My Yum server gives error message while installing packages like rpmts_HdrformFdno: Header V3 DSA Signature: NOKEY, KEY, Key ID 37017186" Samba-3.0.33-3.7.el5.i386 rpm is not install.
But I can install other package like bind dhcpd etc.
The problem is that I have set up a test installation with DHCP server and DNS server on Fedora 14 and want to set up dynamic updates from the DHCPD to the NAMED. The problem is that any attempts to make updates of the DNS server fails with a "SERVFAIL" error. I can not even update it through the NSUPDATE tool. This is NAMED.CONF:
Code:
options {
directory "/var/named";
[code]....
Does anyone know where I can find RHEL compatible rpms for Bind 9.7 and DHCPD 4.1?
View 1 Replies View Relatedwhat is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View RelatedI've found a lot of pages of how to fix the issue on older releases of dhcpd and ubuntu.
#>dhcpd
#> ...
#> Can't create PID file /var/run/dhcpd.pid: Permission denied.
I have tried creating the file and giving it permissions to be accessed, but that isn't solving the issue. I tried to go through some of the older fixes, and one was really close to working but lacked the same folders as I have.
EDIT: one solution that worked was to use ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid dhcpd3 -cf /etc/dhcp3/dhcpd.conf at0
I am at first stage of installing dns after installation of redhat 5 am unable to install any package like yum install bin* and yum install cach* and it displays no match for afgument and nothing to do what could be the problem with my redhat installtion and what should i do for this type of problem and explain me how to install bind in dns and dhcp and dc.
View 3 Replies View RelatedHow to install bind 9.7 in centos 5.6 if i installed using yum means, its defaultly installing 9.3 version.
View 2 Replies View RelatedI installed BIND 9.7.3 from source on Centos 5.5, and chrooted it, and I'm getting an error when I run 'service named status' I get a reply, but at the end it says 'named dead but pid file exists'
Here's the entire output:
[root@ns etc]# service named status
version: 9.7.3
number of zones: 23
debug level: 0
xfers running: 0
xfers deferred: 0
soa queries in progress: 0
query logging is OFF
recursive clients: 0/0/1000
tcp clients: 0/100
server is up and running named dead but pid file exists Nothing is logged in /var/log/messages. Named is running and responding correctly. How can I get rid of this error?
How to install step by step to install bind server on RHEL 5.
View 3 Replies View Relatedi have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies View Relatedit appears i haven't quite grasped the meaning of dhcpd.conf despite the numerous tutorials i went through in the internet and the detailed read of dhcpd.conf that i did. what i basically want to put you in perspective, is to have all the pc's in my home network (desktops and laptops) regardless of any other settings, to send their computer name (hstname basically) to the dhcpd (during the handshake)... then the dhcpd will use that name as the hostname and append the known domain name, thus creating an entry (an A record and a PTR record) in BIND....
so say a laptop comes into wifi range of the domain "myhome.org."... i take it that during handshake, the laptop will send its hostname (i don't know what that will be for winXP and win7 dhcp clients, but i presume it will send the output of command 'hostname' for linux clients - or at least thats what i would like it to send....).say "nass-notebook" Then the server will append "myhome.org." and it will update the DNS with an entry looking like[URL].. corresponding to some ip address.
[Code]...
I am trying to provide dynamic IP addresses for devices that are on a different VLAN (101). The server is currently providing 172.17.x.x/16 range for its own VLAN (417). My server is RHEL4 and DHCPD is version 3.0.1. The core switch (Cisco 3750) is configured with ip-helper on VLAN 101 interfacce. Here is my dhcpd.conf file:
authoritative;
ddns-update-style ad-hoc;
omapi-port 7911;
shared-network eth1
[code].....
However my laptop on the VLAN 101 keeps getting IP of 172.17.x.x/16 range..
I have a RHEL 5 64bits installed on a virtual server. I set up a a dhcpd server for one subnet last week and I have a strange behavior : the IPs are provided in a decreasing order. What's the? So I have tried to exchange range values but the result remains the same.
Package version installed :
yum info dhcp
Installed Packages
Name : dhcp
Arch : x86_64
Epoch : 12
Version : 3.0.5
Release : 23.el5_6.4
Size : 2.2 M
Repo : installed
Summary : DHCP (Dynamic Host Configuration Protocol) server and relay agent
License : distributable
Here's the dhcpd.conf :
ddns-update-style none;
#autorisation du pxe
allow bootp;
allow booting;
authoritative;
log-facility local7; .....
I have setup a dhcpd server on my lan with the following option to reflect the static route to my private LAN.
dhcpd.conf
Code:
option static-routes 10.0.0.0 192.16.5.0
I've tested it on OpenSUSE, ArchLinux and even Windows dhcp clients and they've managed to pull the static route configuration. However, to my suprise on my ubuntu machines this doesn't seem to load. Is there anything that needs to be done on the client's side to get this to work?
While configuring dhcpd.conf on centos 4 I couldn't find option to reserve that ip addresses. I have subnet of 10.0.0.0 network of which i want reserve 1 - 50 addresses for my servers. I'll assign static ips to my servers & printers.
[Code]...
Ive searched forums and read syslog dhcpd man pages, but cannot figure out how to completely disable dhcpd logging :S
View 6 Replies View RelatedIs there any way to associate a group to subnet in dhcpd.conf? I want hosts in a specific group to be locked to an IP range defined in subnet. Something like this:
Code:
authoritative;
ddns-update-style ad-hoc;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.1 192.168.0.100;
option blah1;
[Code]...
I've a question about how work dhcpd. I'm on CentOS 5.6. I has a dhcpd server on it. His configuration:
authoritative;
ddns-update-style none;
deny declines;
deny bootp;
option domain-name "mydomain.domain";
option domain-name-servers IP;
option routers IP;
option time-offset -18000;
#option ntp-servers IP;
subnet IP netmask MASK {
range IP START IP END ;
default-lease-time 86400;
max-lease-time 172800; }
And now in the /var/lib/dhcpd/dhcpd.lease file, there few entrie for the same IP. Sometime I've ten same entries for the same IP. Can I have only one entrie by IP? Is there any problems in my configuration of my dhcpd.conf file?
I am trying to install dhcpd on my Fedora 13 VM. I'm using VirtualBox and I installed using the i686 image. I did yum update and everything was fine. When I do yum install dhcpd , I get the following error.
Quote:
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package dhcpd available.
Nothing to do
I am trying to install dhcpd on my Fedora 13 VM. I'm using VirtualBox and I installed using the i686 image. I did yum update and everything was fine. When I do yum install dhcpd , I get the following error.
Quote:
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package dhcpd available.
Nothing to do
I also tried yum clean to clear cache but that didn't help either. I installed Fedora 12 in a different VM and tried but with no luck. Also tried installing using i386 DVD but same error. I should also mention that what I'm trying to do is that I'm trying to set up a relay agent on my Fedora gateway.
I've been using dhcpd for address assignments to PCs for a very long time with no issues. I recently upgraded from lenny to squeeze and now dhcpd seems to have new behavior which I can't seem to change. Here's what I want to do. First, I have a simple situation and don't want to get involved with dynamic DNS updates. I have host statements for each of my PCs and a range statement for cases where I install a new device and don't yet have a host statement for it. Previously, I could discover the ethernet address for the new device from the dhcpd log and add a host statement with an address of my choosing for the new device.
I'd then restart dhcpd and do something like reboot the device or issue an ipconfig /renew statement on the new PC. What would happen is that the old dynamically assigned IP address would be NAKed and the device would do a DHCPDISCOVER, etc. and get the new IP address I specified in the dhcpd.conf host statement. In squeeze, this no longer works. The client asks for the old address it got dynamically and the server just says yes. I can't seem to find a way to get it to NAK the dynamic address and use the new address I've specified in the host statement. I'd appreciate any enlightenment on how this is now supposed to be done. Here's my simplified dhcpd.conf file:
authoritative;
log-facility daemon;
ddns-update-style none;
[code]....
Note that the address here was assigned based on a previous range statement and isn't consistent with the above config file.
I have a dhcpd server running CentOS and Webmin. I noticed in my lists of expired leases some of the lease times are only a few hours even thought I have lease length set to 1 week. I want to keep a lease for a week even if the device requests that it be expired. Is there some way I can do this in dhcpd? I am attaching a screenshot of some of my lease times listed in Webmin.
View 4 Replies View Relatedthis should be trivial for all you big sysadmin guys My box is a firewall/gateway. ETH0 is on the Internet-side, and is fully auto-configured (DHCP client) from my ISP. ETH1 is on the LAN-side, has DHCPD enabled, and I route the traffic to/from the Internet via iptables (NATting, of course). Everything works pretty good, except for the DNS-server assignment via DHCP: how can I configure dhcpd.conf to assign the SAME dns-server I receive from my provider on ETH0 to all my PC on ETH1?
View 8 Replies View RelatedI would like to make my Fedora 13 box a DHCP server for my network. I can not find dhcpd in YUM. Is there a way to make my Fedora box a dhcp server? This was relay easy with Suse, but my Opensuse box just suffered a hard drive failure.
View 1 Replies View Related# /etc/init.d/dhcpd.conf -bash: /etc/init.d/dhcpd.conf: No such file or directory what is the problem? and how to configure out "joe"
View 5 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies View RelatedI have a BIND server that I'm setting up with different views. There is another server out on the public Internet that currently handles all inquiries for this domain. I had installed the Yum packages, chroot, etc. and edited the config files by hand. When that didn't work, I erased the server and started over using Webmin to build everything for me. Same result. I want to setup and verify everything is working on this new server before I take it into production.This is in /var/log/messagesQuote:
Jun 13 21:33:20 dns1 named[13838]: starting BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2 -u named
Jun 13 21:33:20 dns1 named[13838]: adjusted limit on open files from 1024 to 1048576
[code]...
I need to know how to configure the address of the next level DNS server in my BIND server. im in a FEDORA 10 system.
View 3 Replies View RelatedI want to join standalone windows xp machine to Linux Domain (Redhat 9)..
View 3 Replies View Related