Server :: Resizing An ISCSI Device
Jul 19, 2010
I'm trying to increase the size of an iSCSI device. On the LUN side, the provision size has been expanded already. I expanded the size of this device from 15GB to 30GB.
I then rescanned the devices:
[root@ps-dev-nfs ~]# iscsiadm -m node --targetname iqn.2001-05.com.equallogic:0-8a0906-db7938c02-c6a994bda8a4a773-ps-dev-nfs -R
Rescanning session [sid: 1, target: iqn.2001-05.com.equallogic:0-8a0906-db7938c02-c6a994bda8a4a773-ps-dev-nfs, portal: 10.3.2.10,3260]
[Code].....
View 2 Replies
ADVERTISEMENT
Jul 9, 2010
I am running RHEL5.5 its a fresh install and we are testing Xen Virtualization. We are wanting to use our iSCSI SAN for the VMs. I have created the initiator iqn, and discovered the target address. We are connected to the target, but there is no new block device in /dev.
[root@xxxxxxxx etc]# netstat -a | grep iscsi
tcp 0 0 *:iscsi-target *:* LISTEN
tcp 0 0 xxxxx-netapp.okc-:44840 xxxxxx-iscs:iscsi-target ESTABLISHED
tcp 0 0 *:iscsi-target *:* LISTEN
[Code].....
View 2 Replies
View Related
Aug 17, 2010
I'm running 10.04 64-bit diskless on ESXi, installed as a minimal virtual machine. I want this server to access an iSCSI drive. The machine can view the iSCSI shares with iscsiadm, and can even log into the drive. When I do an iSCSI login, this appears in /var/log/messages:
Aug 17 11:08:21 ubuntutest kernel: [1123295.329972] scsi4 : iSCSI Initiator over TCP/IP
So, it appears that open-iSCSI is working correctly. But no new /dev/sd* nodes appear, and nothing new appears in /dev/disk/by-path. I'd expect to see /dev/disk/by-path/ip-XXXXXXXXX. fdisk -l shows nothing but the boot drive. My guess is that the "minimal kernel" doesn't include some necessary module or driver.
View 1 Replies
View Related
Nov 15, 2010
I have a server wich is connected to an iSCSI storage and gets harddisks from this storage. Sometimes I have to add new disks to this server. Everytime I add a disk and make an /etc/init.d/iscsi restart on the server the disks don't have the same device name as before the iscsi restart.
It should be possible to gave the disks persistent names using udev rules. Now I tried to create different rules in "/etc/udev/rules.d/99-static-iscsi-names.rules" e.g.
# /dev/sdc
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -s %p",RESULT=="360a98000503355344c4a576864467877" NAME=="sdc%n"
In "/etc/rc.local" I added "/sbin/start_udev" and in "/etc/scsi_id.config" I added the line "vendor="NETAPP",model="LUN",options=-g"
[Code]...
View 3 Replies
View Related
Jun 24, 2010
I have never done this before but stood up a new Debian (testing) x64 system. It only has 146GB available for RAID1 so I created a 500GB iSCSI LUN on my NAS device on the network and am really confused how I can attach my Debian to the iSCSI LUN I created. Right now the OS is installed all locally on the machine but I would like the iSCSI LUN to be the /home directory for mail storage. Is this possible or do I need to mount the LUN to a newly created folder / mount point that is locally attached?
View 1 Replies
View Related
Oct 28, 2010
maybe this is something extremely simple and my brains are just mush after a whole night of struggling (and succeeding) with wifi driver issues.i'm running a brand new 10.10 netbook on a brand new asus eee 1015. i am trying to set up my email in evolution and the evolution windows are larger than the netbook screen, which means that the OK, SAVE, etc buttons are outside reach. i tried to resize, move window - resizing doesn't work and it only moves horisontally, not vertically.
View 9 Replies
View Related
Jul 7, 2011
I am interested in turning my home server into something that I can store backups on. I do photography and therefore have a lot of photos. I use Mac OS X for my photo editing, so it must be accessible from my Macbook. I am new when it comes network storage servers, so what would be the best solution for me to be able to backup my photos seamlessly? I would like it easy enough so others can backup files without any terminal commands and such. What would you suggest? CIFS? RAID? iSCSI?
View 3 Replies
View Related
Sep 3, 2009
I built a CentOS 5 Linux cluster with GFS storage using local RAID volume and share it with gnbd_export/import on two web-servers. Now I need to expand that storage to another servers local volume. I saw the picture in the manual, but I don`t know, how can I create that scheme.
I can use gnbd_export on the second server and gnbd_import on the first. In that case I will have two volumes on the first storage and I can expand volume group, logical volume, etc on it.
View 1 Replies
View Related
Mar 9, 2010
What is the correct way to allow two servers to use the same file system on a SAN using iSCSI?Is it GFS on the two servers?
View 3 Replies
View Related
Feb 1, 2011
I'm trying to make a fresh install of Ubuntu 10.10 Server 64bit but is stuck with the Partitioning Disk part and Ubuntu 10.04 LTS provides the same error. The installation wizard gives me a menu:
!! Partitioning disks
This menu allows you to configure iSCSI volumes
iSCSI configuration actions
[code].....
View 1 Replies
View Related
Sep 28, 2010
I am trying to connect the one of server RHEL5.4 to the IBM iSCSI storage. Server is equipped with 2 single port Qlogic iSCSI HBA(TOE). RHEL detected the HBA and installed driver itself (qla3XXX). I have configured the HBA ip address in the range of iSCSI host port of storage. Both of the HBA is connecting to the two different controller of storage. I have discovered the storage using command iscsiadm -m discovery command for both of the controller and it went through fine. But problem is whenever server is restarting if both of the hba is connected to the storage then server will not detect the volumes which is mapped to the server and then to detect the volume I need to run "mppBusRescan" and "vgscan" command each time. If only one path is connected it is fine.
View 1 Replies
View Related
May 22, 2009
I have a fairly simple iSCSI setup using two devices, but they have swapped names on different machines. running CentOs 5.3 ia64, and using iscsi-initiator-utils-6.2.0.868-0.18.el5
vm1:
[root@vm1 ~]# fdisk -l
Disk /dev/xvda: 4194 MB, 4194304000 bytes
255 heads, 63 sectors/track, 509 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
Any way to get iSCSI to mount the devices as consistent device names ?
View 5 Replies
View Related
Sep 22, 2011
We have a Centos 5.6 server mounting two iSCSI volumes from an HP P2000 storage array. Multipathd is also running, and this has been working well for the few months we have been using it. The two volumes presented to the server were created in LVM, and worked without problem.We had a requirement to reboot the server, and now the iSCSI volumes will no longer mount. From what I can tell, the iSCSI connection is working ok, as I can see the correct sessions, and if I run 'fdisk -l' I can see the iSCSI block devices, but the O/S isn't seeing the filesystems. Any LVM command does not show the volumes at all, and 'vgchange -a y' only lists the local boot volume, not the iSCSI volumes. My concern is that, the output of 'fdisk -l' says 'Disk /dev/xxx doesn't contain a valid partition table' for all the iSCSI devices. Research shows that performing the vgchange -a y command should automatically mount any VG's that aren't showing, but it doesn't work.
There's a lot of data on these iSCSI volumes, and I'm no LVM expert. I've read that some have had problems where LVM starts before iSCSI and things get a bit messed up, but I don't know if this is the case here (I can't tell), but if there's a way of switching this round that might help, I'm prepared to give it a go.There was absolutely no indication there were any problems with these volumes, so corruption is highly unlikely.
View 3 Replies
View Related
May 14, 2010
iSCSI Server, can I change the default port 3260 to other port ?
View 1 Replies
View Related
Oct 8, 2010
I am having problems resizing my partition. Basically I have a vmware server running 4 OS's and I have already changed the HDD size to 40GB in the profile configuration of the virtual machine. Now I want to edit the main partition to extend from 15GB to 40GB. I have searched everywhere but unfortunately none of it seems to work for me. This is what I have at the moment. (Booted from PMagic Disk) [URL]
View 4 Replies
View Related
Nov 3, 2010
I'm trying to resize an NTFS partition on an IBM MT7977 Server. It has a Adaptec AIC-9580W RAID controller. I was thinking about doing it with a gparted LiveCD/LiveUSB, but then I realised that they won't have drivers for the RAID controller. A quick google for "9580W Linux" doesn't return anything promising.
View 3 Replies
View Related
Sep 17, 2009
Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies
View Related
Feb 11, 2010
I seem to get logged into the NetApp filer fine - it shows the session, but I don't get a device. And don't panic - the system is CentOS 5.4, but the system is named OpenVMS (don't ask . . . ) iscsiadm shows me logged into the NetApp and the session is up.
[Code]....
View 2 Replies
View Related
Aug 2, 2011
Setup1: Two rack mounted servers with a common storage device serving as the home directories for users on the servers. The storage device is a gfs partition mounted on the servers as the home directory using SAS cables. These servers have RHEL 5.4 as the installed operating system.
Setup2: A standard tower server with Debian 6 as the operating system used for tape backups. This has a tape drive connected to it.
Question: How to mount the storage device of setup1 using NFS on the server in setup2.
View 1 Replies
View Related
Feb 21, 2011
I have an iSCSI target on my Ubuntu 10.04 LTS server that is giving me access to 3 x 2TB volumes. I am using LVM to create 1 big volume and using it as a place for my backup software to write to. Upon initial setup I tested to see if the connection would still be there after a reboot, and it was. After going through the trouble of configuring my backup software (ZManda) and doing a few very large backups I had to reboot my SAN (OpenFiler) for hardware reasons. I took my server down while performing the maintenance and brought it back up only after the SAN work was done. Now, the LVM volume is listed as "not found" when booting.
Using iscsiadm I can see the target but LVM doesn't know of any volumes that exist using those targets. I need to get it back up and running and then troubleshoot the reboot issue.
View 2 Replies
View Related
Jan 28, 2010
iscsi-client OS: SLES10SP3i586I configured this sles10sp3 box an iscsi-client via YaST (yast2 iscsi-client), but 'lsscsi' or 'fdisk -l' doesnt show any iscsi-disk
# rcopen-iscsi restart
Closing all iSCSI connections: Logging out of session [sid: 1, target: iqn.2010-03.com.ibm:sn.135026430, portal: 192.168.0.1,3260]
[code]....
View 1 Replies
View Related
Mar 10, 2010
I've been trying to figure out how to set up a partition on my CentOS serve r as an iscsi target, so I can access it from another CentOS client.I've been reading the manuals and various pages on the web, and nothing is very clear. I just want to be able to create a partition on my server, define it as a target, and then have my client initiator mount it.
View 2 Replies
View Related
Feb 18, 2010
want to create a iSCSI connection which mounts /home directory to a share on my NAS via iSCSI. Does anyone know if this is possible on a RHEL 5.4 machine? I am building the server from scratch and then creating the iSCSI mount point in /etc/fstab. After the /home directory is mounted on the mail server, I will copy all the mailboxes over to the /home directory via iSCSI.
View 4 Replies
View Related
Jan 12, 2010
i have installed centOS5. i want to configure iscsitarget. i know that iscsi target is built-in in centOS5. how can i use iscsiadm utility to configure iscsi target. please describe in detailed.
1.) i want to make 4 drives (4Drives OR 4LUNs)in iscsi target each with 5GB space.
2.) please describe and highlight where we mention disk space(5GB)
View 1 Replies
View Related
Nov 15, 2010
I have an iSCSI device that is large, ~17TB usable, and I've created an XFS file system at the device level. I mount the device no problem and am able to touch and remove files without issue. I start my application and within about 5-10 minutes I start seeing the following entries appear in /var/log/messages
[Code]...
View 2 Replies
View Related
Mar 16, 2016
I have just set up a high available San with 2 nodes which run on debian 7.
Replication and high disponibility works fine but i have some problem with iscsi.
I have create on 2 windows server 2012 1 iscsi iniator on each, my problem is when i create a file or a directory on one server, I have to put the hard drive offline then online and the change appear but it's not really useful.
So i would like to know if there is a way to automatically do this.
View 0 Replies
View Related
Mar 3, 2010
I want to install iscsi-target package in opensuse 11.1.
Step 1:
linux-7bvl:~ # zypper search iscsitarget
Loading repository data...
[code]....
View 2 Replies
View Related
Oct 19, 2010
I am currently wanting to connect to an NAS unit that I have. I have installed open-iSCSI and have made the following changes to the iscsi_conf file:
Quote:
# To set a CHAP username and password for initiator
# authentication by the target(s), uncomment the following lines:
node.session.auth.username = "user"
node.session.auth.password = "12 digit pass"
[Code].....
My goal is to get the iSCSI initiator to connect after a reboot. Mounting after connecting I am sure this will be another challenge.
View 1 Replies
View Related
Nov 8, 2010
connecting to my QNAP iSCSI target from Ubuntu (10.04). I've followed the instructions in the QNAP manual, but I something goes wrong when I need to list the nodes. When I enter
[Code]....
View 1 Replies
View Related
Dec 24, 2010
On windows I installed the iscsi initiator which tells me my pc id. Then I take that id and put it in my storage which automatically gives me my extra disk. How can I find out the id assigned to my ubuntu pc?
View 1 Replies
View Related
