My x window system just crashed . i can only log in through a non graphical interface. i logged in through root and was configuring my network settings . when again started my laptop after 2 hours it is giving me this problem.
View 2 RepliesI was updating my F12 and the system crashed .. no idea why.. anyway I cannot boot anymore using the kernel 2.6.31.9-174, but I can boot using the 2.6.31.6-166 ... now when I issue the yum update, the system says its up-to-date...is there any way to 'force' the yum to update the system again ?
View 14 Replies View RelatedMy system system suffers from frequent kernel panics, which I think are due to gnome-shell with the nVidia driver. (I see no panic message and nothing is logged, but I've enabled magic SysRq and it makes no difference.) Twice this has occurred during yum-update's install stage, which is making me wonder. Uum-update then complained about an unfinished transaction, so I ran yum-complete-transaction as suggested. I've also tried yum-clean-all and rebuilding the RPM database, suggested in other threads, but I'm still seeing the following errors on yum-update:
--> Finished Dependency Resolution
Error: Protected multilib versions: 1:cups-libs-1.4.7-3.fc15.i686 != 1:cups-libs-1.4.6-15.fc15.x86_64
Error: Protected multilib versions: libuuid-2.19.1-1.3.fc15.i686 != libuuid-2.19.1-1.2.fc15.x86_64
Error: Protected multilib versions: krb5-libs-1.9.1-5.fc15.i686 != krb5-libs-1.9-7.fc15.x86_64
You could try using --skip-broken to work around the problem
** Found 23 pre-existing rpmdb problem(s), 'yum check' output follows:
1:NetworkManager-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-0.8.9997-4.git20110620.fc15.x86_64
1:NetworkManager-glib-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-glib-0.8.9997-4.git20110620.fc15.x86_64
1:cups-libs-1.4.7-3.fc15.x86_64 is a duplicate with 1:cups-libs-1.4.6-15.fc15.x86_64
ibus-1.3.99.20110419-9.fc15.x86_64 is a duplicate with ibus-1.3.99.20110419-7.fc15.x86_64+ More errors of that ilk.
I don't know where these 32-bit packages have come from this is an x86-64 system and the only x86-32 stuff I've intended to install is the Adobe flash plug-in. Also the later dupes are different 64-bit versions. I've tried "package-cleanup --cleandupes" as suggested in this thread: [URL]. It wants to remove the old versions, but also wants to remove packages that depend on them, including clutter, so I cancelled that. The first time round I was left with a barely usable system and had to reinstall, which I'd rather avoid, especially if this is going to be a regular occurrence. I'm not familiar with RPM (or kernel panics for that matter).
I was concerned about a number of duplicates reported by yum and was cleaning with package-cleanup (logged in remotely with ssh and vnc) when suddenly all the fonts turned to music and the system froze.
I had run F13 preupgrade as a test to see how it would go...(in case this is important) but had not rebooted yet...
Now when I boot I get the splash and the fedora droplet fills with white, though it gets progressively slower as it approaches the top. Eventually the infinite f appears but that's where it stays.
I have been able to boot to a live-usb stick w/F13. And after some shear panic, I discovered that the root partition is buried in lvm, in a 935 GB physical partition.
I have mounted the logical volume and dd if=/mnt/oldroot | gz > /ExternalBackupDrive/oldroot.gz
so that if I break things further there is a chance that I can get back to a working system.
Is it just that my bootloader doesn't know how to mount the lvm?
Where do I look for clues?
Is there a boot option that will let me follow the progress?
I was learning the bash shell, and playing around with scripts to remove files. I wrote a script, in ~/bin which read something like this: rm -dR $(ls $(~/Music2/*/* )) thinking that I would clear a bunch of worthless files from a test directory Music2. I was in ~/ when I ran the script - it did not act at all like I though and started removing all sorts of stuff. Hit ^C to no effect and then tried to shut it down, which it did in a really messed up way.
When I fired it back up it showed a long list of ext3 errors and at length came into a file system check which failed and dropped my into a shell. Looking in the home folders, everyone seems to be fine except my own - much of the personal stuff has been removed (not the end of the world) and I have this odd file called "Fedora Multi-Desktop" - which I had never seen before. Unfortunately I no longer have ~/bin or anything in it, thus I am not for certain that the above is exactly the script I ran as I can no longer look at it (if not it differs only in the -dR part, which perhaps was just -R)
So how do I get out of this one? Do I delete my user account (if so, how). Do I have to reload Fedora all over ?
Also - why did my script fail? Inside Music2 I had three directories - I thought it would open each directory in there, run a List on them and remove each one in the list so when it was done Music2 would have three directories in it, all of which would be empty. Clearly my test project failed!
I've been running Fedora 12 for a few weeks on a laptop, and was just starting to get things the way I like it ... and last night as I was trying to unlock the screen using the fingerprint reader (which had always previously worked) the system became unresponsive and there was nothing I could do but push the power button. Now it will not boot up, I get one cursor flash when it's at the grub stage and then the screen goes dark, there is no hard disk activity. He's dead jim.
I'm a bit gutted and would like to recover this system if I can, rather than install something else over the top. I booted using an ubuntu live cd and mounted the lvm, and got into the /var/log/messages. The last entries in there before it crashed and burned are as follows:
[Code]...
I had installed Fedora 12. Initially it used to work fine. But then, every morning I start it, the system hangs after booting, I could only get a stable session after 2-3 reboots. This regularly happened and one fine morning, my system finally crashed. What could be the reason? Should I re-install F-12
View 5 Replies View RelatedI started the upgrade to 10.10 and now the upgrade process is trying to get some input in the orange window. Problem is I can't bring that window to the front because metacity crashed. When I try to start metacity from a console it dumps core. How do I continue the upgrade?
View 1 Replies View RelatedI cut paste sys folder, tmp folder, and many more folder to a backup storage place , after that folder icon and other icon converted into txt icon , i can make any folder but can't access, can't open storage, thrash disappear, terminal icon disappear, and also the application and places and system icons, after that someone suggested restarting may help but i can't restart it , so i unplugged the power wire and replugged it and restarted the system but it can't open , all things comes fail, and show INIT: "x" respawning too fast: disabled for 5 minutes. after each 5 mins this msg is repeating
View 4 Replies View RelatedMy Banshee Media Player just crashed, the window to force quit didn't appear, so I opened a terminal and typed "ps aux | grep banshee" to close it using the kill command. I got this output
Code:
As you can see in the 3082 line, the path says /usr/lib/banshee/Banshee.exe... I didn't knew I was backporting Wine to run banshee.
I have configured putty on my RHEL5 pc. i just wanted to know if i can take graphical access of window pc from linux pc?
View 2 Replies View RelatedMy system boots, I login and am brought to my desktop. I click on the file system icon in the launcher to open a Nautilus window. The window opens, but is unresponsive (i.e., I can't move it, clicking on the icons does nothing, etc.). If I press the super key to get the dash and the press escape, the window becomes responsive again, just like normal.
If I open a folder in the window, the window becomes halfway unresponsive in that I can't move the window, but I can select more folders and toolbar icons. The top menu no longer appears at this point, and I can't access any of the system icons on the top right of the screen. Alt-F4 closes the window even if the close button doesn't work.As another example, suppose I open a Nautilus window and then a Chromium window. Both are immediately unresponsive. If I super-esc again, I can move the Chromium window around, and it seems to work normally. I can click on the Nautilus window, but it always stays greyed out. Even if I'm clicking on things in it, the Chromium window always has focus.
I had a similar experience to this with VLC and Chromium. After clicking around enough I eventually got it to the point where VLC apparently always had focus, but I couldn't access any of VLC's controls. Double clicking anywhere on the screen fullscreened the video, and that's all I could really do. Not even escape worked to bring it back.I can usually press super to get the dash and Alt-F2 to get a command prompt. Also Alt-Shift-T seems to usually work to bring up a working Terminal (at least one that accepts commands, even if I can't move the window).Does anyone have any ideas on what might be causing this? The behavior is highly unpredictable and extremely frustrating. I should note that key commands don't always work, even though they seem to in my examples. So I don't think it's just a mouse issue.
I was wandering around the system parameters and saw that there was an option to activate a non-open nvidia driver for my Asus Emachine EL1200 with Ubuntu 8.04 install (pre-installed, worked fine for a year now). So I did. However, when I restarted, my screen resolution was changed to 800*600 or so, no good. Although I could not see the right part of the same "nvidia" window, I managed to deactivate the driver. Regretfully when restarting the screen resolution was still 800*600. I thought it was 1440*900 for my Asus VK192S-B (checked it on internet) but it didn't work (did not check the refreshrate at that time). So I stared to fiddle around and stupidly accepted a 1280 * 800. As I said before the resolution is completely f***up now. I have about 4 copies of my desktop and the worst part is there are lines over it and I can not see what the windows say. I manage to get the resolution config screen, but can not get the right optios selected, working "blindfolded".
I looked at this helpful forum and identified the /etc/x11/xorg.conf file as the important file. Also I saw a xorg.conf.failsafe file with my original config! With the recovery cd of Asus I managed o set up a live session and actually can open the xorg.conf file and see the damned line with 1280*800. Regretfully the original /etc folder as well as the original home folder cannot be written in, or copied. Permission problems, as could be expected. I have some backup, but not of quite a lot of photos I uploadd from my camera recently. Reinstalling from scratch is fo the moment not an option.
Cannot see System > Administration > Login Screen / Login Windows in Fedora14. how to get it or any command to be used?
View 2 Replies View RelatedI updated squeeze last night for the first time. It worked fine after 1st reboot last night. There was one reboot stalled at "hald" so I shut down and restarted. Worked ok 2nd time around
Today,upon login I got a string of taskbar notification (which I couldnt read as they all overlapped . I was able to see a kernel error message but couldnt report it (network was down) or save it (USB stick not recognised) Some programs worked, others didnt
I have the partedmagic rescue distro on USB stick so have those programs to use in order to fix the problem. Any idea how I can repair this? I tried fdisk for the hell of it. reported clean partition as predicted. I am using debian-testing-amd64-kde.
for some reason my system crashed while installing a package. Now I get this error every time I install/remove a package. I have tried re-installing, removing, forcing options, 'dpkg --configure -a', dpkg-reconfigure. Nothing has worked.
Code:
A package failed to install. Trying to recover:
I was trying to upgrade to 10.04 (from 9.10 x86_64)when the update manager crashed without any warning or errors. it happened while the packages were being installed, as a result of which i could no longer login into gnome. so i logged in using the terminal and since i had cleaned the cache before upgrading i ran sudo -i dpkg *.deb (there were a large number of deb files in it, so i thought those were the upgrade packages) but the process couldn't be completed. it said that there were too many errors. after rebooting, gnome doesn't start and i can see lucid development version in the terminal. it also didn't detect my usb keyboard.do i have to reinstall ubuntu.
View 3 Replies View RelatedIs running fsck -f sufficient to ensure my data is OK? Heres what's happenedy system crashed during a gparted operation. I was pretty sure however, that the data was OK since given the size of the drive and the amount of data and were it was when it crashed, I figured the crash occurred while moving empty space.Bottom line is I think the data is OK, but I am wondering what else I can do to check it.When I first ran fsck after re-booting the system it said it was clean. I then did fsck -f and it found and fixed errors in phase 5 (group summary). Now when I run fsck -f I think it's clean?fsck from util-linux-ng 2.17.2e2fsck 1.41.12 (17-May-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
[code]....
My 10.04 system just crashed for 'no reason' .
Looking through the system logs the rtkit daemon was started up a bout a minute before the crash. Is there a better place to see if my system has been compromised? What should I look for?
I was updating my netbook to the 11.04 when it crashed (I thought is was on the grid, what do you think? it wasn't!) Now if I try to do it again I get a notification and then it stops.
These are the last few lines of/var/log/dist-upgrade/main.log:
2011-05-07 11:15:47,352 DEBUG entry 'deb [URL] natty main #Third party developers repository' is already set to new dist
2011-05-07 11:15:47,353 DEBUG examining: 'deb [URL] natty partner'
2011-05-07 11:15:47,353 DEBUG entry 'deb [URL] natty partner' is already set to new dist
2011-05-07 11:15:47,354 DEBUG examining: 'deb [URL] maverick main'
2011-05-07 11:15:47,355 DEBUG entry 'deb [URL] natty main' updated to new dist
2011-05-07 11:15:47,405 DEBUG running doUpdate() (showErrors=True)
2011-05-07 11:15:48,260 DEBUG openCache()
2011-05-07 11:15:48,261 DEBUG failed to SystemUnLock() (E:Niet vergrendeld)
2011-05-07 11:15:48,620 DEBUG /openCache(), new cache size 1668
2011-05-07 11:15:48,622 DEBUG needServerMode(): run in 'desktop' mode, (because of key deps for 'ubuntu-desktop')
2011-05-07 11:15:48,623 ERROR No 'ubuntu-minimal' available/downloadable after sources.list rewrite+update
2011-05-07 11:16:13,016 DEBUG abort called
2011-05-07 11:16:13,027 DEBUG openCache()
2011-05-07 11:16:13,028 DEBUG failed to SystemUnLock() (E:Niet vergrendeld)
2011-05-07 11:16:13,440 DEBUG /openCache(), new cache size 1668
2011-05-07 11:16:13,442 DEBUG enabling apt cron job
I was running CentOS 5 with VMware Server on top of it. The system died and I'm trying to recover the VM images. The system died with a 'end_request: I/O error, dev' type message. It looks to me like the 2nd partition is wonky - is that correct? The GRUB portion does boot. I pulled the drive out and plugged it into my Ubuntu box to see if could get to the files. I ran 'fdisk -l' and found:
--------------------------
Disk /dev/sdb: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
[code]....
To me this shows the GRUB boot partition and the system drive - correct? Next I created a mount point and tried 'mount /dev/sdb2 /mnt/recover' At that point I get a
mount: unknown filesystem type 'LVM2_member'
Here's where I'm a bit lost. I believe I need to add filesystem support to my Ubuntu box. I've been looking but have yet to find something that says the default filesystem of CentOS 5 is <blah>. After I do find that info, how do I install the filesytem support to read the drive?
How can i find a the process that crashed my linux system,
I only have the below information available.
from /var/log/messages
Mar 1 21:14:31 localhost kernel: fown: signal 29, pid 1211
Mar 1 22:00:17 localhost kernel: fown: signal 29, pid 1211
Mar 1 22:07:52 localhost kernel: fown: signal 29, pid 1211
[Code]....
Also I don't have kdump enabled.
I am assuming that this is due to overloading of the server.
This server runs an Oracle Database..
I have Fedora Linux 13 64bit system. I use System Monitor to check which process is taking how much memory and cpu. Normally I have dozens of Chrome and Firefox windows open. The Processes tab shows which process is taking how much cpu/ram resources but I unfortunately there is no option like right click and make the window active that matches the PID (the one process that I have currently highlighted). Usually there is a chrome process taking up 30 or 40 percent of CPU while dozens other chrome processes taking much less cpu. I must determine which chrome window ( or any application which has multiple instances running) is taking that much CPU time. So can some one help me to solve this problem?
View 1 Replies View RelatedI tried to upgrade two hardy them to 10.4 lcui and failed miserably. after upgrading, both fail to finish rebooting process; they stuck at maintenance mode. are there ways to rescue them? something went very wrong...
View 2 Replies View RelatedI installed a fresh version of squeeze, with kde, and it worked fine. After I untarred my backup /home and /etc, things came to a standstill. I got a final ERROR code after /home. After a restart I got a 'fix your system' warning requiring a Control-D, which I couldn't type. I had used tar -xzvpPf ...... If I had included a -w, which asks for confirmation before overwriting data, could I have prevented this problem.
View 1 Replies View RelatedMy ubuntu 10.04 pc crashed (hardware). The hard drive from the old computer would not boot in the new machine.I am able to access the data on the old hard drive, and I was able to copy the .evolution folder from the old hard drive to the new one. How can I get the mail, and contacts from the old hard drive to appear in Evolution on the new pc running Ubuntu 10.10.
View 1 Replies View RelatedI have recently come across a Debian installation page for powerpc: viewtopic.php?t=20481. It got me motivated to fix the Debian I have on my iBook G4. I have a Debian Lenny installed on my iBook G4 -- but I have been having some sort of problem (mostly likely due to hardware) which causes the system to crash. After the latest crash, the clock on iBook has been readjusted. For this reason, I cannot reboot Debian completely.
Every time I turn on the computer it begins the booting process but before I get to my desktop I encounter numerous error messages concerning my clock. After either OK'ing or canceling these error messages, I get to my desktop but the system by then is either frozen or else not working at all. Worse, I can't even turn off the computer since the upper right corner of the desktop is completely blank and I have no menu to turn off or reboot the system.
It took this computer to a local Apple store and they ran many different hardware diagnostic tests on it. They concluded there's "technically" nothing wrong with the computer. But they said although the system has successfully passed all hardware tests, there may still remain some complicated but slight hardware glitch/es which the hardware diagnostics could not pick up.
Crashed System left at root @ maintenance shell. Below is the sequence after boot, with Exact Errors. How to Salvage important files from my crashed laptop hardware.
A) Via a Transfer to a USB stick in Terminal, would be ok
B) Via SSH through the router from the good laptop that is Preferably using Nautilus / GUI, Terminal also ok (less confident of my skill here)
C) Directly Fixing Laptop and being ably to use Nautilus / GUI to Copy Files to USB stick, localy
The result of some effort:
A) the USB stick is good but Can't get in to it from the crashed laptop
B) SSH: No luck I get: "Cannot display location "sftp://192.168.1.101/"" from the good Machine
C) at a lose here...
The Crashed Laptop is:
Ubuntu: 9.10
Linux: 2.6.31-22-generic
Gnome: 2.28.1
CPU: Intel Atom N280 @ 2GHz
NO: CD / DVD Drive
(USB Boot maybe possible? Have not made a Bootable Ubuntu USB Yet)
BOOT:
GNU GRUB Version 1.97~
Ubuntu, Linux 2.6.31-22-generic
etc / (& recovery mode)
Mini Ubuntu logo or splash screen
File-system checks are in progress sticks every time at 4%
init: mountall main process (418) terminated with status 3
#(it seem to count up every time I re try to boot ? (init: mountall main process (423)(429)(etc)
Mount of filesystem Failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
root@Bi-Ji-Ben:~#
I can navigate around but cant get the GUI up
root@Bi-Ji-Ben:~# nautilus
could not Parse arguments: Cannot open display:
A good USB stick reads & writes in another laptop running Ubuntu 9.10. When I connect the USB to the Crashed Machine it starts with:
"assuming drive cashe: write through", and hangs on this tell I press: "Ctrl+C"
In the crashed machine I can't seem to get into the USB anywhere that I think it should show up and trying to "mkdri" got me:
"Read only file system".
i wanted to upgrade my ubuntu system to meerkat beta via update manager like i upgraded it the last 5+ times.
a bug showed up that i can recall from updating files previously: some software installtions via update manager triggered the programm nicotine+ (i think is was something like man-lib or man-db that, when called by the installtion programm, would trigger nicotine too). since i can close that nicotine+-window and the installation process isnt bothered any further i didnt mind.
now with this upgrade, i had to close nicotine+ around 5 times since it got triggered together with some of the files that got updated/installed in this upgrade.
and then what happened: GError something about an "unrecognized image file", it concerned a py file that was named "nicotine"...
so i waited for 10 mins and figured out that the update process had stopped. i couldnt resist and logged out, wanting to delete nicotine from my system and to reinitialize the upgrade. well, nothing works since then, grub only lets me choose different kernels which didnt help much as there was no way to startx.
my question is:
how can i reset this upgrade mess or bring this pending upgrade to an end? can i do an upgrade via network, based on the emergency shell that comes up in some kernel-recoverymodes? or should i burn a livecd, boot it and then do what? repair? try another upgrade? delete nicotine?
having 'consumed' ubuntu for years now i still wouldnt know what else to do then posting here.
I wasn't doing anything special on my computer (Ubuntu 11.04) when it just turned off. When I rebooted I was presented with BusyBox. I'm still pretty new to linux, but it appears that root is totally empty. Is there a way to view a log before the system crashed?
View 9 Replies View Related