SUSE / Novell :: Changing /tmp From It's Own Partition Back To Root Partition?
Jun 8, 2010
I initially installed SuSe11.2 with /tmp mounted on separate partition on another physical disk( there are two physical disks). Now I want to attach disk with existing SuSe11.2 to another motherboard so I would like that /tmp becomes part of the root partition. Will deleting /tmp mount point in /etc/fstab create automatically new /tmp from root at next startup, or something else has to be done to achieve, that in future, /tmp resides on root partition instead? In this way it would be much easier to move the disk with SuSe11.2 to another motherboard.
I am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
I recently tried a frugal/poor mans install of knoppix that I placed in a folder in the root partition of /home (hda7) in opensuse 11.3. I decided to delete the folder and contents. The hard drive was busy for several minutes and after it was finished, I checked the disk usage and found that / was at 97% capacity, up from what was 10gig of free space. I could not find any traces of the deleted folder or its contents, so I used puppy linux and ran e2fsck on the / partition. Puppy linux reported 1.9gig free space and opensuse reported .5gig free space. My concern is if the deleted folder is taking up space in the root partition that I can not locate and why the difference in reported disk space usage in hda7. Also, if more packages are installed, where are they placed (/ or /home)?
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.
After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:
Booting 'openSUSE 11.3' root (hd1,2) Error 22: No Such Partition
Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
1. Pentium 4 with 1.8 gh 2. 512 ram 3. 15 gb hard disk. installation specially regarding partition option (eg.. how much alloted should be for swap/ root/home etc)
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
I have finally been convinced to partition my 500GB hard drive from a two partition setup with root and swap to a three partition setup with root, swap, and home. I found a nice tutorial about how to do this, but here is my question:
A) How much space do I leave for the root partition and the home partition?
when I tried to install Fedora on my pc, I got this error message " Defined Root partition not created a / boot/efi partition. I am trying to install it on a seperate hd. My main one has windows xp pro, but I do not want to interfer with that at all?.
I just installed a clean install of suse 11.2. I then installed acct, using yast2.
Finally I did:
sudo /sbin/chkconfig psacct on sudo /etc/init.d/psacct start
So far so good. The problem is that if I know do:sudo /usr/sbin/sa I only see root processes. None of the user processes seem to show up. If I run it with -m flag, I just see a total and a root row, no users show up at all. But I do have user accounts on the machine, and I am working in one of them (only root when necessary).why, or what to do about it? Is there something else that has to be configured? As I understand it, sa -m should show a summary for all users, not just for root. I want to be able to see how much time different users are using.
When accessing terminal; it keeps asking me for my root password....how do I find it? I don't remember it; all the passwords that I thought were the right ones did not work. When I typed password after root password, nothing showed as I typed.
OpenSuSE 11.1 is by far the best SuSE version in a long time. It's generally up to competition or ahead of it. It's admirable, how thoughtful this system is set up, and how clean and fast it is compared to its predecessors. It ssems, that SuSE is fighting its way back to where they came from before the Novell "merger."
Having said that, it is even harder to understand, IMHO, why the installer doesn't support encrypted root partitions. Of course, there is a manual solution:
However, this HOW-TO doesn't explain how to combine LUKS encryption with LVM on a RAID-1 system, as described for Slackware 12.2 here:
[url] [url]
Is there a similar guide anywhere available for OpenSuSE 11.1?
If not: Would it be possible to do all the low-level setup work, like partitioning, setting up the logical volumes and encrypting everything, with Slackware, following the document above, and then install OpenSuSE 11.1 on that system? Would that work?
I am a layman to suse Linux. I have installed suse linux 10.2, I forgot the root user name n password. I went through some of the existing threads regarding this issue but in no avail.I dono wat boot-loader I'm using there is no sign of any boot-loader (either grub nor llo).I tried ma hand in fail-safe mode also, it is also asking for login id. Is there any way to reset the same. As I have some imp file inside.
Accidently ran rm -rf while the pwd was /home/user-name
Now I'm unable to run any command whatsoever as root, ls,vi,cnf whatever, they don't work.
However the commands work as normal user.
I can guess that the files with root ownership in the home folder were deleted but I would like to revert everything back to normal and would like to know how to solve this problem.
I just installed opensuse 11.1 with only the standard user account, not root account. Therefore, my question is regarding this ... is safe running linux with no root account? Should I create a root account for adminstrative purposes? If so, how can I do that?
We have a server for which the root password had been lost, and there were no other user accounts set up. Yesterday evening I attempted to reset the root password by booting from the install CD and using VI to clear the root password in the passwd and shadow files. I then rebooted, and the system has halted with an 'FSCK failed. Please repair manually and reboot' error, with a prompt to 'Enter root password' below. But of course the root password isn't known (I had expected it to blank after editing the passwd and shadow files, but it doesn't work), so I have no way of logging on.
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
Few Days back I have installed a MTS Data Boardband Card in my Suse Linux Server 11.0 Since Then When ever I try loggin using the ROOT A/c The screen with Blue Background and the movable mouse is appearing and the desktop is not showned to me due to which i am not able to get the GUI Mode (My Desktop).
Also once I created a New user in my SUSE LINUX SERVER using that A/c I am getting the GUI Desktop but in root i am not able to get it.
It looks like there is some service which is not getting started and my Root desktop get freezed.
i have windows 7 installed on my laptop and working fine..i want to install Open Suse 11.2 along side. I tried installing by booting with DVD for Suse. But it gave me warning to delete the windows partition.I would like to keep the partition intact with windows 7 and install Suse. Any suggestions ?I can create partition on my laptop but i do not want to modify the current windows structure.
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
I set my swap partition a bit high and now want to shrink it down and possibly merge it with one of my other partitions. I don't have dual boot, just have a second partition on the drive for data. Can I merge these easily?
I moved my NTFS partition with XP and after restarting got the grub> prompt. ls,grub-install and mount are not recognized. find /boot/grub/stage1 (hd0,2,a)
how can I recover? my *nix is osol and I have grub 0.97 (legacy)
I have both a osol and ubuntu cds, but it seems I should be able to load from the grub prompt.
I have just used Clonezilla to copy from a 60gb HD to a 40gb HD. Everything works fine but I now have two partitions (see screenshot) The sda3 was originally unallocated so I used Gparted on the LiveCD to try and expand the sda1 partition but couldn't do that. Then I formated the sda3 to ext4 and thought I could then add it to sda1 but as usual my thoughts were wrong. Basically I haven't a clue what I am doing with Gparted. how to get back to one partition.
