Server :: Clamav Is Not Updated
Apr 1, 2010I don't know why clamav antivirus is not update even if I try using "freshclam". In Terminal, it say up to date. But in ISPConfig 3 Interface, it is not.
View Screenshot
Log:
Code:
ADVERTISEMENT
Ubuntu Installation :: Clamav Installion Of PHP ClamAV Lib - Depend Stopped It
May 31, 2011I am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
Red Hat / Fedora :: ClamAV - Error "message Output: Script: Clamav-cron V. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /"
Mar 19, 2010I have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
Server :: ClamAV Missing Decoder
Mar 26, 2011I have a Debian mail server running Postfix, Amavisd-new, Clamav, & Spamassassin. I noticed when I started all the daemons, the mail.log file had some missing decoders which I assume Clamav can't scrub.Was there a missing package for resolving what's causing this notifications in the logs?
View 3 Replies View RelatedUbuntu :: ClamAV-clamd - Can't Connect To UNIX Socket /var/run/clamav/clamd.ctl
Apr 16, 2010This started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
Ubuntu Servers :: ClamAV Is Outdated - WARNING: Your ClamAV Installation Is OUTDATED
Sep 23, 2010I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
Fedora :: Script For Configuring ClamAV Server?
Dec 17, 2009In short, I've written a bash script (available from github) for configuring and removing instances of clamav-server on Fedora (clamd). It lets you create and remove individual instances with a specific user and port (if you specify them) and will install the required packages if not already present on the system and remove them if you want to. In long, we use Clam AntiVirus as our antivirus protection for Digital Preservation Recorder and talk to it over the default port, 3310 (clamd). Installing the clamav-server package under Fedora however, doesn't actually set up an instance. In fact, it doesn't copy any system configuration files into place at all. This means that the system is left without any working ClamAV server out of the box.
Under Fedora, ClamAV server is configured on a per user basis. This is actually quite important (unless you run as root) because the daemon needs at minimum read access (and we've found also write) on the files/directory being passed for scanning. The instructions on how to configure it are located under /usr/share/doc/clamav-server-[version]/ but I have taken these instructions and written a bash script to configure all of this for you. The script is available from github. It can create or remove an individual instance of clamav-server using a specific username and/or port (if you want to specify them, else it defaults to clamav on port 3310). The script will also install any required packages, if you don't already have them on the system. You also have the option of removing the required packages when you remove an instance. The script now also configures freshclam for you (the definitions updater), which needs to run as your user too.
Server :: Installed Clamav / Spamassassin - Now Have No Email
Jun 23, 2011I have a dedicated server which is running CentOS release 5.5
I'm still learning this as I go, but, frustrated at the amount of spam I was getting, I decided to install the Qmail scanner.
I followed the instructions here, all of which seemed to go well.
[url]
However, now when I try to send mail I am getting the following error:
The mail server responded: qq temporary problem (#4.3.0).
CentOS 5 Server :: ClamAV - Always Get Message In Maillog
Sep 7, 2010when a message gets sent to me I always get this message in my maillog. What does this mean and how can I fix it?
srvspam amavis[2474]: (02474-06) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100907T102651-02474/parts: lstat() failed: Permission denied. ERROR srvspam amavis[2474]: (02474-06) WARN: all primary virus scanners failed, considering backups
CentOS 5 Server :: ERROR: /var/log/clamav/freshclam.log Is Locked By Another Process
Sep 14, 2009Is set up a postfix, dovecot + clamav server as described in the wiki. I also use the freshclam update script in /etc/cron.daily/freshclam. But my problem is i get this error message every day:
/etc/cron.daily/freshclam:
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log). ERROR: /var/log/clamav/freshclam.log is locked by another process
CentOS 5 Server :: ClamAV - All Primary Virus Scanners Failed
Jun 21, 2010I'm having a little trouble with ClamAV. Everytime someone sends me an email I get this error in my Webmin Mail Log. Now the mail works and it goes to the quarantine or to the user mail box but this error fills up my mail log and I'm assuming it is not using ClamAV virus definitions to scan the mail? How would I get rid of this error?
I checked in my /etc/clamd.conf and I have AllowSupplementaryGroups yes. What can be causing this error?
I am using ClamAV 0.96.1
Spamassassin 3.3.12
PostFix 2.3.3
CentOS 5.5
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100621T090618-10714/parts:
lstat() failed: Permission denied. ERROR
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) WARN: all primary virus scanners failed, considering backups
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) SPAM, <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Yes, hits=20.638 tag=6 tag2=7 kill=7
tests=DKIM_ADSP_CUSTOM_MED=0.001, DRUGS_ERECTILE=2.221, FORGED_YAHOO_RCVD=1.022, FREEMAIL_ENVFROM_END_DIGIT=2.223, FREEMAIL_FROM=0.001,
FREEMAIL_REPLYTO=2.775, FREEMAIL_REPLYTO_END_DIGIT=0.98, FSL_HELO_NON_FQDN_1=0.001, HELO_NO_DOMAIN=0.001, INVALID_DATE=0.432, MISSING_MID=0.14,
NML_ADSP_CUSTOM_MED=1.2, RCVD_IN_BRBL_LASTEXT=1.644, RCVD_IN_BSRN=2.5, RCVD_IN_RELAYS_ORDB=3, RDNS_NONE=1.274, TVD_RCVD_SINGLE=1.213,
T_TO_NO_BRKTS_FREEMAIL=0.01, quarantine spam-9665 (maia-spam-quarantine)
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) Blocked SPAM, [212.96.9.34] [212.96.9.34] <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Hits: 20.638, 8508ms
Server :: Amavis With New Clamav 0.96 - Bunch Of Errors Appears 'execute Failed'
Apr 23, 2010After the EOL of 0.94 clamav, I removed it stopped amavisd from having my mail scanned, and installed the new version of clamav 0.96.
But, when I try to start amavisd and send a test mail these bunch of errors appears:
[code]....
I've read some posts that had no reply, someone tried to telnet to 127.0.0.1:3110 "the default port of clamd". I tried that but I got connection refused.
Server :: Upgrade Server With All Updated Packages And Patches?
Jun 27, 2011Currently our Production Server version is Fedora8. I know its very old version, i was newly joined as server admin for this company.. my first task need to Upgrade Server with all updated packages and patches..Without production time down..because we have nearly 400 clients accessing our server.
1. Is it possible to do Without Production loss??
2. before upgrade what are the things i need to do??
3. is there any possibles the working function not working in new upgrade packages??
CentOS 5 Networking :: Check If Clamav Is Scanning HTTP Traffic Squid Proxy Server?
May 21, 2011I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
Server :: Ntpdate - Keep Updated The Time On A Server?
Nov 25, 2010What is the right way to keep updated the time on a server? Using ntpd daemon or ntpdate by crontab? I've two server in two different locations.. I've used
Quote: # ntpdate ntp1.ien.it
on both server, and the two times were staggered by ten minutes. How is it possible?
Software :: Setup A Mail Server - Virtual Users With Postfix - PostfixAdmin - Courier - Mailscanner - ClamAV On CentOS 5.5
Dec 26, 2010I am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-
[Code]....
CentOS 5 Server :: Yum-updated Does Not Do Anything?
Aug 19, 2009I'm new on this forum. I have problem with yum-updated. It is loaded and running
-bash-3.2# ps -ef | grep yum
root 13591 1 0 11:19 pts/0 00:00:00 /usr/bin/python -tt /usr/sbin/yum-updatesd
Server :: Updated The Password Immediately In The Ads?
Dec 24, 2010i am integrated ADS with squid and its working fine. In squid server end i have used "net ads password" to update new password for the user and it successfully updated. Issue is update not doing immediately it takes long time to update the password , even i restarted the smb and winbind services. I want to updated the password immediately in the ads server. is this possible ?
View 3 Replies View RelatedServer :: CentOS 5.3 - Easiest Way To Keep Software Updated?
Mar 17, 2010I have somewhere between 8 and 12 servers, spread amongst different webhosts, all running CentOS 5.3. Everything on the servers has been compiled from source:
> EngineX, PHP, MySQL, Munin, etc
I compile from source because I usually run ./configure to modify the source before installing. What would be the easiest way to keep the server software updated? I am considering creating custom packages from a server which I would keep up to date manually. Then use Capistrano or Puppet to install those packages on all of my servers.
Server :: My /var/log/secure File Is Not Getting Updated With Ssh Logins?
Jul 17, 2010my /var/log/secure file is not getting updated with ssh logins from yesterday.Even the login from my own ip is not updated.
View 2 Replies View RelatedSoftware :: What Actually Gets Updated / When Say Want To Update Rhel5 Server
May 23, 2010what actually gets updated when i say i want to update my rhel5 server?its kernal or anything else.
View 1 Replies View RelatedUbuntu :: Keep Desktop Folder Always Updated With Content Of Server
Jun 1, 2011want to sync 2 folders, one on a desktop and the other on my server. My objective is to keep the desktop folder always updated with the content of the server folder. If I get this working, I can do the same with the rest of my desktop and laptop users. When online they can run a script with rsync and update data. Is it possible to get 2 way sync?
View 3 Replies View RelatedServer :: New Zone Entry In Master Not Getting Updated At Slave
Feb 19, 2011I have configured master and slave Bind servers. Everything works fine. But whenever I add a new zone entry at master server it is not getting updated at slave server in logs I see this error:
client 192.168.1.1#43428: view external: received notify for zone 'yourdomainname.com': not authoritative
At master server I do not see any error or warning message. This error clearly indicates that named.conf file does not have zone entry in it or domain name is wrong. While checking the named.conf file I see that the zone entry has not been updated at slave server. If I update it manually and reload named on slave then zone files (db files) are getting created without any issue and any modification at master server for the zone records are also getting updated. My concern is why zone record is not getting appended at slave server in named.conf file.
Is there anything I am missing in the configuration. I am pasting the steps which I have followed to configure my master and slave server:
Configure Bind as master and slave server
Install Bind on your server
yum install bind
OR
sudu apt-get install bind9
Generate RNDC Key using the command
rndc-confgen -a -k rndc-key
it will stored in /etc/rndc-key file
Master Server IP 192.168.0.1
Slave Server IP 192.168.1.1
Master Server Configuration
options .....
Server :: Deploy Updated .conf Files On Multiple Workstations?
Apr 28, 2011we're about to migrate a set of workstations (ubuntu 10.04 LTS) to a new kerberos/LDAP setup. Basically, this requires the installation of some required deb packages and to copy some new .conf files over the original ones.We made a deb package having these "features":requires the needed other packages as dependenciesbacks up original conf filescopies the new conf files to the right places (i.e. /etc/krb5.conf,/etc/ldap.conf)The problem is: apt-get complains because the deb is "touching" files owned by other packages (kerberos, ldap, etc.). Therefore, the only way to skip this check is either to force apt-get to proceed or using the "replaces" directive in the deb control file, specifying the clashing packages. omething like this:
Code:
Package: <package-name>
Version: 0.9.9
[code]....
CentOS 5 Server :: Updated Fresh 5.3 Xen Kernel And PAE Support Disappeared?
Aug 26, 2009I have installed CentOS 5.3 with Xen on a PowerEdge 2650 machine with 6GB of RAM. As usual, PAE was already enabled so I did not have any problem with utilising all of the memory. However after upgrading to the latest release of the kernel (2.6.18-128.7.1.el5xen), memory available decreased to 4GBs. Then I switched back to the old kernel and 6GB was there. Then finally have switched back to the new kernel and 6GB is again there. So now PAE seems to be enabled but what concerns me is the inconsistent behaviour. (Also I am not sure the reason was the upgraded kernel.)
View 2 Replies View RelatedServer :: Updated Postfix Not Running After Transferring Over Users From Older Postfix?
Feb 25, 2011I recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.
Fedora :: Cannot Update CLAMAV In 11
Aug 30, 2009I have installed CLAMAV in Fedora 11 and when I try to update it says update failed I have tried to find a reason why but unfortunately I am lost. Sony VAIO VGN TXHP1 laptop Fedora 11 Gnome i1568 Wireless connection seems fine.
View 8 Replies View RelatedUbuntu :: Clamav Gui For XFCE
Jun 17, 2011I've Xubuntu and I'm looking for a Clamav Gui for XFCE.
View 1 Replies View RelatedRed Hat / Fedora :: Trying To Upgrade ClamAV - RPM?
May 26, 2010I am trying to upgrade my clam AV to latest 0.9.6.1. Last times I just uploaded to the server and used RPM command and it was installing. Now I cant find RPM for this ver. So I guess I need to prepare one.
I used the guide here:
Packaging software with RPM, Part 1: Building and distributing packages
by IBM
Changing all wget -> clamav
But when run this I got:
# rpmbuild -v -bb --clean clamav.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.74542
+ umask 022
+ cd /home/myclamav/BUILD
+ cd /home/myclamav/BUILD
+ rm -rf clamav-0.96.1
+ /bin/gzip -dc /home/myclamav/SOURCES/clamav-0.96.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd clamav-0.96.1
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ $'
'
: command not found542: line 35:
error: Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
Is there a better way to create RPMs? or Where do I get RPM for this version? I couldn't find it through their site.
Debian :: Clamav 0.96 In Etch
Sep 23, 2010There is a "Debian" way to get clamav 0.96 in Debian Etch 4.0 ?
I put volatile repository in my sources.list, but after upgrade I've:
Quote: