Programming :: Set A Recursive Function As Inline?
Feb 3, 2011Is it good to set a recursive function as inline? I would think it would increase the performance speed of the program.
View 2 RepliesIs it good to set a recursive function as inline? I would think it would increase the performance speed of the program.
View 2 RepliesI was going through a file known as linux-2.6.34/kernel/timer.c and found following code.
static inline void
timer_set_base(struct timer_list *timer, struct tvec_base *new_base)
{
timer->base = (struct tvec_base *)((unsigned long)(new_base) |
tbase_get_deferrable(timer->base));
}
I want to understand what is it doing. What is the meaning of static inline in above? I searched and came across
[Code]...
It's good that GCC support intel inline disassembly syntax, but it cannot even simply address local variables/parameters properly, making itself stupid and essentially useless, look at the following:
int myfunc(float f){
int x;
float fa[8];
asm(".intel_syntax noprefix
"
"mov eax, [x]
[Code]...
Code:
#include <iostream>
using namespace std;
[code]...
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedThis is my sub;
Code:
sub projName
{
print "Enter project name: " ;
$PROJ = <STDIN>;
print "";
[code]....
I can call this routine and it works fine when I enter a valid name for $PROJ. If I enter an invalid name it goes to the else block and prints the statement. However, it does not call itself. Instead the script just exits.I've googled 'perl recursive subroutines' and the example don't appear to be doing anything different.
I am looking for a one liner to search for a string in file(s) which are in a tar ball (.tar.bz2 in my case)
Code:
-bash-3.2$ tar -tjf /var/log/ABC/07142011-1412.tar.bz2
var/log/ABC/07142011-1412/
var/log/ABC/07142011-1412/live_hosts.txt
var/log/ABC/07142011-1412/all_hosts.txt
var/log/ABC/07142011-1412/LOGS.txt
How can I recursively look inside all the txt files in this tar file ?
I have the following test code fragment:
Code:
When I try to run it 'sh' reports the following message^
Code:
You might understand what I mean with that test code so could you recommend how to achieve the required effect?
I'm trying to make recursive makefile work but it's giving me two problems. I have a top folder with the main Makefile and one Makefile for each sub folder 'one' and 'two'. Makefile in subfolder 'one' and 'two' are identical. The top Makefile (still a bit messy) looking like this:
Code:
# Directories
CC = gcc
CFLAGS = -Wall -Wextra
TARGET_DIR = bin
MAIN_FILE = one.c
[Code]...
I'm having problems with compiling recursive Makefiles in my directory structure:
My folder layout is:
top/|- one/|- one.c (With main function)|- zero.c|- two/|- two.cin my top folder the make file looks like:
Code:
MAKE_DIRECTORIES = one two
.PHONY: all
all: $(MAKE_DIRECTORIES)
.PHONY: $(MAKE_DIRECTORIES)
$(MAKE_DIRECTORIES):
@echo $@
$(MAKE) --directory=$@
in my one and two folder I have the following Makefile:
Code:
.PHONE: all
all:
@echo $@
$(CC) $(CFLAGS) *.c
But when I compile it from top folder: make
I get following output:
Code:
one
two
Which states that directory statement by echo in main Makefile is ok but the files are not compiled in one and two.
I'm wanting to mod some PHP files across a hierarchy and thought I'd drive it with find + grep + xargs
I built up a command line which I was confident would do the job, but now can't save the results.
First I tried this:
Code:
find . -name *.php | xargs grep serialize | cut -d: -f1| sort -u | xargs sed -i s/serialize/serialise/g
but that didn't work:
Code:
sed: illegal option -- i
so I thought I'd try using
Code:
[Code].....
Way to test permissions on all files/folders into a folder recursive, then if those are not user:user then do :
Code:
chown user:user thatconcernedfile
The problem with that
Code:
chown user:user -R /folder
is that it is doing changes on file permissions whihch are already ok. If you wanna maintain a specific permission on a folder this is really not good this :
Code:
while [ 1 ] ; do
chown user:user -R /folder
# /folder contains 6.0 Tb
sleep 2s
done
I'm starting bash shell script and I'm looping without any solution.
I'm trying to find some files under a folder hierarchy and in case of errors moving these files to a destination folder under the same hierarchy recreating this hierarchy if not exists.
Finding all ._* files under /src and moving them to /dest recreating folder1 or the others which contains ._* files but without moving files which does not correspond to the pattern.
Code:
I tried find command and I'am getting all needed files
Code:
But I don't know how to use the output to get the parent folder of files which are found to
1- create folder with mkdir -p /dest/folder1 or /dest/folder1/folder4
2- move found files from /src/... to /dest/... with rm command
I'm working on a find command as this trying to do all in the same line but ... little lost
Code:
I want to declare a function in a function, but had no success till now, see the error code below and visit the project at sourceforge
[Code]...
I'm testing HTML5 for the first time, using Firefox (beta) 4.0b8 and SeaMonkey (beta) 2.1b1, and its ignoring some CSS. Specifically, I have problems with the <details> tag. (It is nested in a paragraph...I am using it to provide an in-paragraph definition in hopes it can be toggled.)
Firefox only partly supports <details>. It's not supposed to show anything except the content of <summary>, unless you click on <summary>'s content. Instead, it puts a line break before the content of <details>, splitting the paragraph in two peices (which looks silly), without the "closed/open" functionality.
So I tried using "display:inline" in my CSS, but that gets ignored. Just for fun, I also tried "display:hidden" (also ignored) and "display:none" (obeyed).
SeaMonkey doesn't doesn't do anything special with the content of <display>...but it also ignores the same CSS as Firefox.
The only thing I can do to support semantic design is apply "font-style:italic" to all <details> elements.
Granted, you might ask, "why bother using <details> at all. then?" Well, I would like to have <details> for the browsers that support it, with the "font-style:italic" to degrade the page nicely for those that don't (such as for SeaMonkey).
Does anyone know why "display:inline" and "display:hidden" get ignored?
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....
fit a surface i.e. W(x,y) using svdfit() provided by "Numerical Recipes in C". svdfit() is written for curve fitting and not for surface fitting.But one can use svdfit(), as claimed by authors of NR book, to do surface fitting. On page 680 of NR book, authors have given a hint on how to use svdfit() for fitting a surface. But I have not understood it.This link may be helpful (Chapter 15 th is relevant here.):[URL]This is my problem:
Code:
I have a set of 100 numbers. I want to fit a 2-Dimensional function W(x,y) to these numbers.
[code]....
I am running opensuse11.4. When trying to forward emails I can only do so as attachment. When I click and hold to select the forward inline option I get an empty email - same as if I would have clicked new. The same happens when I place the inline button on to the toolbar. Is this a bug with Kmail or is there another setting to forward mail inline?
View 1 Replies View RelatedI am running a Cron job which mails the content of a log report every day. The problem is that the contents are sent as an attachment instead of as the body of the email. The strange thing is that if I run the instructions from the command line everything works fine, but if I do so from the Cron job the log report is attached instead of being sent inline.
The instruction I use is:
Code:
mail -s "logfile for cron" cron@example.com </var/log/cron-log
Following some advice I read on a blog I also tried this instruction in my Cron file, but the result is the same: it works fine from the command line, but attaches the report when run from Cron:
Code:
echo "Content-Type: text/plain;" | mail -s "logfile for cron" cron@example.com </var/log/cron-log
How to ensure the content of the log file is inline?
I can insert an image inline with mutt by using attach, then using ctl+d to make the image appear inline. However, it appears below my signature. If anyone knows of a way to make the image appear above the signature, I'd be grateful for their input. (This is with mutt 1.5.21--usually sent from a Fedora 14 machine, but I haven't found the behavior to change with the platform.)
Unfortunately, it's necessary to do this at work, for a particular daily email. The workaround is to use Thunderbird for this particular email, but I'd much prefer to use mutt.
I have a question about calling an asm function from C....It doesn't work unless I create an asm variable to hold the value of the function in....Why?Here's the code that doesn't work...
asmfile.s - version one Code: .section .data
mydata: .ascii "this is the message!
.equ mylen, . - mydata
[code]...
I want to use backtrace() function to debug a crash issue. I tried this sample code to see how backtrace works. backtrace() function always returns 0 with the below code. Is there any kernel configuration that needs to be set for proper working of backtrace?
#include <execinfo.h>
#include <stdio.h>
#include <stdlib.h>
/* Obtain a backtrace and print it to stdout. */
void
print_trace (void)
[Code]...
Can you offer me the code about fmod() in C. I want to know how this function work, i am very interested in it because i have no idea to implement it, i want to know... how to write the function... not 'how to use the function' can anyone post the source codes of this function here?
View 6 Replies View Relatedi have an open source application that was developed in C++ (it uses objects and namespaces all over the place). I also have another application that was developed in C. Now i am trying to insert the code made in C into C++ application, but when i do that , i get this error on compilation of the source code:
Code:
error: 'mpi_init_vars' was not declared in this scope the function mpi_init_vars() is not part of object oriented programming and it doesn't belong to any scope, it was compiled into an object file and i am linking it with all objects of C++ application.
How can invoke the C function from C++ object oriented code?
I am trying to build a function inside a script.
Code:
#!/bin/sh
#System commands and other configurable.
IPT=/sbin/iptables
IP6T=/sbin/ip6tables
IPST=/usr/sbin/ipset
MODP=/sbin/modprobe
GET=/usr/bin/wget
INT_NET=192.168.1.0/24 .....
I can find lots of tutorials in how to use if, then, else. However, how do I define a variable inside the function?
SEE>>
Code:
for c in $ISO
Also, am I using the 'test' command correctly( -/+ week as valid test)?
I am doing a web site program and what I need is to call a C program in the PHP cloud.Do u think it would be possible? The web site would get the user input from PHP UI and pass to the C program , the C program would process the function with the user input and output the a PHP page.
View 2 Replies View RelatedI ask if a c++/c function is able to know its name from inside itself:
example:
Code:
int funct1(int a,b)
{
printf("%s ",funct_name());
}
or with a trick.
Code:
#!/bin/ksh
(...)
# FILL UP PARTITION
diskfillerfunction () {
[Code]....
Test 15: fill up partition /usr/bin/time: cannot run diskfillerfunction: No such file or directory
I am obviously omitting (...) a lot of the code, but the relevant part is all there. How do I 'time' a function?
I wrote a spinner in Perl and when I did a spinner in shell I could just run the subroutine in the background.
[code]...
In Perl, how do you run a function in a background and get the PID for that? I know PID in Perl is $$
I know what is the functionality of the sleep() method.
for(i = 0; i < length; i++){
sleep(1000);
printf("%c
", message[i]);
}
Result :every print of the message will be takes 1000sec of gap but i want to know why wee need to use the Sleep function. where exactly it is useful