Which is the best whole hard disk encryption software for RHEL 4.6. Tried Truecrypt but was not success in making it work. First had issue with fuse version, then with glibc and etc.
View 5 RepliesI was trying to install Fedora 9 on my new laptop that came with Win XP. I have selected the option to wipe out all partition and create a default layout with the Encryption option selected. But that installation got stopped on the middle, therefore I have started the installation again. This time it asked for the encryption password as expected but don't know why, its not accepting my password. I am 100% sure that the password is correct but it is not allowing me to enter into the hard disk partition section.
My question is, how do I remove encryption from my hard disk? I don't need to preserve the data, I just need to use my hard disk again. Is there any boot CD that allow us to format encrypted disks without prompting for a password?
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
how much of a performance impact full disk encryption (say, AES 256-bit) has on disk-related activities? On one particular project I'm involved in I am trying to weigh out security vs performance issues.
View 1 Replies View Relatedi want to deactivate disk encryption. How can i do that?
View 1 Replies View Relatedmount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedBitlocker is a harddrive encryption data protection tool which comes with Windows Vista Ultimate and 7. Does anyone know an equivalent for Linux distros like Fedora and Ubuntu?
View 3 Replies View RelatedThe only reason why I don't use Linux (even though I prefer Linux over Windows, and can do everything faster and more efficiently) is because each time I try to learn about dm-crypt I give up.
Can someone point me in the right direction for full OTFE on Linux (like TrueCrypt)?
1. Fedora 14 has a user friendly disk encryption setup.However, there doesn't seem to be an option to change the encryption parameters during setup. Since I can handle the overhead, I would like to change the encryption algorithm and the key length for the default install.
2. I have created an additional encrypted drive (the entire HD) which claims to have its own encryption functionality (Seagate Constellation 1TB). Does Fedora use the built-in encryption mechanism by default? Is there any way to tell?
3. I can't seem to find any utility to tell me what the actual key size is for different HD's I have encrypted. "cryptsetup --help" seems to print out only the information for the default encrypted O/S which is the default 256 bit.
My problem is whether the -s option work when set to a 2,048 bit key length? Or, does it fall back to a 256 bit key length if it fails to do so? Or, does it automatically use the built-in encryption of the hardware? If the -s option doesn't work with a 2,048 bit key setting, can the kernel be recompiled to do so?
Quote: The importance of security should never be underestimated. The consequences of losing data can be disastrous for any organisation. For example, the loss of a single unencrypted laptop may have huge repercussions. This could include breaching data protection legislation with the risk of a significant fine, a loss in the confidence of an organisation, as well as the risk that sensitive data may fall into the hands of a competitor or third party with malicious intent.
View 1 Replies View RelatedI do know about cold boot attacks. But I ran across a couple of posts/websites that had me wonder if it is possible, without the passphrase, to just remove the encryption?
View 4 Replies View RelatedI would like to configure my Debian Jessie system in this way.
Two partitions:
1) /boot on /dev/sda1
2) everything else on /dev/sda2
I want to encrypt the second partition with LUKS. And then install over it a LVM volume. Inside the LVM volume i will create the / (root), /var, /opt and /home virtual partitions. In this way, i'll get asked only once for the password to decrypt all partitions. Because if i don't use LVM, then i'll get asked for the password for each encrypted partition.
I can follow and understand almost everything of this HOW-TO for Archlinux: [URL] ....
Only two passages are unclear to me:
1) Configuring mkinitcpio
I don't understand what i should do here in order to complete this. What should i do in Debian to configure "mkinitcpio"? what is the equivalent thing to do here?
I thought that the kernel would automatically recompile itself with all installed modules on the Debian system, once cryptosetup/LUKS or LVM2 get installed.
2) Configuring the boot loader
I don't understand what should i write in /etc/default/grub. Will GRUB automatically load the LUKS and LVM2 modules? Also, I don't think that i could boot the system in this way:
cryptdevice=/dev/sda2:LVM root=/dev/mapper/LVM-????
Actually the "root=" volume is the whole volume to mount as LVM. It isn't the final root partition.
With all the talk about disk encryption for Apple devices, I wanted to ask about how full disk encryption compares between debian linux and mac OS X. Is the code for debian linux fully available for people to inspect for flaws or backdoors? Apparently although part of the encryption code is available for OS X the full code for Filevault 2 is not public. What are the advantages and disadvantages of each method of encryption for each operating system?
View 8 Replies View RelatedI have currently a file server that runs on Fedora 9, and all other PCs (mostly running Windows XP) access the file server via SAMBA. Everything works perfectly! However, lately a home invasion in my neighborhood got me thinking. If they take my file server, my data is not protected. So, I would like to implement the LUKS partition encryption (/home) which sits on a separate disk. However, I don't quite like the decryption process at boot time. In other words, I would like to wake up the file server (WOL) remotely, and when it's done booting, I would like to log-in using the other PCs and enter the passphrase remotely to decrypt /home. Is this possible using LUKS encryption (i.e., cryptsetup)? If not, what would be another alternative to what I am trying to do using a secure encryption (so that the data is safe from thieves)?
View 4 Replies View RelatedIs there any way to remove the whole disk encryption without reinstalling? I'm running Ubuntu 10.04.
View 2 Replies View RelatedIs there a way to change the password for the whole disk encryption?
View 2 Replies View RelatedFor some reason I can't find any documentation re: the algorithm(s) used by Ubuntu to encrypt the filesystem... Anyone know what it is?? AES?
View 2 Replies View RelatedI have a bunch of pictures that I thought I had backed up but as it turns out I didn't, the problem is I formatted the drive they were on.
It is a 1TB hard drive, and it was running Ubuntu 10.10 using full disk encryption from the alternate install CD. After formatting, I installed Ubuntu Server 10.10, also using full disk encryption.
I know the encryption key for both installs (and the keys in fact are the same).
I have turned off the machine, and have stopped writing to the disk. I am hoping because it is a 1TB drive, and I have only written over it with 2GB of data, that there is a chance I can recover the data.
I managed to get a cheap refurbed netbook recently (Samsung N150) and I'm wanting to put Ubuntu on it. As it's also likely to be used when travelling and have things like chat logs, photos, and other such things I'd like to do full disk encryption. Also I've been pointed towards 10.4 as apparently the 10.10 netbook desktop isn't to everyone's taste.
So I tried using unetbootin to make a bootable 10.4.1 i386 Alternate usb stick, which hit the problem of no cd drive. I found an item to add to the boot (cdrom-detect/try-usb=true) which got it a little further, but at a copying stage it threw an error saying it couldn't copy off the disc.
Finally I tried making a unetbootin of the mini iso (does mini even support full disk encryption?) but that seems to hang after selecting a mirror.
EDIT: Well it seems I was just impatient on the mini ISO and after a few minutes it's gone onto time-zone, though of course this could get rather tiresome without a local mirror, especially given this may go through more than one iteration.
Is there a way to install ubuntu 10.04 or 10.10 with full disk encryption? I read how to do it in the 8.0 version, was wondering if it is still possible?
View 4 Replies View RelatedCopy of IBM Server hard disk data to Another USB External Hard disk?
View 2 Replies View Relatedany incompatibility for an encrypted disk (i.e. impossibility of reading the file system) among different versions of the same distro or among different Linux distros.
View 1 Replies View Relatedthis isn't really a security question, per se, so feel free to move. It is related to full disk LVM encryption though. Full disk didn't work for me with grub2 after running dd to a remote server, so I downgraded to grub1. No biggie. However, I have neither grub or grub2 as selected in Synaptic.Let's say I forget which I have installed. How would I determine what version of grub is installed at the moment. I'm assuming it's somehow installed on in the mbr but not on the OS. I didn't mean to do anything funky. Is that the normal setup? I'm deploying these systems to users and want to be able to troubleshoot issues in the future (hopefully that will not be needed!) grub --version does not work because it is not installed.
View 2 Replies View RelatedI encrypted a harddisk via Disk Utiluty. What alogythm is it encrypted by now? Is it safe? What should I be aware about?
View 7 Replies View RelatedI am investigating full disk encryption and have made a DD copy of the hard drive which has been encrypted, this DD file is stored on my computer for analysis.
First question is - Anyone know how i can access data in this DD file even though its been encrypted?
Second question - Is there a DD command where i can image the systems memory? I ask this because when a system is turned on, to get past the pre-boot authentication stage you need a password. From what i understand, this password will be passed in to ram when power is applied to the system. Making a copy of the memory will also copy the password?