I have a perl/python interpreter available on the system so really as long as the script would run on a standard linux build I'll be happy.So I don't know how to program a script that would find the unique key (which if needed, can be easily stripped out and put into a separate file) and then print out the data below it without going into the other lines.
View 4 RepliesI am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
How can I set indent in .emacs to enable my new line starts from the same position of previous line?
like this;
Hello world <enter>
Second Hello world // "S" starts right under first line's "H"
At the moment I have a flat file which is being used by a few people. I want a script to remotely change the file, so I can start logging who is doing what.At this point here is one requirement I am trying to develop. We have text blocks who pretty much look like.I hope this is somewhat clear. I try to find $param for the right $workflow and change that. Can you help me to find $$var3 and change that?
View 1 Replies View RelatedAfter running the following command, I get:
[root@yukiko /]# find / -iname .bashrc
/home/clamav/.bashrc
/home/vpopmail/.bashrc
/etc/skel/.bashrc
/root/.bashrc
But I would like to have a command that prints a specific line by supplying the command with the line number, for example:
[root@yukiko /]# find / -iname .bashrc | getline(2)
/home/vpopmail/.bashrc
Is there such a command on CentOS?
I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
Sample input $FileName
Code:
Code:
Code:
Script so far:
Code:
I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies View RelatedI've written a script to parse a file and print each line that ends with matching pattern, if the next line is blank. The pattern lines are the result of md5sum $i|sed 's/path///g' so that only md5 and filename appear. Here's what I'm using.
Quote:
for fline in `sed -n '/.*.ext$/p' file1`
do
if [ "`sed -n -e '/'"$fline"'/ {n; p;}' file1`" == "" ]
then
echo ""$fline" has no info" >>file2
fi
done
[Code]....
I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
I want to print the line number with the pattern of the line on a same line using multi-patterns in sed. But i don't know how to do it. For example, I have a file
abc
def
ghi
I want to print
1 abc
2 def
3 ghi
I am using an awk command to print a line from a cvs file.the awk command includes an if statement that filter the output-lets say i want to print all the lines that the price field is greater than 30.i have it working when i put the parameters myself.. but when i try to send them with vars it wont work..i am sending the sign of the if statement - can only be: == , < , >it looks like this:
cat file.csv | awk -v sign=">" -v field="2000" '{if($3 sign field) printf "%-12s%-12s%-12s%-12s
",$1,$2,$3,$4}' FS=,
the bold part is the problem , because when i put the sign parameter myself t works great.. i guess its a chars issue but i cant spot it
I have a directory where there are folders and in them some .txt data files. I am trying to output a .txt file with the folder name and the number of .txt files in it using gawk. However, when I run my shell program, because print is nested in a "while" loop, gawk overwrites what's already saved in the output file. I want gawk to print "new" output in a new line without overwriting the already existing text in the output fil
#! /bin/sh
# getting the folder list and the number of folders
ls | gawk '{print}' > ../folder_list.txt
[code]...
As you know, in C++ you can use setfill(char c); and setwidth( int length) to fill a line of a character.
It's line making a line of a character for output
Code:
NAME DEPARTMENT LOCATION
==========================================
Pete R&D Chicago
...
==========================================
As you see, a line of a '=' character drawn to output.
I'm wondering, how can I draw this line in C using printf() to format?
( no loop or repetiton )
I have a requirement to print images (two to be precise) from the command line of a given size and without losing too much quality.
So, I may have two images, a.jpg and b.jpg which may be 4x4" and 6x4" respectively (the sizes may vary). I need to be able to print both these on a single sheet of paper (one under the other) at a given size for each - so a may be 2x2" and b may be 3x2" - the aspect ratio will always be maintained (or as near as possible!)
I am currently doing this a very messy way (because I don't know any other way!!) - basically I am converting the picture to a given size using a set density using convert and then concatenating the two using montage.
Here is part of my script:
Code:
Don't worry too much about the case statement at the end - that is just to be able to select to print either A, B or A and B.
The issue with this is that is doesn't work great if the aspect ratio is not maintained perfectly and also, it loses quite a lot of quality on the print.
I have a very old windows app which I wrote years back in VB (o dear! ) which does the same thing and the quality is fine (I am running it through wine). I want it to be command line though because I want to run it as part of other scripts etc.
I've never programed shell scripting.
Code goes like so:
I simply want to read a file "data.txt" line by line Then char by char and add them into a result var. The file is supossed to always contain numeric values
I have a project due for my Intro to C++ class and we are suppose to generate a file listing that will take an input of a C++ source code with .cpp extension and make a copy of it with a .lst extention that will have a line number preceding each and every line.
View 12 Replies View RelatedI wish to add information to one of my files based on matching IDs,
Here is an example
(the id is the 3 colunm)
(the ID is the 2 colunm)
And the output i wish to be
OUTPUT:
So as you can see the ones that do not match are still present, and the ones that do match just have the extra information from file2.txt added to them.
I thought about using join but that only seems to join the ones that match displays thoes only. i would like all the information in the output file.
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
Was wondering if any perl guru's could help me with a quick log file adjustment. I have a text file that looks like so (tabs and newlines are revealed so you can see what separates the data):
There are maybe 100 lines of text in this file at any given time. I need to delete all duplicate lines only looking at the first bit of text prior to the first tab. It doesn't matter which one gets deleted as long as there are no two lines that begin with that same text at the beginning before the first tab. So in this example, either the fist line "1234" or the last line "1234" would need to be deleted. I already have code in my script that opens the files - I just need the code to read the text into an array and the part that would find matches based on the above criteria, and make the deletions.
If it would be easier, I can even do a system call and use SED (v4.1.5) and/or AWK (3.1.5) instead.
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedI have a set of files containing data that I need to re-arrange into one single property list.
The files that I have look like this:
Code:
# cat uk
<string>10</string>
<string>11</string>
...
<string>29</string>
[Code]....
So the lines in the files match up but I haven't found a way of reading several files line by line.
I'm extracting data from a xml file writing it to separate files then combining the results as a csv file.The problem is keeping the separate files in sync line by line.When a grep does not action I would like to put in a blank line or something to keep the lines in order.When the "<title>" is missing as in as in the first"<programme </programme>" that's where I need somethingto write to the file as dummy data to increment the line
here's the data
Code:
<programme channel="15552.dvb.guide" start="20100504200000" stop="20100504204000">
<category>Show / Game Show</category>
</programme>
<programme channel="14498.dvb.guide" start="20100504200000" stop="20100504203000">
[code]....
I'm trying to make another file annotation script a little speedier than it has been by the up-until-now proven method of checking the last four characters in a filename before the "dot" (eg .jpg, .psd) against a list of known IPTC categories and Exiv2 command files. It occurred to me that if one script generated a list of files in directory foo, and the same or another script sorted that list by that four-letter tag,then that list could be used(instead of a for/do/done loop on the real files in the folder) by the command-file-matching script to "vomit out" which annotator file would go with file nastynewfile.jpg, f'r'instance. The script I had been using for this task looks like this:
Code:
while read 'line';
do
sp=$(echo $line)
vc=$(echo $sp | cut -d"," -f1)
cv=$(echo $sp | cut -d"," -f2)
[code]....
Where I seem to be stuck is with how to sort the lines in templist, which may be any number of different lengths, from back to front. sort -k looked promising, except it seems only to work the other way round. I thought of invoking a
Code:
q=$(expr length $line); echo $q
n=$[q-8]; echo $n
kind of thing, but that presented the problems of how to sort by those, how to tell sort where to find them (grep?) and how to "stitch them back in" to the original list, which is what I want to sort in the first place.
I have a log file with entries such as;
Where result is 0 or more.
I want to get the list of file names where result count is more than 0 (in other words filter out files names with result 0).
File name and result are in two different lines in log file.
How can i filter file name based on result?
I'm a bit new to Python programming and hoped that someone might be able to help with a problem I'm having. What I essentially want to do is to combine two text files line for line. I know how to do this in a bash script so to give you a better idea here's the code for that:
Code:
This is basically for adding on values to the end of a CSV file that uses ';' as the delimiter. So say file1 said:
And file2 said:
Then running this command would create merged_file1_and_file2 which would be:
The code I'm using at the moment is:
Code:
As I'm sure any experienced python programmer will see, this prints out the first line of the file "csvraw" and then all of the lines of "stamps" and then the remainder of "csvraw".
What I'd like to do is something like: (pseudo code, I know it's not python ;-))
Code:
Is this possible? I've tried googling and my Python Pocket Reference hasn't been much help. I've looked at pickling but that doesn't seem appropriate.
I have a wrapper script called MAIN.sh that runs several other script. It looks like this:
Code:
#! /bin/sh
script1.sh
[code]...
In C, I want to make a program that will take a file and replace it with a file that's nearly the same but with some minor changes. Also, I would like to point out that I'm still fairly much a beginner with C. As for an example of the file, I want to take something like this:
Code:
Random Crap
More Random Crap
Even More
Something That Changes XXXXX
[code]....
I figured the best way to go about doing this was to open the file and a blank file, read the original bit by bit and when it gets to the point that needs to be changed exchange the part that needs to be changed with what it should be changed to, delete the original file, and rename the new one to the correct name. So the first problem I've run into (and I'll probably have more) is that when I'm trying to read stuff from the original file, my program doesn't seem to be finding the original. I'm sure much of my problems will be just from not knowing how to use the C functions so bear with me. Right now I have the following:
Code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
[code]...
And when I try to run it I get the following:
Code:
Died Here: No such file or directory
Segmentation fault
Right now the length of 50 was just a random test length. Pretty much I was just trying to get it to read anything from the file. In the end I'm going to want it to read the entire file bit by bit, but at the moment I can't seem to get it to read anything.
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...