Programming :: Library To Send Mail Via C/c++ Code
Sep 10, 2010Is there a library to send mail via c/c++ code in linux ? Or what can I use ?
View 1 Replies
ADVERTISEMENT
Security :: Reset Facebook Password,facebook Send A Code To E-mail,this Code Can Be Sniffed By Sniff Software?
Jul 18, 2010for reset Facebook password,facebook send a code to e-mail,this code can be sniffed by sniff software?
View 2 Replies View RelatedProgramming :: Basic PHP Mail Function \ Say 'and If 'email' Is Not Equal To 0 Then Send The Mail?
Sep 9, 2010this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
Programming :: Use Javamail For A Project To Send Mail Rather Than Using 'mail' Or 'mailx'
Nov 30, 2010Was told that I need to use Javamail for a project to send mail rather than using "mail" or "mailx". Has anyone here done this?Any pointers or sites you've used and can recommend?
View 1 Replies View RelatedProgramming :: Link A Code In C++ With Tinyxmldll Library
Jul 1, 2010i am trying to link a code in C++ with tinyxmldll library:
Code:
master out # ls -la
total 1388
drwx------ 2 root root 4096 May 10 14:02 .
drwx------ 6 root root 4096 Apr 5 08:35 ..
[code].....
When i link, i get 'undefined reference' error:
Code:
master hneat # make nt
g++ -g -DTIXML_USE_STL -DHCUBE_NOGUI -fPIC -I./hneat -L./hneat -I/home/niko/hyperneat3/HyperNEAT_v3_0/JGTL/include/ -I/home/niko/hyperneat3/HyperNEAT_v3_0/tinyxmldll/include/ -I./Experiments -I../ -I./ -L/home/niko/hyperneat3/HyperNEAT_v3_0/tinyxmldll/out/ -L/usr
[code]....
The problem is, the symbols contain weird characters. How do I tell g++ that it should ignore these characters and link the functions correctly?
Programming :: SDL Code Optimisation / Change Of Library For Low End Systems?
Mar 23, 2011I have a question about choice of library to be used on low-end systems. I've so far been using SDL to create a user interface for a media system, and it's been working fantastically on my development machine, a dual core 2GHz machine with 2Gb RAM and an Intel graphics card. I get a frame rate of up to 100fps, and there is no slowdown at all. However when I run the exact same program on an embedded motherboard, the VIA EPIA EN15000G, which has a 1.5GHz processor, and a VIA P4M800 graphics chip (possibly the worst graphics chip ever invented as far as Linux support goes), I get a frame rate of less than 5fps. This makes the entire program totally unusable, and I've been left in a bit of a pickle. I've looked into alternatives like SFML, but that looks like it won't help at all on an unaccelerated system. I've also tried using OpenChrome drivers on it, and that made a negligible or nonexistent difference.
Can anybody suggest anything I could look into re: optimising my code or changing libraries goes? I already use SDL_DisplayFormatAlpha to convert my surfaces to the correct format. I haven't looked into Dirty Rectangles yet massively, as there's not much movement at all on the GUI, just the changing of button states.
Would use of OpenGL help at all if using the OpenChrome driver, which apparently has 2D acceleration? I'm more than willing to totally overhaul the code if needs be.
Programming :: Link Code With The Real Time Library Using Qmake (.pro)?
Aug 23, 2010I am trying to write suitable .pro file for my application. I need real-time library. Have you some ideas how to do that? I just need the line for linking with real-time library...
View 2 Replies View RelatedProgramming :: Find Source Code Of C Library Files In Ubuntu?
Feb 26, 2009Where do i found source code of c library files in ubuntu.
View 2 Replies View RelatedGeneral :: Set Nagios Directives To Only Send One E-mail Per Alert Without It Flooding Mail Boxes?
Jul 20, 2011I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedGeneral :: Sendmail Error / Unable To Work On WAN / Can Send Mail But Not Able To Recieve Mail?
Nov 15, 2010I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedUbuntu Networking :: Evolution Mail / Send Mail Saving To Current PC But Not To The Other PC?
Apr 20, 2010I use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies View RelatedUbuntu :: Can't Send From Own Mail Server With Mail Client (Thunderbird Or Evolution)?
Jun 1, 2011I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
Server :: Send Mail From Unix Mail Command To Yahoo-id With Attachment?
Feb 15, 2010i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedGeneral :: Debian Mail Server As A User Send A Mail With Attachment Maximum Wight Is 5 Mb
Jun 8, 2011How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedServer :: Configure Mail With Postfix & Cyrus-imap - Cannot Send Mail Through Command Line
Nov 19, 2010I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
Ubuntu Servers :: Can't Send Mail Using PostFix - Only Receive Mail
Jun 30, 2011I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
Networking :: Send Mail - Internet Mail Server Seems Not Working At All
Mar 30, 2011i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
Software :: Debian Mail Server Won't Send Or Receive Mail
Apr 22, 2010i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
Software :: Exim - Send A Mail Message Of The Form Mail
May 4, 2010I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
CentOS 5 Server :: Cent OS 5.4. - Send A Mail With Mail In Console
Apr 21, 2010i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies View RelatedGeneral :: Receive Mail Fine But Cannot Send Mail
Feb 25, 2011I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
Software :: Mail(x) On 12.2 Does Not Send Mail To Local Users
Feb 27, 2009I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
View 4 Replies View RelatedServer :: Send Mail Won't Accept Mail
May 21, 2010I have a bit of problem setting up sendmail on my server. I've gotten so far that I can send mail from my mail server and relay mail from my LAN computers through it. Also, local delivery seems to be working.The problem is receiving mail from other domains. When I send mail from my gmail account to any user in my domain the mail gets delivered back to gmail as it exceeds the max hop count.The mail gets bounced between my ISP mailserver which I use as smart host and between my server.The problem seems to be that my mail server won't accept any mail it is supposed to receive.
View 8 Replies View RelatedProgramming :: SDL Static Library - Shared Library ?
Apr 7, 2009I'm reading about shared, static, and dynamic libraries. What is SDL? Is it static, shared, or dynamic?
I always thought a library would be a lot of .h and .cpp files compiled separately into .o files and then if you compiled your own program you could use the -l parameter to link the library and it was all compiled together. Now I'm not so sure.
I don't even see any SDL .cpp files in my system anywhere. All I have are lots of SDL .h files in /usr/include/SDL and I don't really understand the code in them.
I'm making a wild guess here: SDL is a shared library. SDL itself is NOT compiled into my program, therefore SDL must be on any system my program tries to run on. When I compile and link SDL all it needs is the header files to know what SDL function and objects it can use. And then on every system it uses an already compiled SDL shared library thingy somewhere.
So... where is that part of SDL? All I can find are header files.
I'm thinking the advantage of shared libraries is that someone could say update SDL on their own system and take advantage of the new features without having to download new executables with the new version of SDL compiled into them for every program that uses SDL.
So if I'm making an editor and a game engine and they both use a lot of the same .cpp and .h files that I wrote and I'm tired of updating one and then the other and I need to turn them into a library, then a shared library might be kind of a silly solution. I could just make a static library. Right? Because it's not SDL. Nobody else is ever going to use this library.
Server :: How Long Normaly Keep The Mail Server Send Mails On The Outbox Queue And Try To Send
Apr 8, 2010How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies View RelatedGeneral :: Compile A C Code Which Uses SSH Library?
Jan 26, 2011i try to compile a c code which uses SSH library,but i get this error
Code:
libssh.h: No such file or directory
i searched and i found that This happens if a library used for linking is not present in the standard library directories used by gcc.
By default, gcc searches the following directories for header files:
/usr/local/include/
/usr/include/
and the following directories for libraries:
/usr/local/lib/
/usr/lib/
i update my libssh from libssh-0.4.2-1.fc13.i686 to libssh-0.4.6-1.fc13.i686, and there are files called libssh.so.4 and libssh.so.4.0.2 in /ur/lib, but i still can't compile it with this command:
gcc test.c
Ubuntu :: Any Link To Get Source Code For PThread Library?
Aug 27, 2010Can anyone please let me know of a link where I can find the source code for Linux pthread library?
View 2 Replies View RelatedUbuntu :: Install A Library - LibRaw-0.8.5 - From Source Code
Jan 28, 2010Ubuntu 9.10 is the running system. I need to install a library (LibRaw-0.8.5) from source code as the version I need is not present in the repositories. So far, I managed to extract the .tar.gz, but now I have no clue how to install it and make it work with DigiKam... I tried the sudo make install stuff, but it seems I don't do it right or what
View 12 Replies View RelatedGeneral :: Including Lzo Compressor Library In Source Code?
Apr 11, 2010I have downloaded lzo-2.00 package and have installed it linux kernel 2.6 version. Now I want to include the lzo library in the source code of linux.According to the instructions given in the package, I have copied the files (minilzo.c,minilzo.h,lzoconf.h,lzodefs.h)in the source directory(/mm),added minilzo.o to my Makefile and have included(#include minilzo.h) from my program. But when I compile the kernel,I am getting errors.
Errors:
->limits.h:No such file or directory
->assert.h:No such file or directory
Ubuntu :: Code Library Required By VISA Not Located / Loaded
Mar 31, 2010I need to create a test setup in my lab that will run power supplies for an indefinite amount of time. It could be anywhere from days to months at a time. This rules out matlab, as its memory leaks won't let it run that long, and LabView is too buggy (at least in my experience. and it has memory leaks as well). So I need a way to program GPIB (since that is the interface these power supplies have). So far, PyVISA seems to be the most likely way to be able to do this.
However, I keep receiving the following error:
Code:
pyvisa.visa_exceptions.VisaIOError: VI_ERROR_LIBRARY_NFOUND: A code library required by VISA could not be located or loaded.
Searching around, this apparently means that I'm missing GPIB drivers, but I'm not.
linux-gpib installed, and the card appears in /dev.
That being said, every now and then the gpib interfaces simply disappear from /dev,and the only way I can get them back is to reinstall linux-gpib. Also, has anybody else succeeded in working with GPIB outside of LabView and Matlab, and if so how? I'm also open to other options, having made no progress on this after over a week. The two real requirements is that I need programming interface to be scpi commands, and I would prefer to code in python or C/C++.