512M' think that it means that i have allocate java to use only 512mb of my memory. but when i run top here is my output.
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
15932 root 23 0 1495m 1.2g 3732 S 12.0 36.0 121:52.98 java
5070 postgres 15 0 55392 39m 35m R 11.6 1.2 0:51.61 postmaster
[code]....
View 6 Replies
View Related
Jun 22, 2010
Is it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies
View Related
Apr 21, 2010
I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
View 6 Replies
View Related
Mar 27, 2010
I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
View 9 Replies
View Related
May 19, 2010
I want to set up moodle and need to give my computer some capability to act as a server. I am following the steps at [URL] although my question is not really related to moodle. Here is the problem: setting everything up to make my computer accessible from outside has worked so far. I got myself a static IP address using a dynamic dns server and can ssh into my computer from any other computer connected to the www. So,
[Code]....
View 3 Replies
View Related
Jan 16, 2010
How to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
View 1 Replies
View Related
Aug 30, 2009
how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies
View Related
Aug 29, 2010
I need to setup a Linux VPN server at work for resources' sharing, I currently have a server running CentOS 5.4, and tried endless tutorials on the web, but to no avail, and can't find where the logs are kept for the VPN server to check where the error is. But all my attempts to try to connect keep failing.
View 9 Replies
View Related
Mar 21, 2010
I have a few friends that have seen me bypass firewalls with a socks proxy (SSH). I explained on how it works and how secure it is for browsing the Internet and checking your email in public places. I had at least 6 asked me if I could set up an account on my server for them and they would pay me! Now what I wanted to know was how I can set this up in a server and website where they can register an account and pay me through PayPal! I don't need help setting up the site! Just on how to set up the server to automate this. What tools are needed (ex. ISPConfig, jailkit.... stuff like that?) I don't mind doing this manually but if I get more people that would like this I don't really want to do every single one.
View 1 Replies
View Related
Jun 13, 2011
I try to install the java plugin but the java test pages show not installed. I have tried the openjdk-6-jdk package and the Oracle/Sun 1.6.0_26 version to no avail.
Is there some good instructions page someplace? I have yet to find a set of instructions that provides something clear that works.
View 5 Replies
View Related
May 29, 2011
Code: ~ $ /usr/java/jre1.6.0_25/bin/java -showversion Error occurred during initialization of VMjava/lang/NoClassDefFoundError: java/lang/Object
That's the error I get. When trying to run a java app with the firefox plugin, the browser simply crashes if it's the 64bit java or tells me it's not installed if it's the 32bit version.
I'm at a loss as to what to do. I think it has something to do with leftover gunk from a previous version I misinstalled(Is that even a word?) Anyway, the only thing that google could come up with was a solution for windows which laid blame on Bill Gates for having a bunch of pf (java prefetch) files stuffed into c:windows for no apparent reason. The solution was to delete them, but I can't seem to find the java prefetch folder in linux. The method I used is downloading the rpm from java.com the rpm2tgz then installpkg then cp libnpjp2.so to firefox plugins folder.
View 8 Replies
View Related
Oct 5, 2009
How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
View 2 Replies
View Related
Mar 16, 2010
I am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
View 4 Replies
View Related
Jan 21, 2010
I'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.
Is it possible to do this with no router and only a DSL ISP connection?
View 3 Replies
View Related
Jun 21, 2010
Having some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
View 1 Replies
View Related
Aug 30, 2010
We currently have a SUSE Apache2 reverse proxy server setup to reverse proxy (proxy_mod) our GroupWise Web Access server. Our SUSE box is located at www.domain.com. Our GroupWise Web Access server is located internally and is called GWMail. We are in the process of migrating from Novell to Windows, so we will have an exchange server with OWA access running on a Windows Server 2008 IIS7 box. That one will be called EXMail internally. Right now when someone goes to www.domain.com/gw/webacc it goes to the GWMail internal server from the outside world. This was all set up by previous techs who used Linux more.
We would like to set up reverse proxy to be able to reverse proxy to the Exchange Server from the outside world. Unfortunately the snag we are running into is that Exchange needs to run on port 443, and forwarding to port 443 has been a little tricky. I've read elsewhere we need to implement a generic TCP proxy, such as IPtables. what we need to do to get our SUSU Apache2 server to be able to reverse proxy to our Exchange server on port 443. For the save of argument lets call our SUSE server ExtranetServer. Below is our default-configuration.conf file's configuration:
[Code]....
View 12 Replies
View Related
