I am having trouble connecting to one of the VM's through ssh from base machine all of a sudden. All I get is an error : ssh_exchange_identification: Connection closed by remote host
Saying that the problem is only with ssh would be wrong as I can't seem to telnet or ftp it either. But I can ping it fine.When I try to login to that VM through console, it won't even let me login. The screen would flash for a sec and the same login prompt would reappear. I am not sure what exactly happened as it was working fine before.
i try to connect to a specific ip address with ssh i have installed the ssh server and client. i also try it by connecting with localhost without any problem. But i keep taking this message if to try to connect to the ip address. i checked my hosts.allow and hosts.deny files and all are commented in there (i think tha this should not be the problem).
We have ubuntu server and bind9 installed and setup.When I issue rndc reload or /etc/init.d/bind9 reload I got this:rndc: connection to remote host closedThis may indicate that* the remote server is using an older version of the command protocol,* this host is not authorized to connect,* the clocks are not syncronized, or* the key is invalid.If I issue named-checkconf /etc/bind/named.conf I got this:/etc/bind/named.conf.local:165: unknown key 'rndc-key'I got the key files in the right location but I'm not sure if we even need to use them.
I am using TomCat6 with Ubuntu Server 9.10 x64. I successfully configured to iptables to redirect the port "443" to "8443" (Tomcat SSL), using this command:
How is it done?Right now its just getting written in a local text file(not /var/../.., not using syslog at all).and every day a new file is being created
Firstly I am new to red5 and not very strong when it comes to linux. I have had installed red5 on my dedicated server and going by the http://myIP:5080/installer demos it is all working fine. My problem is I cannot get it to work with my software being flashchat. I am not sure if it comes from me using the incorrect RTMP url and if so after trying about 20 or more ways of typing it in I always get the same error message "Connection Failed' or "Connection Closed" not to sure what is meant by Closed as to whether it's working but can't get in or what ever. I am after someone who can get this to work for me please and I am willing to pay for that service once it is working.
I have recently installed fedora 14 and configured vpn to access my work network. I need to access some windows machines which although I can ping I cannot remote desktop into. When I go to Applications>Internet> Remote Desktop Viewer and put in the machine name (either just the machine name or the FQDN including the domain name) I get an error "Connection to <machinename> was closed".
I performed a F13 to F14 upgrade today and it went very well. The only problem I'm having is that I can longer Telnet to the machine.The client side returns a "connection closed by foreign host" message or "connection to host lost", depending on the client.The /var/log/messages file contains "FATAL: bad tty" following every telnet attempt.I receive the same error even when trying to telnet to localhost on the local machine.
way to redirect the audit daemon message to a remote host I checked the auditd.conf and it's man page and find that the log location is specified by the line log_file = file_path and in the man page
Quote:
"log_file: This keyword specifies the full path name to the log file where audit records will be stored. It must be a regular file."
does this mean that the auditd does not have the function to redirect the logs to a remote hosts.
I was able to install and start tftp.I can tftp localhost and get a file, even from a non-administrator login.I can connect from a remote host, but the *get* times out.I suspect there is a security issue. Can you tell me how to lower the security on tftp so that a remote host can do gets?
I have local and remote networks that have various printers. I can add any printer (local or remote) to any PC, except for one PC that's refusing to allow remote connection (it used to, but doesn't now!). The problem PC has two printers connected and work OK as a local printer, but both display same problem when attempting to connect from any remote PC via YaST. Using 'Connection Wizard> CUPS Server' connection method requires IP address of remote PC and printer name. But if I correctly select either of the two printers I get an error message:
"PING 192.168.1.149 (192.168.1.149) 56(84) bytes of data. 64 bytes from 192.168.1.149: icmp_seq=1 ttl=64 time=1.12 ms
Both printers are set to 'Accept Print Jobs' and 'Share Printers> Allow remote access' permits all networks to connect. why this PC is requiring the root password?
We recently had a vulnerability scan done on our network and one of the vulnerabilities was that the dns server discloses the remote host name when using hostname.bind.
Is there any way that we can stop this from happening? Our name server is a Fedora 11 machine.
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code: telnet open ftp.microsoft.com 21 I got Code: telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25 Trying 98.137.54.237... telnet: connect to address 98.137.54.237: Connection timed out telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25 Trying 192.168.71.1... telnet: connect to address 192.168.71.1: Connection refused telnet: Unable to connect to remote host: Connection refused
I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
I'm trying to use ssh-keyscan to get some known_host file population going on, but I have a ton of hosts I want to scan, all with multiple aliases in /etc/hosts. Is there a way to use my current /etc/hosts file to do an ssh-keyscan instead of making a special list of hosts that (from what I've read) ssh-keyscan needs?
I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
I'm using Postgresql 8.4.2-2. I'm trying to remote into my server securely. I figure I could do so with ssh. Apparently I figured correctly, as per, [URL] and [URL] I setup the ssh tunnel. ssh -L 5432:serverip:5432 Then I setup pgadmin3 to connect as follows:
An error has occurred: Quote: An error has occurred: Error connecting to the server: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.
I'm not sure what the problem is. I can connect with Code: psql from the cli after connecting to the terminal via ssh. So I know that I'm using the correct password.
I have installed CentOS 5.4 machine named test.example.com (192.168.1.1)File /etc/hosts contains:127.0.0.1 test.example.com test localhost.localdomain localhostI have read that the loopback addres should not be assigned to host name,only to localhost and the host name should be assigned to 192.168.1.1, like this:127.0.0.1 localhost.localdomain localhost192.168.1.1 test.example.com testIs there any reason why it should be one or another way?
I was trying to use Message Queues for sending message from aninserted kernel module to user space. The function sys_msgsnd failedgiving the obvious error -EFAULT.However, I was able to send the message from kernel to user space when I had made the same driver part of kernel (and not inserting it).How is that possible?I am using linux.2.6.19.x (arch=ppc)I now use Netlink socket to communicate from kernel to user, but the aboveproblem seemed strange to me.
