I have connected to the VPN server successfully but my IP address still shows up as my normal WAN rather than the server's IP address.hat the push settings I have to configure on the server?Here is my server.conf:Quote:
port 1194
proto tcp
dev tun
[code]....
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
I set up a git repository on the live site of my website using git init. Then I created the same repo on my local machine using git clone command. Then I made a few changes and committed them to on my local repository. Then I tried to use git push origin alongside the ssh path to my repository on the remote machine to update my live website. However, I noticed that git-push only changes the head of my git repository on the remote machine and it doesn't change any file.
In order to update my remote repository I have to issue the following command after I use git-push.
PHP Code:
git reset --hard HEAD
This is a two-step process for committing changes to the live site. I was wondering if it's possible to merge these two steps in one to make life a little bit easier?
Note that, I'm the only one working on this project (sometimes from my laptop, sometimes from my desktop), so I trust all the commits.
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies View Relatedi have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
I'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.
what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
i just one to emulate the windows 2003 - windows XP easy VPN deployment, with my ubuntu server.I got my server side (ubuntu) and client side ( openVPN gui) and everything looks okbut now, i cant make a //server/SHARED and get from my house to the office's docs, despite the conection its ok... whats wrong?
View 14 Replies View RelatedWe're setting up an OpenVPN access server, a quite straight-forward and very customizable system. Only we have a problem, I guess caused by Apache, when we try to reach the client web server via a custom port (see screenshot in attachement) we get the following error: Code: 501 Not Implemented. The requested method is not implemented by this server. Although we have added on the cisco router a port forwarding for port number 9943. It is working when we access the website : port with the local IP address [URL]...
View 2 Replies View RelatedWhat client can I use on a MAC to connect to an openvpn server?
All the client s seem to use password connections whereas the openvpn server uses certificates.
I need to run a 2nd instance of openvpn on my server so that it can run on udp. The current one runs on tcp and I need to keep that running. Apparently, I need to create a 2nd tun network for it to use - how can I do that? I tried starting a 2nd instance of openvpn but it just seems to hang.
View 1 Replies View RelatedI try to establish basic connection between my 2 end systems using openvpn. The problem is when i move the client files to my laptop i cant even ping the server from there. I copy paste the server commands in section 4 [URL] ....
In the client i ran the first command and changing VPNSERVER IP with 10.9.8.1 and LOCALGATEWAY IP with 192.168.1.1
which i thought that whats the server use : ROUTE_GATEWAY 192.168.1.1/255.255.255.0 in the server initialization process
The second command produce error device tun0 not found and when i create one using openvpn --mktun --dev tun
I get RTNETLINK answers : network is unreachable
Note : I use wireless connection in the client system (laptop). The server works good and i could ping him ( from the same machine ) but cant ping him or access the vpn server in my laptop. I also use default openvpn settings...
i recently rent a VPS and installed with CENTOS 5 64bit, i followed a tutorial to install openVPN to bridge traffic to my windows machine.
View 3 Replies View RelatedI am trying to setup an OpenVPN server using CentOS 5. I ahve installed everything, configs are good, server starts fine. I have generated my certificates using the easy-rsa 2.0 included with OpenVPN. I have downloaded all the certificates to my machine and setup my client to connect. I am having that typical problem everyone seems to have where my client says certificate verify failed. However I can use openssl on the server to verify and it is ok. What am I doing wrong here?
Code:
[root@GSFOVPNxxx01 openvpn]# openssl verify -CAfile ca.crt gg-jbloomer.crt
gg-jbloomer.crt: OK
[root@GSFOVPNxxx01 openvpn]#
client output
Code:
2010-12-07 08:44:33 MANAGEMENT: CMD 'hold release'
[Code]...
I just dont get it, I have racked my brain and google until my eyes bleed and can not figure this one out.I am sure it is something simple that I am missing.
I have set up OpenVPN Server on a VM (Ubuntu 10.10) running virtualbox bridged to the host. Everything is working fine excepts the fact that I cant seem to be able to assign internal IP (VPN Server) to client connecting. Let me explain: All my clients are connecting and accessing the internet without any issue. Where I have an issue is that all my clients come out the other way on the internet with my server ip address which kind of defeat the purpose. Is there a way (keeping in mind that I am running the server in a VM) to have all my clients accessing the internet with an IP provided by the VPN Server?
View 4 Replies View RelatedI have (seemingly regretfully) finally upgraded my Fedora Core 7 linux machine that has served me so well for the past decade. One of the final pieces to put in place was my Openvpn config (which was running flawlessly on my FC7) which I cannot get to work.
Here are my steps.
1. Disabled SELinux
2. Added the following entry in my iptables: (although I've stopped iptables to help troubleshoot)
-A INPUT -i tap0 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A FORWARD -i br0 -j ACCEPT
3. Yum installed openvpn and bridge-utils (btw I'm using bridging)
4. Configured my bridge-start script as such:
#!/bin/bash
# Set up Ethernet bridge on Linux
# Requires: bridge-utils
# Define Bridge Interface
br="br0" .....
5. Configured my openvpn server conf as such:
proto tcp-server
port 5990
dev tap0 .....
When I execute my bridge-start script it creates the br0 and tap0 then all connectivity vanishes (I can only ping my gateway 10.0.0.50) - internet and any other addresses time out.
We have installed "openVPN" from openSUSE 11.2 repo and "openVPN - webmin module" (GUI).What it needs to be done .. "Road Warriors" need to be able to access websites through openSUSE box sitting in the data center, from remote locations (hotel, coffe shops, wi-fi hot spots,..)We're half way there but it gets stucked somewhere with the IP's
View 6 Replies View RelatedI had recently setup an OpenVPN server on x64 10.04 via the guide found at: [url]
Everything was working perfectly, all clients were able to connect etc.
Today I needed to reboot for a completely unrelated issue - only to find that upon logging in, openVPN was no longer running.
When I tried to execute 'sudo /etc/init.d/openvpn start' I'm presented with an interesting message...
This *used* to say Server. I've double checked all the configs and scripts used in the config and they all check out OK. I purged and reinstalled openVPN to no avail...
I installed OpenVPN and gadmin-openvpn-server from the repos and I can't seem to activate the openvpn server in the gui. I have the server certificate generated, and all the information on encryption protocols setup, and accounts named and ready, despite accounts that were already there, such as www-data, bind, ossec, etc being listed. The server log states:
PLUGIN_INIT: could not load plugin shared object /usr/lib/openvpn-pam-auth.so: /usr/lib/openvpn/openvpn-pam-auth.so: cannot open shared object file: No such file or directory.
Followed this guide to the letter:[URL]..
Tried to run command:
sudo /etc/init.d/openvpn restart
And just get a fail returned.
This is what the log-file says.
[Code]...
It says init bridge br0 does not exist. Do I need to create it in the network config or something?
When the centos is running a vpn server, there 's a client connecting. The connection can't be seen by netstat -tunp
View 4 Replies View RelatedRunning Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
View 1 Replies View RelatedI am trying to setup a vpn client for my iphone since it doesn't support openvpn. However I keep running into this error message: initial Main Mode message received on <local ip>:500 but no connection has been authorized with policy=PSK.
View 3 Replies View RelatedI have set up my Openvpn Server in Centos and it is working fine. Windows XP clients are able to connect the OpenVPN Server and access the network. This is a customized OpenVPN Gui Client. Now I need the customized OpenVPN Client for MS Windows 7Bit. I am using openvpn-2.1.4-install OpenVPN Client in MS Windows 7 64Bit. This is a executable and working fine in the said architecture. Now I want to compile this version. I am following the given steps at : [URL].. As per the direction i have copied the source from 2.1.4 and tried to compile, but compiled copy is giving the error " An error occurred Installing the TAP-Win32 Device Driver". I have tried this compilation by making every change and hack but all in vain.
I think that there are some certain steps which are missing and not documented any where. And sure that someone in forum will know the facts.
WHEN I START /openvpn /etc/openvpn/server.conf im getting the following error i had installed the configuration by following link [url]
I had pasted i error log below:
Is there a way to prevent users of an OpenVPN service from accessing restricted sites? I know this can be done through a proxy server but through a VPN there seems to be no way of preventing traffic from accessing porn sites or other as the traffic is encrypted. I am using a VPN in the same fashion as a proxy server except that the VPN is necessary because some video sites use rtmp on port 1935, which a proxy server cannot route.
View 7 Replies View RelatedNetworking problem obviously
View 1 Replies View RelatedI've a fully working openvpn network but it works only using ip address.Clients should comunicate each other thought the server. To semplify the managment of clients I'd like to use their hostname instead their ip. there are a way to achieve it?Now openvpn assign ip address to the clients, but if is needed I can install other software on the server, it's a Debian machine.
View 4 Replies View RelatedThis was working and stable on f-10 and f-11. Fresh f-12 install including openvpn, Copied /etc/openvpn/* to new system as root from working f-11 syatem. /etc/init.d/openvpn start (and stop) works as advertised HOWEVER when set to start at boot using chkconfig or Services Configuration program, openvpn does not start. I must manually start it every time. When started, it does work without error messages in the log.
I tried removing the NetworkManager-vpn module with no effect. Thought it could somehow be overriding the auto startup of openvpn at boot.
i have setup Open VPN on Ubuntu 9.04, generated the key and have it running successfully on the server end. I download the open vpn client for windows, copied over the key ca and cert file and connected to the erver. All went well and the open vpn gui said its connected to the server (green comp icon in taskbar) and it said in a ballon it assigned me an ip of 10.8.0.6 it all looks good... BUT i have no vpn access... The virtual adapted in windows is not able to pull an actual IP/gateway and such...
[Code]...