Server :: Permissions Error With NFS ?
Jan 2, 2010
I am having a bit of an issue with a NFS configuration. Initially I had no issues when both the server and client were both running Ubuntu Karmic. The client is now running Fedora Core 12 and when I mount the share I get "You do not have the permissions necessary to view the contents of Mnt". I came across this troubleshooting guide and it suggests that the issue may be the UIDs are not in sync on the server and client. If this is the issue, which usernames do I need to sync and how would I do that?
View 2 Replies
ADVERTISEMENT
May 20, 2011
I'm getting the error described in this bug. The fix is described in the bug:Code:The following additional SELinux permissions were found to resolve the situation:
samba_domtrans_winbind_helper(httpd_t)
allow httpd_t winbind_helper_t:process signal;
apache_append_log(winbind_helper_t)
[code].....
View 2 Replies
View Related
Nov 9, 2010
i want to know what is use or benefit of using s and t permission?i have used them but could not understand its uses.please explain me with suitable example.Also tell me about umask command to flag on s and t.
View 1 Replies
View Related
Feb 19, 2011
I am trying to run ucertify under wine, but when I try to run I receive the error: unable to create copy of userdatatemplate.ucp to userdata.ucp. make sure you have enough permission to create file in C:program filesucertifyprepengine to create a new file.
I believe I have provided full access to the ".wine>dosdevices>c" so I don't know if I'm missing something obvious?
Has anybody faced this error and overcome it?
View 1 Replies
View Related
Jun 8, 2010
I have three partitions. One for each: Windows, Debian and my files. I wanted a partition available in all systems, so I created FAT32 and mounted it as /data and drive D. In linux I created symlinks in my /home folder to /data/documents/xxx/xxx. I wanted to save my projects on that partition, but in every IDE I tried I get the permission denied error.
Screenshot
What should I do to make /data writable for IDEs? As normal user I have full access to it.
View 9 Replies
View Related
Nov 12, 2010
this costed me a whole day of trying and retrying. I set up a small home server with apache, php, and mysql.
System infos:
Linux 2.6.31-22-generic-pae
Ubuntu 9.10 Karmic Server edition
Apache/2.2.12 (Ubuntu)
Until now, it served happily a couple of sites, with no problems. But now, I wanted to set up my ftp server to point to the same directory as one of the sites, for me to be able to upload and manage files via ftp. As a server I normally use proftpd. With my usual config, proftpd runs with its own user and simulates the user ftpuser:ftpgroup when creating files. So I just changed all the files to be owned by this user and group. Permissions set to 770.
Everything works fine, and I'm able to access the data via ftp. BUT, when I try to browse my site the usual way (i.e. point firefox to its address) a 403 forbidden error is issued. Of course, you will say: you didn't allow access to apache. Well, I remembered that right away, and added the user www-data to the ftpgroup user. Now I espect apache to be able to read and serve the files.
Still same problem. 403. The apache error log is full with "permission denied" errors. After many attempts, I logged in as the user www-data, and tested access to the files. This way I'm able to cd into the directory, and read-write the files with nano. As a test, I tryed the other way around. Setting www-data:www-data as the owner of the files, and adding the ftpuser to the www-data group. This way apache works, but proftpd does not. Most probably it has something to do with a misunderstanding of groups permissions or the way this two deamons access the files.
View 9 Replies
View Related
Jul 27, 2011
My Torrents will not start due to a "Permissions denied" error.The folders with the files being download have it set 777, so I'm thinking it's something else.When I look at the auth log, It does appear that it is that folder causing the issue.I can keep guessing the cause of permissions, but I do not know how to trace the problem.
View 1 Replies
View Related
Aug 13, 2011
I have installed PostgreSQL 9.0 in Ubuntu 11.04.The following is a bit long-winded and cross-relates to PostgreSQL,I ran the PostgreSQL installation thus:
Code:
sudo su
./postgresql-9.0.4-1-linux.bin[code]....
The problem, obviously, is the "Permission denied" error. What/where am I going wrong? From my directory listing I can see that the permissions for gjd_sentinel_data are drwxrwxrwx with owner/group of postgres. On that basis I can't see why there is the problem.I am wondering if it has something to do with the psql process running as, or owned by, user postgres? Or that I am running as the wrong user? Or something else beyond my experience?
---
Ubuntu 11.04 with GNOME2 classic desktop
Single user.
Dual boot with Windows XP Home
View 1 Replies
View Related
Jan 15, 2010
I installed Sun's virtual box 3.1 under Ubuntu 9.04. It worked flawlessly. I upgraded to to 9.10 and know I get a kernel error. rc=-1908 Now I cannot get Windows to load.
View 2 Replies
View Related
Aug 7, 2011
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
View 6 Replies
View Related
Mar 17, 2010
tl;dr - sudo make -> operation not permitted, sudo chown -R 777
* -> operation not permitted on some of the files
I am trying to install a library. Sudo make is getting permission denied on file 1, while using regular make I am getting permission denied on file 2. I have noticed some of the directories in the library are under nobody:nogroup. I tried chown and sudo chown, both didn't work. Sudo chown got permission errors, while chown didn't change ALL the files. (operation not permitted once again) Tried sudo su, and working from there, that also did not work. (permission once again). Using lsattr returned "lsattr: Inappropriate ioctl for device While reading flags on".
Code:
sudo chmod -R 777 *
chmod: changing permissions of `Makefile': Operation not permitted
chmod: changing permissions of `Makefile.am': Operation not permitted
chmod: changing permissions of `Makefile.in': Operation not permitted
chmod: changing permissions of `queue.c': Operation not permitted
chmod: changing permissions of `queue.h': Operation not permitted
chmod: changing permissions of `ucutil.h': Operation not permitted
Note the .libs folder not having write permission....
Code:
chmod -R 777 *
constantin@Nadfadfo:~/network_home/constantin/libraries/unicap/libunicap-0.9.8/common$ ls -la
total 68
drwxrwxrwx 4 constantin constantin 4096 2010-03-17 11:31 .
drwxrwxrwx 8 constantin constantin 4096 2010-03-17 11:31 ..
drwxrwxrwx 2 constantin constantin 4096 2010-03-17 11:31 .deps
drwxr-xr-x 2 nobody nogroup 4096 2010-03-17 11:31 .libs
-rwxrwxrwx 1 constantin constantin 15295 2010-03-17 11:31 Makefile
-rwxrwxrwx 1 constantin constantin 130 2010-01-17 08:17 Makefile.am
-rwxrwxrwx 1 constantin constantin 15262 2010-01-17 08:17 Makefile.in
-rwxrwxrwx 1 constantin constantin 6101 2010-01-17 02:49 queue.c
-rwxrwxrwx 1 constantin constantin 1667 2010-01-17 02:49 queue.h
-rwxrwxrwx 1 constantin constantin 125 2010-01-17 02:49 ucutil.h
System: Karmic Koala 64-bit
View 1 Replies
View Related
Jul 9, 2010
I recently Installed Matlab and it keeps giving me this permission error, even after running the following command.
sudo chown -R ${USER}:${USER} ~/.matlab
Cannot write to preference file "matlab.prf" in "/home/"username"/.matlab/R2010a".
Check file permissions.
Cannot write to preference file "matlab.prf" in "/home/"username"/.matlab/R2010a".
Check file permissions.
The desktop configuration was not saved successfully
View 1 Replies
View Related
Oct 30, 2010
I'm on Ubuntu 10.10. I installed Samba and went Administration > Samba. Added a folder [Videos] to share (this folder is on an ext partition). I then went to the folder [Videos] Right+Click > Sharing Options. I selected 'Share this folder', I put in a name and comment, checked Allow others to create and delete files in this folder and checked Guest Access.
When I view this shared folder [Videos] from my Windows PC I can access it with no problems but when I try drill down into sub folders I get a permissions error. [Attached a screenshot of the error]. If I share each folder separately then I can access them but obviously I'd like to share a folder and all it's contents.
View 9 Replies
View Related
Oct 10, 2010
I mount a partition to a directory and ls -liah tells me that everyone has read/write/execute permissions on the whole thing, but I try to save a file into the partition and I get an access denied error. First of all this doesn't make sense because ls is telling me I do have access.
Then it gets weirder. I run sudo chown -R me:me directory. The command exits without error, but then when I go and look at the directory again with ls, it still shows up as owned by root and I still have the same problem. This is particularly strange because I am still able to change permissions normally in the operating system filesystem. It just won't work on the mounted partition.
View 1 Replies
View Related
Nov 22, 2010
I'm still getting my head around setting things up on my web server, I've configured php to run off of Fast CGI, rather than mod_php, due to better memory consumption. I've managed to get my virtual hosts configured to work with fastcgi, ensuring the following options are set:
AddHandler fcgid-script .php
FCGIWrapper /usr/lib/cgi-bin/php5 .php
Options +ExecCGI FollowSymLinks
I tried adding those settings to /etc/phpmyadmin/apache.conf, but this doesn't seem to work. Whenever I go to www.mydomain.com/phpmyadmin , I just get a 403 Forbidden Error. This used to work no problems on mod_php.
[URL].. because the alias is set so that my virtual hosts can access it through /phpmyadmin. There is probably something basic I am missing here.
View 1 Replies
View Related
May 3, 2011
I had to register with a new username, because I could not remember my logon details and have since changed ISP so could not get details sent, anyway that aside to the problem.
I upgraded to 11.04 and all went well (hence posting here and not in the Upgrade section) and it is running fine, well until yesterday.
I ran the update manager as I usually do when first entering Ubuntu and it did an update but then gave me an error message about file permissions and to check my connection (which was connected OK).It has also affected the Software Installer, and now I can not install any new software.
Is this a generic problem with the latest update or is it just my Dell Inspiron 1545 please?
View 1 Replies
View Related
Aug 1, 2010
I have a FTP server (vsftpd), and would like to setup different file permissions for different groups:
-"ftpusers" group should only be able to browse and download.
-"ftpadmins" group should be able to browse, download, AND WRITE (RNFR, RNTO, MKDIR....).
Let's say my main directory is /var/ftp/docs/. It should be accessible by "ftpusers" group, but only writeable by "ftpadmins" group. Other groups or users may not access it. Which permissions and ownership should I give? My problem is that the dir can't be owned by two groups...
View 2 Replies
View Related
Apr 8, 2010
I have an NFS server on Windose Server 2003. I use it to back my Linux/Solaris databases up to. I mounted the NFS share on the Linux box. I was testing the permissions to it, and accidentally did a chown sybase:sybase /OLBackupOLBackup is the root directory of the NFS share. When I did the chown command, it changed the permissions on the share. Now it seems that linux is controlling the permissions. In windose I cant add users/groups. How can I remove Linux from owning the permissions. Im not sure if this is a windose issue or a linux issue, but figured I would start asking here first.
View 1 Replies
View Related
Oct 4, 2010
I'm planning a NFS share for a small enterprise (25 NFS clients). I need to create a directory structure but I'll need to set up differents permissions (rw/ro) to some directories of the tree. I wonder if it's possible to grant access using groups IDs, so that would be ideal for this application. Is it possible? I was thinking that I would kneed some kind of centralized user info, such as NIS or LDAP. Is that necessary?
View 4 Replies
View Related
Jun 20, 2011
I'm setting up some CGI scripts to be executed by Apache. What I find disturbing is the fact that since the owner of the CGI script is the Apache user, it is not possible for me working under my user to edit the script unless I either edit it with sudo or chmod it to 777, which I believe is not advisable.
View 3 Replies
View Related
Apr 8, 2010
i am trying to set permissions on my wordpress install such that the wordpress admin can write to the files and directories in the wordpress tree. otherwise i have to do all the things wordpress does automatically by hand with vi.of course i would like to have permissions set as precisely as possible for security.at present the files are set to 644 (-rw-r--r--). my plan is to change permissions to 664 (-rw-rw-r--) using chmod. ie "chmod -r 664 ./wordpress".
View 4 Replies
View Related
May 4, 2010
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
View 2 Replies
View Related
Sep 8, 2010
I've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.
Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG
I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.
View 1 Replies
View Related
Mar 9, 2011
I have question regarding setting permissions on wp-content/uploads... in wordpres. I read a tutorial where they want you to set permissions: chown -R julie.julie uploads/ chmod -R 777 uploads/ 777 makes it rwx for others as well. It's not secure! It works but is temporary fix. How I can make sure that the user julie (wordpress) will be able to write to it but anybody else wont.
View 3 Replies
View Related
Jun 9, 2009
I have just started using linux. I have setup an ubuntu apache2 server. It has been running brilliantly and I am highly impressed with the Linux system. My box is an HTTP server and I am hosting a website on it. I have VSFTPD installed and functioning as my FTP software. It has worked fine so far but I have been a bit annoyed that I have had to set permissions for each file I have put on there.
Now I have run into a serious issue with the permissions being set to 600 and I really need them to 755 because I am running an automatic upload for a webcam and the Image can't be accessed due to the automatic permissions of 600 being set to the image. My extensive windows background tells me that I need to apply the correct permissions to the WWW folder and get the files to inherit these permissions automatically.
View 1 Replies
View Related
May 30, 2010
I am running into a Brick wall with this. And thought that the knowledge and expertise here would be a good place to seek help.I have CentOS 5.4 server running Samba on a WinBloZ network. I have the groups all setup and that aspect works fine. But here lies the issues.In a shared directory with group permissions set if someone on the group with permission to this directory creates a file they are the only person that can edit / modify that file. That file need to be editable by the entire group. But the only way thus far I can achieve this is to manually chmod the files in the directory. I know there is a way to fix this, but I have not found it. Can someone please explain how to make this work for me.
View 1 Replies
View Related
Apr 26, 2010
I have a Samba share set up on a SUSE server that about 30 Windows XP clients are connecting to on a daily basis. They connect using Winbind and their Active Directory usernames and passwords which are stored on a Windows small business server (Server 2003). The share is called "company" and it's right off the root of the partition. Within "company" there are about 75-100 folders, most of which need to be publicly available and publicly writeable. There are a few that need to be locked down to a certain group of people so I've used group membership and access control lists for those.
The permissions on new files/folders still aren't right though, so I'll just try to explain what I WANT rather than trying to resolve what is HAPPENING since I think that'll be easier. Currently the entire company directory and all subdirectories and files are user-owned by "administrator" (an active directory domain admin). I'd like new folders and files created anywhere in that directory or any subdirectory to maintain that ownership by administrator, regardless of who creates them.
Likewise, the entire directory and all subdirectories/files are group-owned by "domain users" (a builtin active directory group which is pulled in via winbind) which gives everyone write access to everything. I'd like that ownership to be maintained as well on any new files or folders created in /company or any subdirectory therein. I think this is working for the most part as I've set the setgid bit on company. I'd like any files or folders created in /company or any subdirectory therein to have 770 permissions (rwxrwx---).
So, what I want is regardless of who creates a file or folder anywhere in "company" - it should be owned by user "administrator" and group "domain users" and have 770 permissions. I'd like to make a little tweak to this post. Above I said I wanted anything created under Company to be created with group owner "domain users" - that actually only goes for anything that will be public. On the folders I have locked down via group membership and ACLs the new files/folders created within should maintain ownership of whatever group owns that directory. I should be able to do this by setting rwxrws--- permissions on secured directories.
View 2 Replies
View Related
Jan 20, 2010
I have a home network setup. The server has OpenSuse 11.1 installed. I have a laptop with Ubuntu 9.04 and my wife has an iMac. My wife an I are both members of the same group and that group has full rwx permissions in the directories we access. All the directories we need belong to that group. We can all connect to the server and access files without a problem. However it seems that all the files are read only for the other user. In other words if I make a directory on the server and save a file in there, I can access it with full permissions and my wife only gets read access and vice versa. What should I be looking out for or checking that would enable both of us to have full permissions other than setting permissions on the directories to the group we share (which I have done)? I also have one other question.... I notice that some users and some of the groups have the same number. I assume that this is normal?
View 1 Replies
View Related
May 27, 2011
I'm setting up an automatic mount point on one of my servers. However, for this file I only want certain people (permissions) to access it once it is mounted. I'm figuring I need to place this either on an ACL (via setfacl) or by configuring this in my mount point config file (auto.misc) . Has anyone done this before, restrict use of an auto mounted directory?
[Code]...
View 3 Replies
View Related
Sep 11, 2010
This is a interesting confusing problem.Ok I have group with 3 users.I have a folder in /home with owner as root, and group that has read/write permissions.However if a user opens up a file and saves it via samba, the owner changes to the user, and the group members only have read permissions on the file.
View 4 Replies
View Related
